Question about TitanNet TITANTANKLESS. COM PRESENTS THE TITAN SCR2 WHOLE HOUSE TANKLESS WATER HEATE

1 Answer

My Titan N160 does not stop heating when the hot water is turned off, the red lights stay on. The water is extremely hot, pops the reset button. Sometimes if I turn the faucet hot water on and off sev

If anyone has an answer, do you also know where to get replacements parts?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Your Titan water heater most likely have a bad SCR. Check the link below:
Titan water heater doesn't stop heating after I close the hot water

Posted on Aug 17, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: scr2 titan water heater. No hot water. Both red

look in in user manual and the lights should be codes to whats wrong

Posted on Apr 29, 2010

heatman101
  • 43501 Answers

SOURCE: I have a Titan SCR2

Hi,
Have you tried the reset button???


http://www.fixya.com/support/t2879586-titan_scr2_stopped_working

There is very little help for these...you can also try the number on the unit for service, but I've heard that they are worthless also...

Other then that check for power at the elemenst and see if you are getting power to them but they are not heating... this would indicate a bad heating element...


heatman101

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Titan SRC2 N120. the water is not heating.


Appears to be Electric. Check circuit breaker box first. If it is popped you may have a problem with installation. If it pops again
you have a serious electrical problem. Call electrician or installer.
Reset circuit breaker and still no lights or heat. Hopefully you have a warranty. If for some reason it "ran" without water, it has burned out the element. Unusual since there are sensors that verify water is moving.
Hope this helps.

Feb 27, 2015 | Water Water Heaters

1 Answer

Pilot light on hot water heater is out


you need to shut off the the red nob and turn the nob off in front take the cover off remove the heat shield turn the nob on top to pilot use a piece of paper to light put in next to pilot and hold button down for 20 to 50 secs pilot should stay lit turn nob on front then burner should kick on then you should be all good

Mar 21, 2012 | Water Heaters

4 Answers

Scr2 titan water heater. No hot water. Both red


On the left side of the board there is a 10K 5Watt resistor that gets loose from the board because of overheat and it needs to core solder back with soldering iron.

Apr 28, 2010 | TitanNet TITANTANKLESS. COM PRESENTS THE...

2 Answers

We used to have hot extremely hot water in both bathrooms. One day, the water became warm and ultimately cold in one of the bathrooms. Now, the water is also freezing in the bathroom where the water used...


Your check-valve has most likely failed at the switch.
The flow check valve works by opening when you turn the water tap. When it opens it closes a switch which turns on your heating elements. When this switch fails you will still have water flow, but no heat. Titan has parts for this but you will need to call their service Dept.
7cd99f4.gif
or call
Toll free support pesonnel hours (EST): Monday-Friday: 9:00am - 5:00pm
toll_free.gif
They also have an online support operator during normal business hours here
http://www.titanheater.com/livehelp/livehelp.php?department=2

Mar 24, 2010 | TitanNet TITANTANKLESS. COM PRESENTS THE...

1 Answer

When turn on the hot water only the top red and green lights are on and the water is not hot


is it wired correctly..check all your wiring
if its a new install call the place of purchase or the manufacturer


Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Feb 05, 2010 | TitanNet TITANTANKLESS. COM PRESENTS THE...

4 Answers

Titan SCR2 Stopped working.


I have the Titan SCR2 N-120. You may have a different model. On mine if you are looking at it just a inch below & 1 inch to the left of dead center will be a round black sticker(it has some white lines like at&t's logo). there's a pin hole in the middle of the sticker that you can poke to reset. Or turn the breaker off then take the 2 screws out of the top of the unit. It's just a thin metal cover that you can pull back & look inside. You'll see a red circular button thats the reset button. It's right behind where the hole I was talking about & what gets pushed in. you'll also be able to see if anything burned out & can get replacement parts at titanheater.com . One of my heater elements had burn/ melted & I've ordered a replacement. It was $17 + $11 s&h but still cheaper than $200 new unit from e b a y. Best of Luck

Sep 03, 2009 | TitanNet TITANTANKLESS. COM PRESENTS THE...

2 Answers

Titan Tankless stopped working this morning.


I have the Titan SCR2 N-120. You may have a different model. On mine if you are looking at it just a inch below & 1 inch to the left of dead center will be a round black sticker(it has some white lines at&t's logo). there's a pin hole in the middle of the sticker that you can poke to reset. Or turn the breaker off then take the 2 screws out of the top of the unit. It's just a thin metal cover that you can pull back & look inside. You'll see a red circular button thats the reset button. It's right behind where the hole I was talking about & what gets pushed in. you'll also be able to see if anything burned out & can get replacement parts at titanheater.com . One of my heater elements had burn/ melted & I've ordered a replacement. It was $17 + $11 s&h but still cheaper than $200 new unit from e b a y. Best of Luck

Jul 27, 2009 | TitanNet TITANTANKLESS. COM PRESENTS THE...

1 Answer

Water heats for about 3 seconds and goes cold


Take the cover off and look for reset that has trip.If you can't find no reset turn the power off and wait for five minutes,turn on and turn water on also to see if you get hot water.

Mar 14, 2009 | TitanNet TITANTANKLESS. COM PRESENTS THE...

Not finding what you are looking for?
TitanNet TITANTANKLESS. COM PRESENTS THE TITAN SCR2 WHOLE HOUSE TANKLESS WATER HEATE Logo

618 people viewed this question

Ask a Question

Usually answered in minutes!

Top TitanNet Water Heaters Experts

Gene Haynes

Level 3 Expert

5353 Answers

kenneth pancoast
kenneth pancoast

Level 1 Expert

29 Answers

David Spradling
David Spradling

Level 3 Expert

10322 Answers

Are you a TitanNet Water Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...