Question about Kyocera FS-1135MFP w/ Document Feeder

Open Question

How do i remove a paper jam from my kyoceraecosys fs 1135 mfp printer

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
acdr
  • 1913 Answers

SOURCE: kyocera laser printer FS-1030D, keeps

check in back side of printer and laos down the cartridge.
pull the cartridge and check gain there is may be paper jam.
also try to rese toner cartridge.

Posted on Oct 21, 2008

Ad
leroyal
  • 2120 Answers

SOURCE: paper jam

Did you try the door in the back of the printer?

Pull the paper cassette out then pull on the green handle to pull out the feed unit.

Posted on Jan 02, 2009

  • 241 Answers

SOURCE: Kyocera FS - 3900DN creases the paper

If even a very small piece of paper is in the paper path it could cause this issue. You may need to have a technician take the printer apart to see what the cause is. If you can indicate exactly where inside it may be causing the paper to crease it would indicate whether one of the rollers is causing the issue or not, you may have a roller that is needing to be replaced. If you haven't had your printer looked at by a technician in a while it may be time to get a maintenance cleaning done which would resolve your issue and also indicate if there is any major problems going on with your printer.

Posted on May 28, 2010

  • 62 Answers

SOURCE: Kyocera FS 4000 DN printer stops printing for no reason.

Try the feed tires in the tray first. More than likely the paper is not being picked up and causing jam message. The separation roller also has a hub on it to prevent a second sheet from feeding. Sometimes these start to lock up ,a little oil on the hub sometimes relieves some of the tension.

Posted on Jul 07, 2010

  • 167 Answers

SOURCE: my kyocera FS-C5015N printer is

Reclean the cyan corona wire/grid with the cleaning block that comes with each toner.ensure that you leave the corona unit as far out of the machine as possible for 30 seconds to allow the grid to dry.If this does not work then you will need a technician to attend to the printer.

Posted on Aug 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you use a Kyocera FK-170U fuser unit in place of a FK-150 fuser unit?


No the FK-170U fuser will not work in a printer that is compatible with the FK-150 fuser unit. I found a Kyocera FK-150 Fuser Unit available on Amazon here: https://www.amazon.com/Genuine-Kyocera-FK-150-302H493032-Kyocera/dp/B00GOO57M2 . Other sites have third-party replacements.

The FK-150 fuser is the correct fuser for the FS-1028MFP, FS-1128MFP, FS1350DN, among others. The FK-170U fits the following Kyocera printers: FS-1035 Mfp, FS-1135 Mfp, FS-1370DN and FS-1120D. There are a few other printers. The design changes means they can't be substituted.

I hope this helps.

Cindy Wells

Aug 01, 2018 | Kyocera Office Equipment & Supplies

1 Answer

Why i cannot send a fax from my kyocera ecosys fs-1135 mfp?


If you can receive but not send, maybe the number you are sending to should include some pauses, especially at the end of the number. If you have a good dial-tone when you do "On-Hook" then there is nothing preventing you from sending on the machine end. Has the phone system just gone digital? You may need a filter to translate pulses properly. Can you call your cell-phone using On-Hook dialing? I would say there's nothing wrong with the machine. But you'll get blamed for the communication problem in any case. Try manually dialing using On-Hook dialing (turn your Monitor sound up high) and listen for some kind of message. It's a number or line problem. Did they just start requiring an 8 or 9 to be prefix-dialed to get "out?" Or stop requiring it? Maybe there is a prefix number programmed through the default menus that you don't need anymore.

Sep 06, 2014 | Copystar Kyocera FS-1135 MFP/DP Printer

1 Answer

How to find the fax number for my kyocera fs 1135 mfp


fax your cell phone the number that calls up is the fax number

Jun 15, 2014 | Kyocera FS Office Equipment & Supplies

1 Answer

NOISES DURING COPYING


open rear cover and check the fuser to see if there is wear on the heat roller, if there is a line worn in the roller and it makes a grinding noise,
it will need the fuser replaced, also it may need a firmware update.

Apr 02, 2014 | Copystar Kyocera Fs-1135 Mfp Multifunction...

1 Answer

Frequent paper jamming, occasional false paper jam indication, black shade on the right side of the paper in my 10 months old (counter-64000 prints) Kyocera fs-1024 MFP photocopier. Cleaned the glass,...


Myself able to solve the issue, by replacing the drum yesterday. The drum is damaged due to non-removal of waste toner! Misguidance, improper service from Abhishek Enterprises, Shimoga.

Sep 22, 2013 | Office Equipment & Supplies

1 Answer

Not genuine toner detected on FS 1135 MFP


use a new genuine kyocera toner. refurbs, refills, and reset chips will cause damage after awhile. OEM supplies are expensive but worth it in the long run.

Sep 02, 2013 | Kyocera Office Equipment & Supplies

1 Answer

Copystar Kyocera FS-1135 MFP waste toner full


I can not find the screw razor is talking about.

Mar 05, 2013 | Copystar Kyocera FS-1135 MFP/DP...

1 Answer

I have a m3027 mfp hp printer top feed won't grab


turn the power off.remove ink cartridge then check there is not any paper jam.aslo check in back side of printer for paper jam .also clean your ink cartridge try other ink cartridge.

Jan 05, 2009 | HP LaserJet M3027 MFP Printer

Not finding what you are looking for?
Kyocera FS-1135MFP w/ Document Feeder Logo

Related Topics:

1,022 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

gggg

Level 3 Expert

904 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...