Question about Jensen VM9510 Car DVD Player
I have set my jensen uv7i to a turn on volume of 5 and now want it back to where it is normal so when I turn the unit back on it will be at the volume it was when I shut it down but can't seem to make it go back. I tried the reset button but it has no effect on the turn on volume I set it at. The manual does not tell you how to get it back to the defult volume setting. Can you help?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: JENSEN vm9510 NO VOLUME
I am going to assume you are making a standard DVD-Video disk, since the other format takes more specialized and much less common software. One likely possibility is that you have authored your disks with mpeg audio rather than Digital Dolby (AC3) or linear PCM (LPCM) audio format. MPEG format audio is commonly used in home DVD authoring but is seldom if ever found on commercial disks. my guess is that your car player isnt set to properly decode mpeg audio disks. I would suggest you go through the menus / owner instructions for your car player and find the menu setting which allows your car player to play back mpeg (rather than Digital Dolby or LPCM) audio, and your disks should then play fine in the car. Hope this helps.
Posted on Feb 15, 2006
SOURCE: jensen vm9411 no sound
Check to make sure your vehicle does not have a factory amplifier. If you used a fit kit with wiring harness. try looking at how many wires were used in the factory unit compared to haw many you are using now. see if there are extra wires in the vehicle. If there is extra wires it is a pretty good clue the vehicle has an amplifier and will have to be rewired.
Posted on Sep 01, 2006
Heres the best way to fix; Quote from manual "Programmable Turn-On Volume (Pg.12) This feature allows the user to select a turn-on colume setting regardless of the colume setting prior to turning the unit off. To program a specific volume level, push and hold the VOL/LOC/DV know (6) while the yellow volume bar is displayed on the screen. The unit will beep two times to confirm your turn-on volume setting." Ah i had the same problem. I turned to the manual and it worked for me :) Good Luck, Ern
Posted on Nov 30, 2006
Yo, I've got the perfect solution to your problem. Pull out the head unit from your dash. Then, remove the wiring harness carefully from the unit. Now, push in the yellow power wire (even jiggle it a little) making sure it's tightly snug the small port of the wiring harness. Then, plug the harness back into the unit and try turning it on. I've found that the wires come lose easily on this unit. hit me back up at Darkintel74@aol.com.
Posted on Mar 28, 2008
Tips for a great answer:
Nov 17, 2009 | Jensen Car Audio & Video
Mar 10, 2009 | Jensen Car Audio & Video
Dec 28, 2008 | Car Audio & Video
Dec 10, 2008 | Car Audio & Video
Mar 03, 2008 | Jensen VM9510 Car DVD Player
Mar 27, 2007 | Jensen VM9020TS Car DVD Player
Oct 23, 2006 | Jensen VM9410 Car DVD Player
Sep 04, 2006 | Jensen JR500 Remote Control
336 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: