Question about Hunter 21871 56'' Ergonomic Brushed Nickel Ceiling Fan

Open Question

Hunter ceiling fan 21871 canopy

How do you remove the canopy from the mounting bracket?

Posted by on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Rich

  • 351 Answers

SOURCE: The canopy doesn't seeem to fit flush up against

You just need to wrap it and tuck it .. You might need to cut some of the fan wires shorter so there is not so much bulk under the canopy cover. The fans are shipped with enough wire leads to be able to use a down rod, They can be cut shorter when the fan is being installed.

Posted on May 06, 2010

Ad

kenneth daniel jr

  • 57 Answers

SOURCE: How does the receiver of

if you look at the mount bracket where the ball of the fan fits in to it should fit right above the ball in the mount bracket and if it can fit loose in the canopy thats ok to just long as ou can get the bell housing back up

Posted on Jan 23, 2011

sedlewis

  • 1 Answer

SOURCE: I have a Hunter 21871

I'm trying to do just that right now...looking fir a little help with wire color identification. I'll advise you if I have luck.

Posted on May 10, 2011

dchandyman

  • 1 Answer

SOURCE: Trying to remove the Hunter

http://www.hunterfan.com/uploadedfiles/Support/Owner_Manuals/41803.pdf

Page 8 of the model 20761 Hunter ceiling fan shows how to remove the canopy trim ring. Ours had double stick tape holding the brushed nickel to a plastic trim ring. Dropped it, then squeezed the plastic ring.

Posted on Oct 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove fan mounted close to ceiling?


There should be side mounting screws in the canopy which attach it to the mounting bracket. The screws are removed to allow the canopy and motor assembly to drop down free of the mounting bracket. A convenient hook is provided to allow wires to be disconnected.

Oct 23, 2015 | Hunter 20461 Brushed Nickel Ceiling Fan

1 Answer

Where does the receiver go on a model 59016 hunter fan


It goes in the canopy cover at the ceiling. Slide into bracket.

Aug 01, 2014 | Hunter 52" Ceiling Fan With Light And...

1 Answer

Can't fit remote receiver into canopy of Hampton Bay ceiling fan.


Hang the fan and slip the receiver between the space above the hanging ball on the fan. Hunter remote might not work.

Mar 15, 2013 | Dryers

1 Answer

Trying to remove the Hunter Stratford II 52" ceiling fan. The canopy ring rotates approximately 1/4 turn but does not release.


http://www.hunterfan.com/uploadedfiles/Support/Owner_Manuals/41803.pdf

Page 8 of the model 20761 Hunter ceiling fan shows how to remove the canopy trim ring. Ours had double stick tape holding the brushed nickel to a plastic trim ring. Dropped it, then squeezed the plastic ring.

Sep 19, 2011 | Hunter 20761 52'' The Stratford II Brushed...

1 Answer

How does the receiver of the Hunter model 21871 ceiling fan attach to the canopy? There are two things on the receiver that seem as though they should connect to the canopy with slots but no slots in the...


if you look at the mount bracket where the ball of the fan fits in to it should fit right above the ball in the mount bracket and if it can fit loose in the canopy thats ok to just long as ou can get the bell housing back up

Jan 23, 2011 | Hunter 21871 56'' Ergonomic Brushed Nickel...

1 Answer

The canopy doesn't seeem to fit flush up against


You just need to wrap it and tuck it .. You might need to cut some of the fan wires shorter so there is not so much bulk under the canopy cover. The fans are shipped with enough wire leads to be able to use a down rod, They can be cut shorter when the fan is being installed.

Mar 02, 2010 | Hunter 21871 56'' Ergonomic Brushed Nickel...

1 Answer

Fan removal


first- remove the fan blades, next around the canopy there are three screws. remove these and the canopy will drop down. the fan will be hanging on a semi round ball in the mounting bracket. the circuit board should be accessible above the bracket.

Aug 18, 2007 | Hunter 20531 Vista Brushed Nickel Ceiling...

Not finding what you are looking for?
Hunter 21871 56'' Ergonomic Brushed Nickel Ceiling Fan Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

Joe Paxton

Level 1 Expert

9 Answers

Paul Bade

Level 3 Expert

1662 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...