Question about Kenmore 15218 Mechanical Sewing Machine
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I have an old Kenmore and here are the directions from my manual: 1. Draw thread from spool through bobbin winder tension discs. 2. Wind thread around an empty bobbin several times. 3. Place bobbin onto bobbin winder shaft with thread coming from rear of bobbin. Push bobbin winder latch against bobbin until it clicks. 4. Release clutch by turning clutch knob toward you. Start machine.
Posted on Aug 09, 2007
all machines thread the same. TTN tension,take up, needle.
Beginning with the spool, guide the thread through the thread guides to the tension assembly. Pull the thread through the tension assembly and test it to make sure the tension is working correctly.
(To do this test,adjust your tension setting to normal or medium or 5 or something in the middle. Raise the presser foot and pull the thread through the tension. It should pull easily!! Lower the presser foot and pull the thread. It should pull noticeably harder.) If it passes this test, continue up through the take up lever,then down through the thread guides to the needle. Make sure your needle is fully inserted and turned the correct way.( If you load your bobbin case from the left side,the needle rule is normally FLAT to the RIGHT is RIGHT. There are some exceptions. If you have a newer style drop in bobbin or your bobbin case loads in the front then the rule is FLAT to the BACK.
To wind the bobbin, guide the thread around the thread guide on
the left top of your machine, then to the bobbin winder. Wind the thread around the bobbin several times, place the bobbin on top of the bobbin winder, push it against the wheel and press the foot pedal. It should stop winding when the bobbin is full or you take your foot off the control
Posted on Jun 05, 2008
I think #39 on this link is the presser foot lever.
#13 on this link is the instruction manual.
If you're looking for the foot control, that is #16 on the first link.
Posted on Jan 24, 2009
There's a website called managemyhome.com which is sponsored by Sears. It's free to join. Go to the Home Manager column and choose Owner's Manuals from the drop down menu.
You can type in the brand name (Kenmore) and model number of your machine. Not all of them are in there but, I did find the one for the 1950280 question. It's a pdf file.
For the 38516764 question, please double check your model number. I received either no response or a Kenmore Elite dishwasher manual in response to my query.
Posted on Feb 04, 2009
Tips for a great answer:
Jul 23, 2018 | Kenmore Sewing Machines
Jul 16, 2017 | Kenmore Sewing Machines
Jun 22, 2017 | Kenmore Sewing Machines
Feb 14, 2017 | Singer Sewing Machines
Jun 01, 2015 | Sewing Machines
Sep 24, 2014 | Kenmore Sewing Machines
Sep 03, 2010 | Kenmore 19365 Computerized Sewing Machine
Apr 17, 2009 | Kenmore Sewing Machines
Jan 18, 2009 | Sewing Machines
Aug 15, 2008 | Sewing Machines
454 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: