Question about Samsung DMR57LFS Stainless Steel Builtin Dishwasher

2 Answers

Samsung dishwasher no power/display off

Ran dishwasher and a few hours later display was off, would not start. replaced fuse, still nothing.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The Samsung DMR57LFS Dishwasher has a 15 Amp/250VP Volt Fuse located on the lower right side of dishwasher behind an aluminum panel held by two screws. Pull dishwasher out from counter, remove lower rectangular aluminum panel, and it is just inside underneath. Unscrew fuse holder and replace fuse. I had to pay a Samsung Authorized Repairman $109.70 to replace a simple fuse. I learned the hard & expensive way. Samsung won't tell you to check the fuse underneath the unit. They won't even tell you that there is a fuse underneath on the right side. The fuse protects the Printed Circuit Board or Blue LED Control Panel in the event of a power surge or lightning strike.The less than $4.00 fuse will blow first.

Posted on Aug 05, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 249 Answers

Call chas&son,s at 579-379-0993 and they will come out the same day no less okay

Posted on Feb 13, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung lcd tv la22a450c1 in standby mode all the time, no display.


Faulty capacitors in the power supply is most likely but it may have damaged the other boards whilst it was failing.

Jan 06, 2018 | Samsung Dishwashers

1 Answer

Kenwood KDW8ST2A - Power on, do not start.


Hi, try to reset the dishwasher power fuse. Check your dishwasher manual to do this.

Feb 02, 2014 | Kenwood KDW8ST2A Dishwasher

1 Answer

Frigidaire FDB126RBS2


Be very careful, it sounds like an electrical failure, were the machine has cut out to protect you and itself. You need an expert there and quickly. Water and electric are a bad mix and more house fires are caused by washers than most other appliances.

Sep 23, 2012 | Dishwashers

1 Answer

Frigidaire dishwasher had blinking lights then nothing


there is no fuse in the unit but u can unplug and plug into power 2 c if resets.

Aug 18, 2009 | Dishwashers

1 Answer

1991 Camry, ran battery down, won't start with jump.


Check all fuses under dash and hood. Install a good battery or jump it. Have someone try to crank it while you check for voltage to the starter solenoid. Make sure all battery connection including ground to body are clean and tight. If good, make sure there is 12volts at the stater. If good, it sounds like a new sarter. Please let me know. Is this standard or automatic?

Jun 08, 2009 | 1991 Toyota Camry

1 Answer

Ran dishwasher, we to work, came home, no power, water in bottom. Breaker is not tripped, power to rest of kitchen


Although breaker has not tripped it is still worth changing the fuse in the dishwasher plug.
Nothing to lose for a few pennies.

Feb 18, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Sparadic power interruptions


try checking the cpu fan and heatsink for dust build up

Dec 31, 2008 | Gigabyte GA-8ST800 Motherboard

1 Answer

Works then no power Kenmore 16352


first thought would be a loose connection in the junction box under the dishwasher.

Nov 27, 2008 | Kenmore 24 in. 16352 / 16354 / 16359...

1 Answer

I have no power on my dishwasher. I ran an extension cord to another outlet that I know has power and still nothing. I don have any led lights or anything. Can you help. GE model # GHDA960K03BB. Thank...


Few components may cause power failure to your Dishwasher.
1. Disconnect your power plug from the socket outlet.
2. Trace the cord to where it connected to your dishwasher.
3. Tight those connectors firmly .
4. Plug back your dishwasher power cord .Start your dishwasher.
If nothing happen, check if control board came with fuse or bimetal. check the continuity of the fuse., You may also check your latch assembly.If no power still change the console or the control board.

Jul 26, 2008 | GE Dishwashers

1 Answer

No lights on panel and will not start


Pull panel off and check thermal fuse for continuity,probably bad.

Jun 07, 2007 | KitchenAid KUDS24SE Built-in Dishwasher

Not finding what you are looking for?
Samsung DMR57LFS Stainless Steel Builtin Dishwasher Logo

Related Topics:

815 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Dishwashers Experts

vince

Level 3 Expert

1234 Answers

gbob59

Level 3 Expert

3042 Answers

Cindy Wells

Level 3 Expert

5968 Answers

Are you a Samsung Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...