Question about GE JRP24 Electric Double Oven

1 Answer

Jrp24bod1bb GE Double Oven

I want to replace my GE Double Oven, but the measurements on this oven seem smaller than what i'm finding on the internet. I was told I would need a cabinet size of at least 28" width, but my current cabinet (with the jrp24 installed) is only 25" wide. Can anybody confirm the actual size of the JRP24? And is this size not standard? thanks! Dennis

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • GE Master
  • 1,922 Answers

You would need a minimum of 48&1/8" high,23&1/2" Deep, and 22&1/2" wide and 14" off the floor for ventilation per G.E quick specs

Posted on Feb 25, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
aborcass
  • 2651 Answers

SOURCE: Replacing a 30 inch wall oven -

a number of solutions for your problem a little smaller better then a little larger, iv seen depending on surrounding cabinetry, either wood fill strips, lexan(plastic) strip added as a filler. depending on what the installation guide recommends for opening , that is all that would be required what you fill if with will be a purely asthetic choice

Posted on Nov 13, 2008

Krazytech
  • 725 Answers

SOURCE: I actually have a very

WB44X0200 BAKE UNIT 208/240V

this bake element should work I would take your old one with you and compare the way it mounts to the connections..

Posted on Aug 16, 2008

  • 750 Answers

SOURCE: replacement for built in oven/microwave

Hello tippett_631

Welcome to fixya,

You said, ,
22 years ago you built the house you are currently living in. The above oven/microwave oven was built in. You are interested in replacing this unit with a new unit but it must be the same size. ? by the way i You would be happy with a double oven versus the microwave/oven duo. You have measured across the front of the unit and it only measures 26" across. Any assistance you could give us would be greatly appreciated.

I can help you!
The front is 26 inches.
And how high is it from the top to bottom?
Also when I sell a wall oven I always send out the installer to check the hole or cutout size.
Most of the time no wall oven fits with out at least one cut!
Do you have any room to cut a little on all sides?
What is your model number now. And what color do you want now??
I will send you some GE wall oven models and sizes so you can check your self if it will fit. usually they have to cut at least one side to fit it in the old hole!

Posted on Sep 25, 2008

jyackle5
  • 8197 Answers

SOURCE: installing ge profile double oven

You must use a three-wire, single-phase A.C.
208Y/120 Volt or 240/120 Volt, 60 hertz
electrical system. If you connect to aluminum
wiring, properly installed connectors approved
for use with aluminum wiring must be used.

That means that you ned a double 40 amp breaker.

Good Luck

Posted on Jan 18, 2009

  • 6032 Answers

SOURCE: how to install GE JKP35DPBB 27" Double Electric

The specs for this double oven give a rating of 5.1kW at 208V so it needs a 30 Amp circuit breaker. This assumes that the oven is the only appliance on the circuit. So you should be able to use the same circuit breaker.

A bigger consideration is that the opening for the double oven needs to be larger than that of the single oven. If the opening does not have a solid bottom, it must be able to support a heavier load. The runners and braces under a single oven has to support 200 pounds (91 kg). A double oven must have braces and runners designed to hold 375 pounds (171 kg).

Also check if your household uses aluminum wiring. The new oven has copper and problems will occur at the interface if you do not use the appropriate precautions. (Products designed for mating copper and aluminum are available - follow the directions).

I hope this helps.

Cindy Wells
(btw: you can find the User's Guide and Installation manual for the double oven at GE's website: http://products.geappliances.com/ApplProducts/Dispatcher?REQUEST=SpecPage&Sku=JKP35DPBB . See the section Literature and Manuals on the left hand side of the page below the picture of the oven.)

Posted on Oct 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have GE model#JKP45WOP2WG double oven wall unit. Lower oven isn't heating up properly. Bottom of lower oven doesn't seem as hot as the top of the oven... replaced oven sensor, not


Most double wall ovens are technically two separate oven boxes. The lower oven box has its bake, boil elements, high limit thermostat and ofcourse its own oven sensor. If the lower oven box boil is working good and less heat on bake feature may suggest that the bake element is burned out and only getting preheated with boil element. Just a suggestion here

Dec 05, 2014 | GE Ovens

1 Answer

What size microwave oven do I need to replace a GE jkp85?


