Question about Reliable i30/120V Professional Steam Iron Head Only, Aluminum Soleplate, 32 Steam Chambers, 7 Foot Cord, Hose for i500, i700 Boilers ITALY

1 Answer

Wet steam coming out of iron

Thisiron is part of the I300 boiler and steam system. All of the components in the boiler portion have been replaced and it cycles on and off as designed. However, I am getting very wet steam out of the iron. I've tried the troubleshooting steps in the manual multiple times but still very wet steam. I note that there is a "thermostat 271 w/ manual reset" in the parts list for the iron but have been unable to find this reset button. If it is tripped I would assume the iron heating element will not heat and the steam is condensing to quickly in the iron and thus the wet steam.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

You have to take part the iron by unscrewing the three bolts on the side handle with a small phillips driver. Then loose the allen screw on one side of the black thermostat wheel to unloosen it. Then take out the two bolt plastic protectors under the handle and unscrew the two allen bolts, carefully separate the top from the botton of the iron, carefully not to pry loose the cables from the top to the hot shoe.
On the back you will see a small white square box, that is the thermostat, which has a button on top, all you need to do is to push it in. This will make the iron heat up unless you have a thermostat failure (Black wheel with temperature indicators), which you will need to order the part and change it.

Posted on May 28, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Rowenta dg5030 is not producing steam. The iron plate gets hot and the boiler is hot. Just when you depress the steam button, nothing comes out. There is steam in the boiler. Thank you


The small transfer water-line to the steamer section has closed up. This is due to contamination of salts, accumulated calcium or other debris. Its baked on and not easy to remove. All I can tell you is: always use filtered water or distilled water in the NEW IRON that will replace this one.

Feb 11, 2018 | Rowenta Irons

1 Answer

My Rowenta pro precision iron steam station gets hot but doesn't steam. How do I get the iron to produce steam?


There are two cause. One the boiler resistance doesn´t turn of because of snap disc or bimetal thermostat fault or because a coil in the working valve (security valve). But if you can heard a click of opening movement of valve when you push the button it is able to be a thermostat.

Apr 12, 2016 | Rowenta Irons

1 Answer

The iron has been all descaled, however we cannot get any steam when pressing the button. It is a Tefal express generator model 3 years old.


Once you have descaled the boiler and refilled your frontpiece of the iron itself (hopefully with distilled water - any supermarket) you press the "reset"/ "restart" button on the back end of the steam generating unit. When the water is hot enough press steam button & turbo button a few times - WARNING: make sure iron is facing downwards and cover ironing board with old rag because initially brown steam splatter will come out on first few steam releases.

Feb 14, 2015 | Tefal Irons

1 Answer

No steam coming throwc


Normally when water is put inside steam irons, it get stored in tank then if thermostat knob is set for steam then water moves to bottom heated portion of iron. Water converts to steam as base plate is hot, heated steam comes out through perforated holes. If holes are blocked due to scale formation steam flow is blocked. The descaling has to be done as per instructions given on descaling wax manufacturer. sometimes if water does not enter through a rubber washer that is water tank to heated bottom portion then also steam will not get generated hence no steam. Please check above points and identify the problem.

Jan 08, 2015 | Irons

1 Answer

Ssteams constantly without pressing steam trigger


Sounds like your trigger valve in the iron portion (not the tank) is jammed open. It could be from mineral deposits so maybe try running it with a solution of distilled water and a couple of tablespoons of vinegar in the tank. Wiggle the steam trigger to try to release any scaling that maybe present inside the valve. If your steaming from the iron stops, you've fixed the problem so let the iron cool and rinse the tank using ONLY DISTILLED WATER which anyone knows is the only type of water to be used in ALL appliances. Minerals in regular tap water kill appliances quickly. Never use tap or bottled drinking water even if the directions say it's okay. Iron some old rags or towels with a tank of distilled water to make sure no mineral deposits or staining steam comes out after cleaning.
If this fix doesn't work, you can buy a replacement iron portion online..try 1800Parts.com. It's cheaper than buying a whole new iron but you may need a repairman...I've never tried to fix this portion of my DG5030 iron.

Aug 28, 2013 | Rowenta DG5030 Iron

1 Answer

Steam boiler iron


you can download instr. manual from www. fitness.manualsonline.com or www.retrevo.com or www.manualsfactory.com

service manual go www.pdfservicemanual.com
God bless you. However see the diagram is universal for repair small appliances.

7_26_2012_12_37_09_pm.jpg

Jul 25, 2012 | Irons

1 Answer

Sole plate leaking


This IS a steam iron? The iron must be hot for the steam to form. If it's not hot enough, the water is leaking thru the steam holes. Also if the channels are calsified (boiler stone has formed into the steam channels) this may happen.

Nov 04, 2009 | Tefal Irons

1 Answer

Steam from rowenta preassure iron and steamer


Hi, It is likely you have too much residual water in the iron or have mineral deposits from the tap water you have been using. Rowenta recommends that you use clear filtered drinking or bottled water only. I believe them because the system uses brass & aluminum throughout, so salts or acids would cause corrosion. To clean the system totally, after each ironing session before I put it away, I remove the blue reservoir completely, and run the burst of steam several times until the boiler is empty, and red light indicates it is out of water. I shut the power off and unplug. Wait at least an hour or so, access the boiler tank plug on side & if it is cool to the touch, remove it using a coin (quarter), drain and flush the tank several times with the cleaning tube that came with unit or filtered/drinking bottled water several times over the kitchen sink. Finally, drain all the water completely out of the boiler (I leave the plug & cover off to making sure it is completely dry before putting everything back together, ready for the next time). After several use cycles of the above should clear out the debris. My 1st experience with a used DG980 had exactly the same problem. P.S. before ironing the first article, use several bursts of steam away from the ironing board surface to clear out any standing water that was is in the system. Hope this helps :O)

Apr 16, 2008 | Rowenta DG-980 Iron

2 Answers

Tefal Pro Express Steam Generator doesn't.


OK... so I have fixed my problem of NO STEAM, just lots of water coming out of the iron press plate itself... I had already cleaned the boiler, so I tried adding 1/4 tsp - 1/2 tsp bicarbonate soda to the water and flushing it through. From what came out of the iron press plate, I would say the problem was caused by a build up of goop (technical term) inside the iron. Once cleared, the iron is steaming away again. Please note, u will need to have an old towel handy if this is ur problem, 'cos until it starts getting better, there is a fair amount of water coming out of the iron press plate. Just add the bicarb to the water reserve and use the steam buttons to bring the bicarb through. Do not attempt to iron clothing with the bicarb in the water!!! Carolyn ;)

Nov 12, 2007 | Tefal Ultraglide 1549 Iron

Not finding what you are looking for?
Reliable i30/120V Professional Steam Iron Head Only, Aluminum Soleplate, 32 Steam Chambers, 7 Foot Cord, Hose for i500, i700 Boilers ITALY Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Reliable Irons Experts

john h

Level 3 Expert

22486 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Bill Boyd

Level 3 Expert

53755 Answers

Are you a Reliable Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...