Question about Computers & Internet

Open Question

Configure for talon dvr

Have a talon 32 dvr wich is available over the internet how do I configure IP cam viewer pro for Iphone access..to the system

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: remote access to DVR behind router

 I have the same model and had the same question as Desi501. I'm a novice at networking, but not at computers. I'm using macbook pro with 10.4.11, and PC's with XP, and Vista.
Here a link or the mannual: <a href="http://www.umphotobank.com/dvr-manuals/PBD-4DVR-2120-Manual.pdf" target="_blank"

Posted on Mar 05, 2008

Ad
micromaster
  • 3614 Answers

SOURCE: Best Picture Quality - JPEG2000 DVR - Netopia 3347

Just reinstall agin the firmware or update it & take a soft reset of the unit

Posted on Mar 07, 2008

  • 46 Answers

SOURCE: Can't Access Web configuraton for Cnet CWR-854 Wifi router

Have you try to update the firmware by any chance?


Let me know

comier957

Posted on Aug 10, 2008

SOURCE: Can't get internet access for my 6th computer

try reinstalling the LAN

Posted on Sep 07, 2008

efs_perpends
  • 1996 Answers

SOURCE: how do i configure my ip address manually for 2nd

Have you tried simply running the Network Connection Wizard from control panel? Here is a link to a basic guide. I'm not sure I understand whether there's an issue with the connecting computer or if you want to set up a host/client shared connection. If the latter see here. Does this apply to your situation?
Take a look at this post, and also see the FAQ sections of the same site for endless help.
You can also access 2wire tech support here.
If you think there may be some corruption in the 2nd computer, run chkdsk according to instructions here and here.
You might also have a look in the Device Manager and make sure the network adapter is working properly. It will show an exclamation point or question mark if it's having problems.
Your connection is behind the 2wire firewall, which should be turned on. If you mean your system firewall, OK for now...

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Posted on Jun 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to find dvr ip address


Hi,
what do you want the DVRs local IP address on your LAN or your internets public IP address?

to see the local IP that the DVR is on, check the menu's in the DVR as if configured properly you should have it set up as a static IP on your LAN...

if you can not find it there, you should be able to log into your router and view connected devices... some routers are better than others, but you will probably only be able to see devices that are connected and assigned an IP address from your routers DHCP table..

if you want your public internet IP address then go to http://cmyip.com but in order to view your DVR from a different location on the internet you will need to set up port forwarding on your router - the DVR manual should show what ports need to be forwarded...

you may also want to consider using a dynamic DNS service if you do not have a static IP from your internet provider... most DVRs that I have encountered provide a dynamic DNS service..

Thanks,

Sep 15, 2014 | Computers & Internet

4 Answers

Cctv


Use Free DDNS Services
Create Free account.
Visit:- https://www.noip.com/ CCTV Networking Technical Support

Dec 25, 2013 | Digimerge H264 16 CHANNEL DVR WITH USB CMS...

1 Answer

I cannot access my internet viewer


More details are required.
The Samsung 'SmartViewer' program starts up on a computer. You can access it whether you have a recorder or not.
The Samsung 4 channel DVR has a menu to set IP address & ports to use and a netjack to connect to internet. You can access the DVR from any computer connected to the same router as the DVR by inserting the same correct info into 'SmartViewer' as in the the DVR.
Once you open the required ports in your router, port forward the router to the DVR, any incoming requests from the internet to view should connect and with the correct password you can view your security cams.
With minor adjustments..that's it.
What didn't you do?

Dec 25, 2012 | Samsung 4 Channel Dvr

1 Answer

I have a H.264 DVR with system V2.00.R05. What app or system can I use to view on a iPhone 4S?


IP CAM VIEW found in the Itunes Market: http://itunes.apple.com/us/app/ip-cam-view/id471794610?mt=8# should work as long as you have the network settings properly configured in both your DVR and Home Network. I recommend setting a Static IP for the DVR on your Home Router. After you have assigned the IP goto the network settings on your DVR and input the IP Address you assigned, the SubnetMask of your Home Router(usually 255.255.255.0 or 255.255.252.0), and the Gateway of yourHome Router.(i.e. 192.168.0.1/192.168.1.1/192.168.1.254). While you are on your Network screen I recommend changing your default TCP Port andHTTP Port to something that is not commonly allocated. As with most Routers you must Create a pinhole in the firewall to allow the outside traffic in. Select your DVR's IP on your Router and Create Definitions for both Ports that you set on your DVR's Network Menu. If your DVR and Router didn't reboot after saving these changes reboot.On the phone ap I found the following two cameras to work with the H.264 DVR System V2.00.R05:
  • Make: Unknown Brand Model: DVR-9008HV
  • Make:A.V.Sistemi Model:A.V.Sistemi 61xx DVR
For the Host/IP field, You use your Home Routers Internet IP. TCP port is the number you set on the network menu of your DVR. Ch.# is the Channel Cam (1-8, and 9 being a single feed of all 8 channels)user names and passwords are case sensitive.
I hope this helps

