Question about Watches

1 Answer

Cannot advance date manually when crown is in 1st position on eco citizen ladies watch

When try to change date/day when put crown in first position, it will not allow me to advance it manually when I turn clockwise or counterclockwise - like it is stuck. The date/day changes with time, But I cannot change manually. I hope you can help. I purchased 10/05/2012, and it was working when I first got the watch. It is not now. I set it by instructions, and the date/day did not advance correctly. So, I ended op having to changing by turning time several times to get date/day correct - could not do in 1st position - had to do in 2nd position. Will I be able to do date/day in 1st position manually again (what caused this). Please help. thank you

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 302 Answers

Return for warranty repair. They have a 5 year warranty. Your instruction book has details and address to send it in. Send a copy of your receipt also.

Posted on Oct 08, 2012

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
escapement

Arturs Kalnins

  • 2338 Answers

SOURCE: Need instructions for setting a citizen eco-drive watch

try this link:

http://www.citizenwatch.com/COA/English/settings.asp

Rate, please.

Posted on Mar 29, 2009

mcdevito75

Michael C. De Vito

  • 1970 Answers

SOURCE: Citizen eco-drive BM8084-58H: I cannot change the

mcdevito75 here, The crown should be a 2 position crown, try this, pull out the crown as if to set the hands, rotate the hands, (adjust the time) around the dial until you have the right day, Now! push the crown in, Now! slip your finger nail just under the crown and lift the crown to it"s first notch or position, this should allow you to turn the crown and adjust the date, when at the date push the crown back in and your done.

Posted on Jun 28, 2010

watchmacher

Michael

  • 302 Answers

SOURCE: I was trying to set

Hi, I don't believe you have actually got it back on(the crown) properly. You will have to take it to a watchmaker to be done correctly. I think your setting problems will go away once the crown is attached to the stem correctly, Michael

Posted on Mar 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The stem on my citizen watch is turning but not changing the time or date any ideas what is wrong ?


put your finger nail under the crown and pull it out a bit ,then turn it to adjust the hands . when finished push it back in

Apr 15, 2015 | Citizen Watches Citizen Eco-Drive...

1 Answer

How do I manually set my Eco-drive wr200


Pull crown out 1 click to set day/date, set to one day behind actual date... Then, pull crown out an additional click to move hour/minute hands around to set exact date by hour/minute a complete 12-24 hour revolution if necessary to get AM or PM accurate for the proper day/date. :)

Jul 05, 2014 | Citizen BL5314 52E WR200 Eco-Drive scyba...

2 Answers

SETTING DATE JUST ROLEX


After you unscrew the crown it is already in winding position. If you pull the crown, it will go to the date setting position. Further pull of crown will set it in time setting position. Try to pull the crown till you get it in correct date setting position and change the desired date. Do not use the date setting between 10pm - 2am, as this can damage date mechanism. The best way is to pull out crown to the time setting position and set the time to 6.30(anytime) and then push the crown in to date setting position and change the date to the previous day's date. Then again pull the crown out to the time setting position and advance hands forwards (clock wise) till hands pass 12.00 (midnight) and the date changes automatically to the desired one, then adjust the time, push the crown fully in and screw the crown on.

Jun 01, 2011 | Rolex Lady Datejust 179173SRJ Watch for...

1 Answer

Will/could you advise me on how to reset the time on my Citizen Eco drive wr100 watch that I purchased last year. Can't find my manual. Thank yo so much.... Happy Holidays!!!


1. Pull the crown out to position 2, two clicks.
2. Press and release the lower right button.
3. Rotate the crown to adjust the minute.
4. Press and release the lower right button.
5. Rotate the crown to adjust the hour.
6. Press and release the lower right button.
7. Rotate the crown to adjust the date.
8. Press and release the lower right button.
9. Rotate the crown to adjust the current month and leap year.
10. Push the crown to position 0.

Dec 23, 2010 | Citizen Eco-Drive 180 WR100 World Timer...

1 Answer

Citizen eco-drive BM8084-58H: I cannot change the date/day on the watch moving the crown.


mcdevito75 here, The crown should be a 2 position crown, try this, pull out the crown as if to set the hands, rotate the hands, (adjust the time) around the dial until you have the right day, Now! push the crown in, Now! slip your finger nail just under the crown and lift the crown to it"s first notch or position, this should allow you to turn the crown and adjust the date, when at the date push the crown back in and your done.

Jun 28, 2010 | Citizen Corso Eco-Drive BM8084-58H Wrist...

2 Answers

I cannot set the date on my Citizen SkyHawk Eco-Drive


Just pull the crown out, turn it so that the bottom analog display is set on "CAL" and push crown back in. Voila!!

Mar 16, 2009 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

Watch


You should be able to pull the crown out 1/2 way and turn the crown clock-wise and you should hear a click and the calender should move one day. Don't change when the hands when the time is between 10 and 2 , just manually move the hands past that time , and re-set afterwards. If that dosn't work let me know ,.There are other types of those watches , but the way I told you is the most common.

Jul 07, 2008 | Citizen Eco Drive Perpetual Calendar Watch...

Not finding what you are looking for?
Watches Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

The Knight
The Knight

Level 3 Expert

76143 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...