Question about Brother DCP-9055CDN laser toner
Posted by Anonymous on
1. Open front cover
2. Press the button "Storno"
3. Select which toner you want to reset.
K. : black
M. : magenta
C. : cyan
Y. : yellow
STD: standard toner
HC: high capacitity toner
If you don't know which toner you have, you can reset all.
--> change toner when colour on printed page is pale. (putting in a new toner will reset automatically)
Posted on Mar 28, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Your print head is stuffed. More expensive than new machine, Release your frustration with this unit by placing neatly in bin!
The head drive voltage has
dropped from the high to
low level in an abnormally
defective (Cracks or
Posted on Feb 07, 2008
unplug plug it back in, did you remove the protective cover and clean coria wire?
Posted on Dec 20, 2007
nvr mind, i guess the toner is exhausting or is exhausted..
mind for a refill or head change or both..it may solve ur problem..!!
do contact ur system admin!!
Posted on Oct 25, 2009
I just had this problem and fixed it. The original toner cartridge that comes with the printer cannot be reset. You have to buy at least one new cartridge. The reason is that the original cartridge that comes with the printer doesn't have a reset flag. You can, however, refill/reset a cartridge that you buy separately. Pull out the drum and lift the cartridge out of the drum. Hold the handle and look on the left end. You should see a crescent shaped hole with a white flag/lever. To reset this, move the white flag all the way to the left (I had to use something to push it). Put it back into the printer and voila - it fixes itself. Then, after the printer has been reset, you can use the original cartridge again, if you want. The flag part won't matter once the printer has been reset. I hope this is clear. I know it worked for me, and I had the exact same problem.
Posted on Sep 21, 2010
Tips for a great answer:
Nov 18, 2013 | Brother DCP-7020 All-In-One Laser Printer
Apr 19, 2013 | Brother DCP-9055CDN laser toner
Apr 09, 2012 | Brother DCP-7020 All-In-One Laser Printer
Mar 09, 2012 | Office Equipment & Supplies
Jan 19, 2011 | Brother DCP-8040 Copier
May 14, 2010 | Brother DCP-7025 All-In-One Laser Printer
Jan 13, 2010 | Brother DCP-7040 Laser Printer
Nov 04, 2009 | Brother DCP-7020 All-In-One Laser Printer
Jul 10, 2007 | Brother DCP 7010 Multifunction Laser...
2,042 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: