Question about GE 24 in. GSD2000Z Built-in Dishwasher
I have a GE Potscrubber dishwasher that I rarely use, but when I tried to use it recently, it just hummed but nothing else happened. When I tried to manually move the dial, water started to come in just past the Rinse and Hold setting but it would not pump the water out.
I have a portable that had the same problem. I called a repairman and he turned a fan blade on the motor. Mine is located on the right side about 12" in. It gets hung up when it is run often enough. If your problem is the same is mine all you have to do is turn the blade and it works like a charm. Hope this helps.
Posted on Feb 28, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
With nothing displaying and only the humming sound, it appears that the main controller card (PCB) has most likely failed.
If it were my dishwasher, I would add a pitcher of water (more than two big glasses full), close the door and start a cycle and listen at the drain. The first thing a dishwasher does is run the pump to empty any standing water before it fills up. If you hear that water drain, (and can see that is has drained from inside the dishwasher) it is not as broken as I think it is.
BUT, this dishwasher should be displaying something from the moment you press the power button.
Please post back with what you find and decide you do. OK?
Posted on Apr 18, 2009
A humming sound can be a failing wash motor (that drives the water pump) or it can be as simple as a blockage in the the pump area beneath the lower spray arm, under the filter.
Remove the spray arm and the filter top (screws will need to be removed)
Use a flashlight and inspect all over the sump area for debris that is blocking/jamming the impeller area. Reasemble and test with a short cycle.
If the dishwasher continues to make the same humming, it is time to replace the wash pump.
Good Luck! Post back here if you would like more guidance.
Posted on Apr 11, 2009
SOURCE: GE POTSCRUBBER 1200 DISHWASHER
Hi. My GE Potscrubber 1200, Model GSD120055, stops mid-cycle and does not drain the water. It stops on Rinse and Hold.
I can nudge the dial and the dishwasher completes its cycle, so the drain and pump are okay. Is the problem with the timer or something else ? Please help, O Wizards of Washing.
Posted on Mar 27, 2010
Tips for a great answer:
Aug 02, 2018 | GE Dishwashers
Aug 10, 2013 | Dishwashers
May 20, 2013 | Dishwashers
Aug 14, 2010 | Dishwashers
Aug 07, 2010 | GE Dishwashers
May 13, 2010 | Dishwashers
Feb 21, 2010 | GE Dishwashers
Dec 07, 2009 | Dishwashers
Aug 01, 2009 | GE Dishwashers
Jan 30, 2018 | GE Dishwashers
Sep 11, 2017 | GE 24 in. GSD2000Z Built-in Dishwasher
2,985 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: