Question about Canon PowerShot SD750 / IXUS 75 Digital Camera
I turned my camera on and the screen is completely black, so i took a picture and the picture comes out dark as if someone is covering the lense
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Problem with my camera
Go here and search knowledge base for E18: http://www.usa.canon.com/consumer/controller?act=SupportDetailAct&fcategoryid=224&modelid=10599 Issue: Lens will not move and camera may display an E18 or "Lens" error. Solution: Possible solutions for an E18 or Lens Error message PowerShot SD300 The "E18" or "Lens" error message indicates an error that involves the lens unit or lens cover. This error may appear where the lens is prevented from properly extending or retracting such as, for example, when pressure is applied to the lens or the area surrounding the lens while handling the camera. The error may also be displayed if the lens unit/camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera. Solution Check the following when you operate the camera to avoid applying pressure to the lens and surrounding area: * Hold the camera so that your fingers do not touch the lens unit when you are shooting. * Make sure the camera is off before the camera is placed back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case. If you cannot clear the error code by turning the camera off and then on again, or if the error code is displayed frequently, a camera malfunction may have occurred.
Posted on Mar 07, 2007
This problem is caused by a stuck shutter assembly. Normally the shutter is open which allows light to enter the image sensor and show you the live preview you see on the screen. When you take a picture the shutter closes which allows the image sensor to record what was seen at the exact moment the shutter closed. The shutter is stuck closed, causing the image sensor to always be in the dark. These shutter assemblies are extremely small and delicate. The miniature parts can become jammed with just the slightest bit of oil or contaminant, or the slightest misalignment of components. The problem can sometimes be fixed by gentle tapping of the camera on a solid surface. If you are going to try this be VERY careful, and do not tap the camera on the buttons, lens, or battery door. If this does not solve your problem then the camera is going to have to be taken apart and the shutter cleaned and reset to allow free movement. This repair costs $125 to $145.
Posted on Jun 16, 2007
With the power off, hold the camera in your palm and smack the front of the camera on your leg or arm. You might have to smack it a few time to get it to work. It has to do with the camera CDD lense (shuttle) being stuck. By smacking it around, it will free up the lense. Being extra gentle with it though. It worked for me. Hope this help.
Posted on Nov 11, 2007
The Digital Rebel XTi doesn't have 'live view' mode, you can't see what you're taking a picture of before you take the picture.
Darntoothysam com - Digital camera parts and repair.
Posted on Nov 11, 2008
Tips for a great answer:
Jun 08, 2017 | Panasonic Lumix DMC-ZS3 Digital Camera
Jun 17, 2009 | Panasonic Lumix DMC-FX12 Digital Camera
May 08, 2009 | Fuji FinePix Z10fd Digital Camera
Nov 06, 2008 | DXG Technology DXG-305V Digital Camera
Apr 16, 2008 | Cameras
Apr 13, 2008 | Canon PowerShot S2 IS Digital Camera
Dec 09, 2007 | Kodak EasyShare P712 Digital Camera
Nov 15, 2007 | Casio Exilim EX-S500 Digital Camera
Aug 31, 2006 | Fuji FinePix F601 Zoom Digital Camera
105 people viewed this question
Usually answered in minutes!