Question about Avantco Refrigeration Refrigerators
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Replace the thermostat which is located on the back of the unit underneath the bins in the very back. If the thermostat goes bad it will let everything just run and run and run. If this has been helpful please rate
Posted on Feb 12, 2009
Leads me to believe the thermostat is not working. See if you can find the model number located on the bottom frame near floor behind fresh food section door and I will be able to help you better, Thanks, Sea Breeze
Posted on Mar 21, 2009
It sounds as though you have a clogged capillary tube, cannot be sure without suction and liquid line pressures and temps but if you can, ask the tech if the suction pressure seemed to be low, if so, replace the capillary tube with the proper length and diameter tube, replace the liquid line dryer and pull a GOOD vacuum on the system and recharge it, refering to the rating plate for the proper amount and type of refrigerant.
Posted on Jun 23, 2009
Look for doors not properly closing, poor air flow over coil or something blocking air flow, improper freon level.
check out this web site as it has a manual for your equipment. it has lots of good info. Hope this helps. If you need more help, let me know.
Posted on Jun 13, 2010
Tips for a great answer:
Sep 19, 2016 | True TSSU-48-12 - 48 Sandwich Salad Prep...
Oct 10, 2014 | True TSSU-48-12D-4-ADA 49" ADA Compliant...
Sep 28, 2014 | Refrigerators
May 19, 2010 | True 598-TSSU608ADA SandwichSalad Unit 155...
Jun 22, 2009 | Fogel FOG-FLP4512 Undercounter Sandwich...
Apr 05, 2009 | True Refrigeration Mega Top Sandwich Salad...
Feb 12, 2009 | Turboair Turbo Air Sandwich Salad Table...
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: