Question about Motorola Mag One Bpr40 Uhf 4w 8 Channel Two Way Business Radio Used

1 Answer

Mt mag one bpr40 uhf 450/470 will receive but will not transmit. green light is on all the time

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 623 Answers

It probably has "busy channel inhibit" turned on in the menus, and the squelch is open, thus making it think there is a signal on the channel you're trying to use.

Posted on May 04, 2014

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
eradiostore

eradiostore

  • 1655 Answers

SOURCE: How do I connect Mag

The Mag One BPR40 is dealer programmable. You have two choices:

1) Reprogram your CP100s to match the new BPR40s. For this you would need to know what the dealer programmed the BPR40s to... OR
2) Take your BPR40s back to the place of purchase and request they reprogram them to match your CP100s. This should be a free service since you just purchased the BPR40s. They will need to know some settings from the CP100s to make the match.

Best regards.

Posted on Sep 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not transmit or receive


Contact Motorola Solutions. Get Support .

Mark
Motorola Mobility Support

Jul 17, 2015 | Motorola Mag One BPR40 Two Way Radio

2 Answers

How to I syncronize all my radios so they work together


Karen-

Contact Motorola Solutions

Get Support

Mark
Motorola Mobility Support

Jan 09, 2015 | Motorola 4 Magone Bpr40 Uhf

1 Answer

Mag One BPR40 not powering


Contact Motorola Solutions (http://www.motorolasolutions/support)

Jun 26, 2014 | Motorola Mag One BPR40 Two Way Radio

1 Answer

Mag one wont get reception


First you check the volume, turn the volume, then you check your speaker. If both are ok then you check QT and DQT. These character must be same.

Jan 14, 2014 | Motorola Mag One BPR40 Two Way Radio

1 Answer

Green light stays on bpr40


If this is after programming your radio needs repaired. We see this when some BPR40s are reprogrammed. Take the radio to your local service center or send to a qualified repair center.

Sep 12, 2013 | Motorola Mag One BPR40 Two Way Radio

1 Answer

My mag one bpr40 will not transmit. the green light is on all the time. it will receive. how do i fix this problem


Green light coming on and staying on... Sadly nothing the end-user can do to alleviate this problem themselves. It is usually repairable by a trained/equipped repair facility.

Sep 01, 2013 | Motorola Mag One BPR40 Two Way Radio

1 Answer

Have two bpr40 need to find out the frequencys


The BPR40 is a dealer programmable radio. The frequencies would need to be read out using Motorola proprietary software. The only thing you can tell from looking at the radio is whether it is VHF or UHF. Model number AAH84K... is VHF and AAH84R... is UHF.
Best regards.

Aug 20, 2013 | Motorola Mag One BPR40 Two Way Radio

1 Answer

The green light that indicates that some one it talking and goes red when you key always slays on


This is an indication of a receiver problem. Two things cause this. The receiver needs to be realigned or you have bad ceramic filters that need to be replaced.

Sep 12, 2011 | Motorola Mag One BPR40 Two Way Radio

1 Answer

My magone BPR40 radio isn't sending when PTT is pushed. It is receiving fine. Any suggestions?


A couple of thoughts:
1) Check the mic hole and see if it is covered or clogged with debris.
2) Does your PTT button seem hard or the opposite, mushy? You could have an internal PTT issue. The PTT is a common failure part on 2-way radios. Feel around for the 'sweet' spot and see if you can make a simple or partial transmission, or if it will even momentarily open up the receiver on the other unit. If so, your radio is in need of repair. It would likely need a new internal PTT. (At most repair centers where the BPR40 is repaired the flat rate repair currently are around $69 for the BPR40)
3) Has any reprogramming been recently done on the radio? If so, double check the programming to be sure your PL/DPL code is set the same as your other radio.\
4) Check your battery. Trade batteries with the other unit and see if the problem changes. It takes more energy to transmit than to receive.

Best regards.

Jun 15, 2011 | Motorola Mag One BPR40 Two Way Radio

Not finding what you are looking for?
Motorola Mag One Bpr40 Uhf 4w 8 Channel Two Way Business Radio Used Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

396 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...