Question about Lexmark Pro901 All-In-One Inkjet Printer
No yellow print at all!
It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...... Blinking Stopped...........Issue Resolved....... Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether the Lights are still blinking if it is still blinking...... Get the Printer Replaced!!!!!
Posted on May 13, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: color cartridge
Turn off and unplug your printer from the wall for a few minutes. Plug it back in and turn it on? If that doesn't work, remove the color ink and make sure the contacts on the cartridge are not smudged, reinsert the ink. If that didn't work re-install the old color cartridge and reboot the computer then try to change to the new color. Let me know what happens, Good Luck, Tim
Posted on Feb 15, 2007
SOURCE: black cartridge not printing
This is what worked (so far) with my Dell AIO A940 printer that wouldn't print black ink.
It worked for awhile when I chose photo/glossy paper, but then it quit printing again (see below).
PRINT, PROPERTIES, PAPER SETUP, SPECIALTY PAPER, PHOTO/GLOSSY
I got it to print, again, by putting SEVERAL papers in the feeder (instead of just 1) - there is a sensor that is supposed to automatically detect paper type, and it might not be working right, especially with one or only a couple of sheets.
Posted on Feb 02, 2008
SOURCE: lexmark X1195
I re-cleaned cups and wiper between cups with syringe and meth. spirits. Also realised that the cartridges that I had tried that hadn't printed could have melted the jets, so found an old one , filled it right up, then withdrew at least 2cc with refill kit tools. Prints fine now.
There was a lot of sticky ink residue on the wiper (what I assume the strip between the two rest cups is) that could have blocked jets.
Posted on Mar 15, 2008
take the colour cartridge out, clean the printer were the ink goes through with a damp cloth then replace cartridge push down firmly about 5/6 times as though you are doing compressions
Posted on Nov 21, 2008
printers do not like being left unused.
The print head may be blocked. Try several deep cleaning of the print head to see if it can clear the blocked print nozzles.
If none of this works then the print head needs to be replaced. A new cartridge will not solve this problem.
NOTE the print head is not a cheap item, you may consider putting the money towards a new and better printer.
Posted on Nov 14, 2010
Tips for a great answer:
Apr 02, 2014 | Canon MX882 All-In-One InkJet Printer
Oct 17, 2017 | Epson Workforce 610 All-In-One InkJet...
Aug 04, 2011 | Canon PIXMA iP4000R InkJet Printer
Mar 06, 2017 | Canon BubbleJet i560 InkJet Printer
Dec 17, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
Dec 17, 2009 | Canon MP610 Photo All-In-One Printer
May 01, 2009 | Canon PIXMA iP3500 Printer
Mar 11, 2009 | Canon PIXMA iP90 Mobile Printer
Feb 10, 2009 | Epson Stylus Photo RX680 Printer
103 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: