Question about Motorola Mint Radius Cp200 Uhf 4ch Radio
The battery is no longer taking a charge properly and needs to be replaced.
Posted on May 04, 2014
Right on RANDY!
New battery shipped from California ~ under $20 on eBay... Bring your Frankenstein back to life!
1500mAh Battery For Motorola CP200 CP200D CP200XLS PR400 Portable Radius...
Posted on Dec 02, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Your programmable buttons can be programmed to a number of options. Typically the first button is programmed to monitor and sticky monitor. If this button has been held in a long press you can clear the setting by holding it in another long press to shut it off, or by simply shutting the radio off and turning it back on.
Your second programmable button could be set for an number of features, but like the above description, simply pressing it again or shutting off the radio will turn the feature off.
When you refer to Monitor Mode, we assume your are indicating the radio is operating open squelch, with no private line code. This is when you can hear ALL transmissions on your frequency. If this does not describe the problem you are having please repost another question.
Posted on Jul 16, 2009
SOURCE: problem charging
If you are referring to a flashing yellow light on the charging base, this is an error code. Either the 1) battery is bad, 2) not making good contact in the charger, or 3) very very low on charge. The solution for this set of problems is as follows: 1) have the company you purchased them from replace them, 2) clean your contacts with a pencil eraser, 3) leave the battery on the charger with the yellow light flashing for an hour or two. If the battery is just very low on a charge, it will come back to life and the light will change to be constant. If the battery is bad or shorted out, the light will continue to flash and you will need to get with the vendor you purchased the batteries from.
Other things which come to mind are compatibility issues such as you are using a different battery chemistry than you had before. NiCd batteries can charge on either of the two chargers available for the P110 (slow rate or fast rate). However, NiMH and Li-Ion batteries require a fast rate charger.
If you are referring to a yellow blinking light on the radio while it is in the charger. You need to shut your radio off. Radios should always be turned off when charging. If the radio is left on you will never have a full charge. Also, if you inadvertently press the PTT while the radio is turned on, while on a charger, you can cause damage to the radio.
FYI: There is no light to show "out of range" on the radio, unless you are possibly using a trunking or repeater system. A blinking light on your radio indicates the radio is turned on and/or there is traffic on your frequency. Your charger base light can be red, yellow or green. This indicates the charge cycle status. Flashing most always means some type of error.
Posted on May 20, 2009
Tips for a great answer:
May 01, 2017 | Motorola Radio Communications
Mar 17, 2017 | Motorola Radio Communications
Apr 30, 2014 | Motorola Mint Radius Cp200 Uhf 4ch Radio
Aug 21, 2013 | Motorola CP200 Two Way Radio
Jul 25, 2013 | Radio Communications
Jul 08, 2013 | Radio Communications
Nov 09, 2012 | Motorola Mint Radius Cp200 Uhf 4ch Radio
Sep 20, 2012 | Motorola CP200 Two Way Radio
Dec 18, 2011 | Radio Communications
6,922 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: