Question about Tag Heuer Aquaracer Quartz Chronograph CAF1112.BA0803
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Probably your watch has a screwdown crown and prior to attempt any
settings you have to unscrew it. Some peoples fingers are stronger then
others, so, try that with a pair of plyers. Cover your crown with a
soft cloth and then grip with plyers(this will avoid any damage).
Thread is right handed and unscrewing is done by turning the crown
After setting the time don't forget to screw the crown back- it is for water resistance.
If you are unable to unscrew the crown, that means your watch is rusty and you will need watchmakers help.
PS If the watch is rusty, you can brake the crown off while trying to unscrew it. Don't panic yet, as in this case you will need a watchmaker anyway.
Don't forget to rate, please.
Posted on Jan 10, 2009
You should go back to the watch repair shop and ask for complete check-out of your watch. No watchmaker can return the watch to the customer without properly checking all the gearwork, timekeeping, battery power and all the features the watch has.
As your watch was serviced and the battery replacement took place, the executives of all the work done are responsible for all the faults your watch is having right now.
As watch repairs are quite expensive and time consuming, they (probably) will argue with you about this issue, but DO NOT give up, as these are YOUR consumer rights to ask for the job to be properly done (under warranty or paid by you). In case if you will be turned down, ask for FULL refund and find another shop.
If the repair shop is ready to undertake the job again, do not rush them, as the complete watch overhaul and check may take up to 6 weeks (this MUST be done at no any cost to you if you have the warranty or allready paid for the job).
P.S. I suspect that there is some fault in your watch geartrain, because if it is shooked or moved, the watch works, but when idle-it stops. That means the service of your watch was NOT DONE properly, and some failure or even dirt in geartrain was missed by the watchmaker (sometimes it happens- nobody is perfect!). This doesn't mean you have to agree with it, so, go and get your watch properly serviced and checked out.
Do not forget to rate, please.
Posted on Mar 09, 2009
Tips for a great answer:
Jan 17, 2014 | Tag Heuer Aquaracer Calibre S...
Sep 13, 2013 | Tag Heuer Watches
Nov 18, 2010 | Tag Heuer 2000 Exclusive Qtz Chrono...
Sep 21, 2010 | Tag Heuer WAF2110.BA0806 Aquaracer...
Jul 23, 2010 | Tag Heuer Automatic Chronograph Series...
Mar 23, 2010 | Tag Heuer Aquaracer Chrono Automatic...
Feb 23, 2010 | Tag Heuer 2000 Exclusive Qtz Chrono...
Feb 11, 2010 | Tag Heuer Aquagraph CN211A wristwatch
May 21, 2009 | Tag Heuer Aquaracer Chrono Automatic...
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: