Question about Hitachi P42H401 42 in. Plasma HDTV
Problem with Hitachi P42H401 42 in. HDTV Plasma... I have a 42 inch Hitachi plasma tv that is making a very loud static noice coming from the internal speakers. It stays at a contstant very loud volume unless I completly mute the tv or turn the volume completley down to 0. Picture is fine. Removed all components (dvd player, cable box ect) even just TV over the air. I have tried unplugging the TV for 30 minutes and it still happens.
Based on what you have tried if a buzz or loud static via the speakers you have something wrong in the audio output circuit of the set--problem here is that circuit may be part of the Main board that processes all signal---a look inside---following the speaker leads back would lead you to that board.
A simple thing to do to narrow it a little (you may have done this) is with sound all the way off put your ear to the internal speaker--hear anything at all like a deep hum?
Depending on age of set and cost of the board likely bad it may or may not be a do it yourself repair.
Posted on Apr 26, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
there is no cable slot. the monitor is not a receiver. it has no tuner in it. it will need a signal from a tuner box. and that must be fed to the tv with an hdmi cable or a dvid cable for hd to work. see your manual for further information on cables. see your cable supplier for information on hd boxes available in your area. if you do not buy hd service, you will not get an hd signal. so you will see little difference from a non hd device. your dvd player may have hd capabilities, but will also need the same cable to deliver true hd signal.
the good news is that its fixable by using the right equipment.
Posted on Dec 28, 2007
now do you have a cable box if you do disgard
if not tray to rescan for chanels and after the tvv is done scaning
no for resting the tv to the manufacter setting after going off
and that would take care of the problem
Posted on Aug 05, 2009
Tips for a great answer:
Feb 17, 2008 | Hitachi 42EDT41 42 in. HD-Ready Plasma...
Jun 06, 2012 | Hitachi 42HDT79 42 in. Plasma Television
Jun 24, 2017 | Hitachi UltraVision 42HDS52 42 in....
Jun 01, 2009 | Vizio P2 42 in. HD-Ready Plasma Television
Nov 24, 2017 | Philips 42PF7320A 42 in. Plasma HDTV
Oct 02, 2008 | Televison & Video
672 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: