Question about HP LaserJet 3055 All-In-One Printer

2 Answers

Printer Hp Laserjet 3055 giving error message 5

Printer / Scanner Hp Laserjet 3055 giving error message 5 when powering up printer

Posted by on

  • 1 more comment 
  • Anonymous Apr 29, 2009

    Carta non prel.

    Premere [x]

  • MTreeBandit May 11, 2010

    Just 5? No other message is displayed? The 3055 has a known problem (known to HP) with the formatter board and if your printer falls within the correct serian number range (or is in warranty), you should be able to get it repaird free of charge. Call HP's tech support (1-800-HP-INVENT) and find out if yours is one of them. The formatter is not too hard to replace, so if you can convince them to send you the board rather than take it to a service provider, you just remove the left side cover, and there's the formatter. Remove the cables connected to it (they are keyed so plugging them back in to the right places is easy) and 4 screws and put the new on in its place.

  • naeem qureshi Nov 13, 2013

    i want self formater card repair pelease tell me abot this problem

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 102 Answers

If you scanner error 5 or printer hangs at scanner bulb warming up than the issue is with Scanning Assembly inside the printer and it is hardware issue.

Posted on Jul 02, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,653 Answers

HP 3055’s have a known problem with the formatter board and if your printer is in warranty you should be able to get it repaired free of charge. Call HP to clarify. If not get it to a repair shop for a quote.

Posted on Aug 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to solve scanner error 5 in HP LASERJET 3055?


The stepper motor controlling the scan arm is defective. Replace motor or entire unit.

Aug 07, 2014 | HP LaserJet 3055 All-In-One Printer

1 Answer

Please give explanation & soulation hp laser jet 3055 scanner error 6 \r\nWhy this problem are create in our printer


Scanner error #6 = DocOriginFind
Per the service manual here are the steps:

1 - Power Cycle the Machine (I'm sure you've done this already)
2 - Replace the Scanner Assembly (After replacing this if the message still appears then.. )
3 - Replace the Formatter and Line Interface Unit (LIU)

Oct 20, 2010 | HP LaserJet 3055 All-In-One Printer

2 Answers

SCANNER ERROR


Message comes with Printer Scanner Error 6
Turn Off Then on

Jul 21, 2010 | HP LaserJet 3055 All-In-One Printer

1 Answer

Hp laserjet 3055 has code 52 scanner error and wont print or copy


PRINTER ERROR The laser scanner speed is incorrect. X description: 1 = Scanner startup error 2 = Scanner rotation error 1. Press GO. The page containing the error will automatically be reprinted. 2. Turn the printer off and then on. 3. Reseat cables to the laser/ scanner and engine controller. 4. Replace the laser/scanner.

Jan 15, 2010 | HP LaserJet 3055 All-In-One Printer

2 Answers

Scanner Error 6 Turn Off Then On


Dear Sir,

Welcome to Fixya

1.Switch off the printer, then remove all cables connecting to the printer but just the power cable.

2.Then press and hold the *(start/symoble) and 5 button togather and turn on the printer,continue holding the button till you see "perment storage init" displayed and release the button.

3.Then at a given point of time the printer will ask you to change laguage,time,date etc.

if this does not sort the issue service is required.
I think it deffinately helps.If you have any problem regarding this issue leave a feedback we were happy to assist you


Have a Nice Day!

Oct 03, 2009 | HP LaserJet 3055 All-In-One Printer

1 Answer

HP 3055 model scaner problem


i want repair HP laserjet 3055
Scanner error 6

Sep 15, 2008 | HP LaserJet 3055 All-In-One Printer

8 Answers

HP Laserjet 3055 with "scanner error 6 - turn off and on" error


hp laserjet 3055 by scanner error 6
Solution: I found a very small piece of paper between the glass and the scanner housing. The lamp's seen that and sent the error message. Nobody find that little stucked paper and the "IT expert" sad: need to buy a new machine because he can't repair it. So, sometimes the solution is very easy just need some attention. :)

Apr 27, 2008 | HP LaserJet 3055 All-In-One Printer

7 Answers

Hp 3055 laserjet scanner problem


When powered on printer 3055 it gives error on control panel that
"Scanner error 6 Trun off and then on "
after several restart printer gives the same error
what will be the problem

Dec 20, 2007 | HP LaserJet 3055 All-In-One Printer

Not finding what you are looking for?
HP LaserJet 3055 All-In-One Printer Logo

2,410 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...