You may have to do all the work to find one! After you take complete measurements (length, width and height) you will need to go to the appliance store with many choices to match it up!

Jan 12, 2013 | GE JKP85 Electric Double Oven

1 Answer

What size breaker and wire for this oven


Hello Sbilko,

I understand that you are tring to find a breaker and wire size for your GE JKP28 Double Oven. As I look up the specs on your oven I find that both ovens are rated at 30 amps. This requires you to use two thirty amp breakers one for each oven. The industry standard for Oklahoma requires that you use at least #10/2 wire for a 30 amp breaker. However, in some places it states that you can use #12/2 although I would not recommend using #12 gauge wire.

My suggestion to you is two 30 amp breakers and #10/2 gauge wire, this should be what will take care of the circuits and keep the wire form heating up.

Thank you for choosing FixYa.com

Justin

Mar 29, 2011 | GE JKP28 Electric Double Oven

1 Answer

How to install GE JKP35DPBB 27" Double Electric


The specs for this double oven give a rating of 5.1kW at 208V so it needs a 30 Amp circuit breaker. This assumes that the oven is the only appliance on the circuit. So you should be able to use the same circuit breaker.

A bigger consideration is that the opening for the double oven needs to be larger than that of the single oven. If the opening does not have a solid bottom, it must be able to support a heavier load. The runners and braces under a single oven has to support 200 pounds (91 kg). A double oven must have braces and runners designed to hold 375 pounds (171 kg).

Also check if your household uses aluminum wiring. The new oven has copper and problems will occur at the interface if you do not use the appropriate precautions. (Products designed for mating copper and aluminum are available - follow the directions).

I hope this helps.

Cindy Wells
(btw: you can find the User's Guide and Installation manual for the double oven at GE's website: http://products.geappliances.com/ApplProducts/Dispatcher?REQUEST=SpecPage&Sku=JKP35DPBB . See the section Literature and Manuals on the left hand side of the page below the picture of the oven.)

Oct 29, 2010 | GE 27" Built-In Double Electric Convection...

1 Answer

I have a jrp24bod1bb but that model number doesn't seem to exist on the internet how do I find a replacement control panel


Hello- The oven control (computer/clock) is available thru applianceparts.com and repairclinic.com for about 120$. The control panel is about 250$. Make sure on-site diagnostics confirm which one before replacing. Let me know if this info helps- have more if needed.  Thanks-  Ed

Mar 17, 2010 | GE JRP24 Electric Double Oven

1 Answer

Older GE oven self clean mode beeping with F2???


HI, this will happen when the oven Control senses oven temperatures above 915F-930F

If actual over temperature condition occurred: Look for welded relay contacts. If this happens, replace oven control (also called clock or ERC).

If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective. Check door lock switches.

Remember: Oven control (ERC) measures resistance of sensor circuit , not actual oven temperature.

Jul 24, 2009 | GE Profile JTP56 Electric Double Oven

1 Answer

Bottem Oven Over Heats


GE announced a recall for some of its wall ovens this week for an overheating problem. Have you contacted a GE dealer yet?

Nov 20, 2008 | GE JRP24 Electric Double Oven

1 Answer

Replacement for built in oven/microwave


Hello tippett_631

Welcome to fixya,

You said, ,
22 years ago you built the house you are currently living in. The above oven/microwave oven was built in. You are interested in replacing this unit with a new unit but it must be the same size. ? by the way i You would be happy with a double oven versus the microwave/oven duo. You have measured across the front of the unit and it only measures 26" across. Any assistance you could give us would be greatly appreciated.

I can help you!
The front is 26 inches.
And how high is it from the top to bottom?
Also when I sell a wall oven I always send out the installer to check the hole or cutout size.
Most of the time no wall oven fits with out at least one cut!
Do you have any room to cut a little on all sides?
What is your model number now. And what color do you want now??
I will send you some GE wall oven models and sizes so you can check your self if it will fit. usually they have to cut at least one side to fit it in the old hole!

Sep 25, 2008 | GE Ovens

Not finding what you are looking for?

Open Questions:

See all GE JRP24 Electric Double Oven Questions

GE JRP24 Electric Double Oven Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9174 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...