Question about Tag Heuer Carrera Auto CV2113.FC6180 Wrist Watch

1 Answer

Chronograph hand does not reset to 0 (12 o'clock)

Hi, I have recently purchased this watch (Tag Heuer Carrera CV2113-0), and noticed that the chronograph hand does not reset to exactly 12 'clock, it seems to be less than 1/100 off. I have tried pulling the crown out to the 2nd position and pressing the buttons to adjust,but even if I manage to get it in the correct position (and it is not easy...), next time i use the chronometer and reset it, it still goes to the off-2'oclock position.

Any ideas? Thanks.

Posted by on

  • TagCarrera Feb 22, 2009

    I have the same problem.. Chrono does not reset to Zero (12 o'clock) it's more like 12:02. Anybody know how to reset it to zero? I've played w/ the crow and push the buttons no luck..

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Fake

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tag heuer stopwatch


Pull out the middle dialer once then try if that's doesn't work pull it again one will be the chronograph the other will be the stopwatch and if you turn the middle dialer it will change your clock

Apr 27, 2013 | Watches

1 Answer

My tag heuer carrera stop watch doesnt reset properly, when u reset the stopwatch it goes one minute behind and doesnt reset to zero. how do i fix this. it never resets to zero and the red hands on the sub...


Try this.

Pull the winder out fully. Then press the top right chronograph button to move the centre seconds hand on. Then push the winder back in.

on some models you should only pull the winder half way out.

good luck

Sep 23, 2010 | Tag Heuer Carrera Tachymetre CV2013.FC6206...

1 Answer

The stem broke off of carrera watch. How much should repair for this problem be?


mcdevito75 here, A new stem and crown Approx. for your Tag Heuer, $125.00 that"s if the stem is broken, if the stem just pulled out it may be able to be saved. Check here at fixya, bottom of page, click on repair service directory the watches.

Jul 03, 2010 | Tag Heuer Automatic Chronograph Series...

2 Answers

Heuer chronograph second hands will not reset to 12 after I reset chronograph . It's a quartz watch with mechanical chronograph movement. Any one know how to do this, I know there's a way but I don't know...


Pull out crown and then push the upper button and hold it. The chrono hand should start move and you should be able to adjust it. If this doesn't work, try the same with lower button. When adjusted - push the crown back in. In fact there are very many variations how to reset chrono hand, but exact advise can be given if the movement caliber of particular watch is known.
Rate me, plz.

Jan 28, 2010 | Tag Heuer Watches

1 Answer

Hi there i have bought a second hand tag heuer carrera tachymeter,i dont have a user manual,but cant seem to get the chronograph functions to work ?


Great watch! Operation should be pretty straight forward. The top button starts the chrono and stops it. The bottom button resets it. To calibrate the sweep arm into the right position pull the crown out to the first or second set position and press the start button until the sweep arm is in the start position you desire. This is typically 12:00 or 0.
If your chrono is not working then have the battery checked. If the battery has been recently replaced then make sure the watch doesn't need to be cleared.
I recommend you take this to a watch maker/technician who will be familiar with the service requirements of this model including resealing and pressure testing the watch to be sure it is sealed to its marked water resistance specifications.

Thanks!

Sep 20, 2009 | Tag Heuer Carrera Series Chronograph Watch

2 Answers

Tag heuer automatic series, how do you start the watch after purchasing?


push the crown in if it is in the adjust position .then shake the watch around the auto mechanism sould start the watch

Aug 23, 2009 | Tag Heuer Automatic Chronograph Series...

Not finding what you are looking for?

Open Questions:

See all Tag Heuer Carrera Auto CV2113.FC6180 Wrist Watch Questions

Tag Heuer Carrera Auto CV2113.FC6180 Wrist Watch Logo

2,489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tag Heuer Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Are you a Tag Heuer Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...