Question about Sharp Office Equipment & Supplies
Ok H5 is usually associated with 5 jams in a row but is 01. The 02 not sure about. Try going into simulation, U press # * c * on the key pad.
sim 14 should show, now hit copy key are you sure should appear, and then hit copy key again. The machine will restart.
Let me know if it comes back after this.
Posted on Jan 21, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Press P-interrupt-C-interrupt and enter test command 14 and Execute to clear your error. Let your machine reboot. If it comes back you have a problem with your fuser. Most likely it's dirt or toner caked on your tempature sensors and they need to be scraped off.
Posted on Jun 15, 2008
Unplug the Machine, remove the board you installed, re-seat the board,
make sure everything is connected, turn machine back on..
This is what the Manual says:
IMC PWB communication trouble (Timeout)
Check the connectors of the IMC PWB
and MCU PWB.
Check the grounding of the copier.
If you need further help let me know..
Posted on Oct 26, 2008
Tips for a great answer:
Mar 11, 2013 | Sharp AR-BC260 Color Copier
Dec 08, 2010 | Sharp AR-5316 Advanced Digital Imager...
Jun 01, 2010 | Sharp AR-5316 Advanced Digital Imager...
Feb 12, 2010 | Office Equipment & Supplies
Oct 17, 2009 | Sharp AR-5316 Advanced Digital Imager...
Apr 01, 2009 | Sharp AR-5316 Advanced Digital Imager...
47 people viewed this question
Usually answered in minutes!