Jul 07, 2012 | Apple iPhone 3G

1 Answer

Samsung SHR-1041K. Cannot connect to DVR system "Unknown Error"


Samsung 1041k DVR - Camera Web Server Solutions. ' UNKNOWN ERROR' OR 'CANNOT CONNECT TO SERVER'

Holy Smokes! Can't anyone write a simple solution? The manual totally sucks. It tells you everything except the details that will complete the puzzle. The answers here, so far, are written by gearheads who can't write an easy sentence.
.
1. The user name is case-sensitive. So if you program the DVR with a user name it will only take capital letters by default ... so when entering the user name (USER ID) in the web setup ... It MUST BE CAPITAL LETTERS otherwise you will get an 'unknown error'. There is no mention of this important little fact anywhere....

2. Use Internet Explorer ONLY (becase of old Active X controls), not FireFox, Chrome, or Safari...etc...etc. IE9 doesn't like it either .. just goes white for the most part or flickers ..so IE8 seems to work best.

3: When programming the DVR Box using the MENU button and the 'NETWORK OPTION ...Use Port 6100 in the NET CLIENT PORT. In the WEB SERVER PORT use port 80. The difference is ... port 6100 is used for the basic connection of the network to the DVR device and camera hardware and software ..... and port 80 is for viewing through Internet Explorer. (Port forwarding in the router must direct those ports right back to the IP address of the DVR (whatever you set it to). TCP and UDP together work just fine... not necessarily one or the other . I tried it both ways .. they all work.

4. If you are lucky enough to finally get Internet Explorer to hit the DVR software via the correct IP address and port of the DVR.... then it will prompt you to install the Active X control software embedded in the DVR. You might hae to refresh the screen a couple of times for it to download and install. If indeed it does then you will get a blank box that will wait for you figure out you need to click on a little wrench to configure the DVR connection. Add the DVR (give it a name). Enter the IP address it was configured with .... and set the port to 6100. Remember to capitalize the User Id and put in the password and save .. Completely IGNORE the confusing little matrix boxes that are used for setting up multiple DVRs and cameras. Save the setup, it wil take you back to the blank Samsung box interface and wait till you figure out to hit the connect button in the center. If you did it all correctly then you should connect to the camera views..

4. If you are going to view the cameras from the home network .... then enter the IP address assigned to the DVR PRECEEDED by http:// . Believe it or not it seems to make a difference. If you are viewing from ..say .. your work.. put in the numerical address of your home IP address and if you have the port forwarding set up correctly you will be forwarded directly to the DVR camera software where you can sign in and see the screens.

I have set up many, many IP cameras and various DVRs and software packages professionally.. I must say that this DVR and software is not very intuitive and was very difficult to get past some of the issues. The included instructions were of little help. I hope this helps somebody else.

Gary

Jun 28, 2010 | Samsung 4 Channel Dvr

1 Answer

Can't view my cameras


The DVR will be programmed with an IP Address via the DVR main menu function (network settings) and a valid password. The network viewing software (web viewer) you will need to ensure that the IP address is entered correctly for your DVR along with your valid user password.

Trust the above info is of assistance if you require a manual in order to check your settings try this link http://tv.manualsonline.com/manuals/mfg/samsung/samsung_dvr_product_list.html

May 23, 2010 | Samsung 4 Channel Dvr

11 Answers

Internet connection to DVR fails with error


Any one interested in a class action against Q-See for lack of support even though this is one of the selling points?

Aug 27, 2009 | Internet Q See Ufo CCD Camera

2 Answers

Cant access lorex DVR from the internet


u need a public ip with an open port, and portforward the port with the ip of ur dvr

Mar 15, 2009 | Home Security

1 Answer

Off site access to view security camara dvr


access the router look for portforwarding and enable port forwarding assign a name to your camera
type in the port your camera use. ex 593
then type the assign IP for your camera ex 192.168.1.6

to access it type in your browser the your public IP ex. 209.45.0.0:593
read your ip cam manual for accesing it.

Nov 12, 2008 | Computers & Internet

2 Answers

Remote access to DVR behind router


Hi Desi

I would like to give you step by step parameters to fix the problem. However there is no enough information. Model of DVR is important so we can know what kind of configuration it requires. Also your steps, What you have done so far? Have pinged the IP address of the DVR? usually DVRs doesnt require a special DNS configuration most of them works like IP cameras. If you provide the model info I can I can try to provide guidance accordingly.

Thanks

Jan 14, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?

Open Questions:

0 Answers

aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...aVg TeCh SuPpoRT pHoNe {*@'#,{1+888'4995520-}...

Oct 17, 2019 | Computers & Internet

0 Answers

avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7avg support PhOnE nUmBeR @$ 1.{888.*499.*5520}*.24*7

Oct 17, 2019 | AVG Computers & Internet

Computers & Internet Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Ekse

Level 3 Expert

13434 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...