Question about Stanley Utility Knife

Open Question

Jammed blade - Stanley Utility Knife

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

B&D CMM1200 won't start/blade doesn't spin. Fully charged & it tries to start - blade moves maybe 1/4 inch, there's a "clunk" & that's it. Blade, blade insulator & spacer replaced with no difference.


This suggest that there is something jamming the motor and stopping it from running. Assuming you have checked that the blades are clean and there is no grass build up on the underside, it means that there is something in the motor that is jamming it. This might be something that has fallen into it, or something that has broken. The only way to find out is to pull it apart and check what is jamming it.

May 23, 2016 | Garden

1 Answer

Blade stuck in dw331 blade clamp


I've been all over the internet with this because the blade clamp on my 331 is jammed as well. It turns out DeWalt has redesigned the blade clamp, I'm guessing they did this because the original design jams. Solution: call DeWalt. Tell them that you have the old and now obsolete blade clamp that is prone to jamming, and that yours is stuck making your saw worthless. Ask them to send you the new redesigned clamp that is supposed to work better. You swap out blade clamp by removing two hex head (allen) screws.

The new style blade clamp for the 331 is part number: N072135SV

*The obsolete part #: N072135, 586203-00 and 589148-00

Good luck getting DeWalt to send you the working part for free.

Jul 07, 2014 | Dewalt Saws

1 Answer

How can I fix a jammed Ryobi miter saw blade?


Probably go a piece of wood between black and safety cover. Unplug from power before checking

Apr 30, 2014 | Ryobi 18 Volts Cordless Miter Saw 18v P551

1 Answer

Ryobi mitre saw jamming when cutting


There's a normal adjustment process of squaring the blade to the table, page 19 of your manual. If the blade is not square to the table then it will bind. Here's the link for the manual, see page 19.


http://manuals.ryobitools.com/system/files/400/original/TS1342_942_eng.pdf?2011

Dec 21, 2013 | Ryobi ZRTS1342L Factory-Reconditioned 14...

1 Answer

Blade will not lock


I advise you to jam the blade against a piece of wood to jam the blade for removal, remember that the bolt holding your blade on is reverse threaded and self tightening so don`t over tighten.
I always use this on the job-sight for it is easer than fumbeling for the lock button with gloves on

Oct 10, 2013 | Saws

1 Answer

John deere js35 walk behind mower trouble shooting


It probably partially sheared the flywheel key. That's what it's supposed to do in case you jam the blade. You'll need to remove the flywheel and replace the key. The partially sheared key offsets the timing and then it wont start. First I would check to see if the crank didnt get bent when you jammed the blade. Turn the blade by hand and watch to see if it wobbles. If it does you have bigger problems.

May 08, 2012 | Garden

1 Answer

My cub cadet zero radius mower will die when I engage the blades. it seems that the blade is jammed but I do not see anything jamming it.


flip the mower up on its back, supporting it properly so it doesn't fall on you. you should be able to turn the blade(s) manually, if not then something is preventing it from turning. if there is nothing in the blade box jammed, it may be in the belt drive assembly, perhaps a stick or rock flew up in there and got caught, it happens quite often. the only other thing might be bearing on the shaft have locked up, but you would have heard this happening long before they actaully froze, good luck

Mar 23, 2011 | Garden

1 Answer

HOW DO I REMOVE THE BLADES? I THINK SOMETHING IS


i do not think the blade's are removable.look underneath unit ,in the center there may be a hex/allen bolt that is use'd to unjam the blade's/disc. it also may be easie'r to remove unit to work on

Apr 22, 2010 | Ace Hardware InSinkErator Badger 5, 1/2 HP...

1 Answer

Blades won't turn


If the problem is that the blades are jammed and you can't turn them manually, you can let it sit ( and dry out ) for a few days, or you can try adding some oil. I had the same problem and this worked. My problem now is that the blades don't reach to where the motor is turning, so even if they're not jammed the don't turn. If anyone knows and answer to this I'd appreciate it.

Jan 24, 2008 | Oster 6678 14 Speed Blender

2 Answers

HR Specialist


try saturating left over paper with shredder oil and let sit for 4-5 hours or more this should soften paper enough to remove easier although it may be a little messy

Dec 27, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Stanley  Utility Knife  Logo

Related Topics:

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stanley Cutter Tools Experts

Joe Garcia
Joe Garcia

Level 2 Expert

206 Answers

Joseph Hoffmann

Level 3 Expert

1755 Answers

JOHN LAPIER

Level 3 Expert

2591 Answers

Are you a Stanley Cutter Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...