Question about Adidas Clothing Accessories

Open Question

Right temple arm hinge will not hold temple in hinge socket.Broken pin I think. Are these replaceable? adidas retego polarized

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

T chandrasekhar

  • 103 Answers

SOURCE: a pin that holds the

hi
since the pin is broken only the authorized dealer who deals with your brand can get it fixed if your sun glasses is under warranty period then you can get it done for free . if not you need to approach other dealers to get the work done .i shall give you site address try checking it out


http://www.sunglassreplacementlenses.com/



If you are happy with my answer please vote four thumbs up. Thank you

Posted on Dec 17, 2010

Ad

T chandrasekhar

  • 103 Answers

SOURCE: I broke the right ARM/Temple

try this site it may help you



http://www.sunglassreplacementlenses.com/




thanks

Posted on Dec 30, 2010

jyackle5

Jyackle5

  • 8197 Answers

SOURCE: I have broken my Under Armour Zone sunglasses LEFT

Sorry we do not sell parts. We try to help you fix them yourself.

Try the link below to order parts.

http://www.framesdirect.com/framesfp/Under_Armour-tdoimi/lb.html

Posted on Jan 22, 2011

Caroline Mizar

  • 24 Answers

SOURCE: Where can I get /order

try this website

adidas spare parts: we supply all spare parts and replacement ... - [ Diese Seite übersetzen ] adidas spare parts: we supply all spare parts and replacement lenses for your adidas sportsglasses or sunglasses.
www.ad-sportbrillen.com/adidas-spare-parts

Posted on May 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SERIAL NUMBER 571232


Whats the Question. Here are the specs of what I think you are asking about.
SKU: CU-334E544C39 Smith & Wesson Safety Glasses 19855 This contoured design is complete with rubber grip temples for a more secure fit. Safety Glasses, Series Smith & Wesson(R) 38 Special, Gender Unisex, Lens Color Blue Mirror, Polarized Lens No, Lens Coating Scratch-Resistant, No Foam Lined, Eyewear Frame Design Wraparound, Eyewear Frame Style Full-Frame, Frame Color Chrome, Eyewear Size Universal, Frame Material Nylon, Lens Material Polycarbonate, Temple Color Chrome, Temple Style Ratchet Hinge, Photochromatic Lens No, Metal Detectable No, X-Ray Detectable No, UV Protection 99.99 Percent UVA/UVB, Standards ANSI Z87.1+ 2010 https://www.shop.com/Smith+Wesson+Safety+Glasses+19855-1579966230-p+.xhtml?sourceid=298&gclid=Cj0KCQiAkNfSBRCSARIsAL-u3X-48mMYWeuydAxWgqybEmPqIugmO3kiTwjX1SB8EjwLqAnzQMYw76oaAuwPEALw_wcB#product-details

Jan 23, 2016 | Jackson Smith & Wesson 38 Special Safety...

4 Answers

I need a replacement arm for rb2030 ps8 w2175


I'm in need of Ray Ban PS8 W2175 right temple as well.
Could anyone help, please?
(Or the whole frame, just to use the lens in good condition)

2d67df0a-3a58-4e06-9ee1-cc3f77a4ba44.jpg

Feb 05, 2014 | Ray-Ban RB 2030 Sunglasses

1 Answer

Dell latitude c610 broken hinge


go www.dell.com give your service tag, model and download your instr. manula and service manual , parts and fix it.

God bless you

Sep 27, 2012 | Computers & Internet

1 Answer

Where can you get a replacement strap? for the Adidas VSC 370


well only place is from manufacture , email them , call or write for a price on a new band.manual has it. this is called model specific band. may be able to google it.some places sell knoff off but i think its a long shot. question ; this may be a cotter pin or spring bar issue w.. so is it broken in a certian palce? if it is detached from watch spring bar replaced, if it has a hole and an arrow that is where a cotter pin can be replaced.

Jun 17, 2011 | Adidas VSC 370 watch #105054101 Watch for...

3 Answers

Where can I get /order online a replacement right side arm for my adidas A262 sunglasses Thanks Shay Atkinson


try this website

adidas spare parts: we supply all spare parts and replacement ... - [ Diese Seite übersetzen ] adidas spare parts: we supply all spare parts and replacement lenses for your adidas sportsglasses or sunglasses.
www.ad-sportbrillen.com/adidas-spare-parts

May 15, 2011 | Adidas A262 Sunglasses

1 Answer

THE CLIP IN ARM HAS BROKEN CAN I BUY ANOTHER ARM all it says on the arm is curitiba ah22 00 6050 and on the other arm made in austria


hi
i dont think it will be a problem .first check out if your sunglasses is in waranty period if it is then just approach the authorized dealer he will get it replaced if it not in warranty . then just approach the dealers who deal with branded sunglasses they get it replace it may costa little but then knw what arm suit exacty your sunglases. i shall give you site to refer it may help you

Dec 14, 2010 | Adidas Clothing Accessories

2 Answers

How can you get saddle bag open, that latch is screwed up?


The solution to this problem, unfortunately, will involve the destruction of two hinge pins; since the hinge is sold only as an assembly, the entire hinge will have to be replaced. I'm sorry about that, but I thought you ought to know that before you start the repair.

Look at each end of the hinge (on the outside of the bag); you will notice a hole and (it may take a flashlight to see it) the end of a hinge pin within. Those hinge pins will have to be driven toward the center of the hinge until the hinge halves separate; that's much less than an inch, but is SEEMS more like 30 feet. Use a nail set that fits loosely in the hole, or a hardened nail about the same size with the tip ground flat.

Once the hinge halves separate, you'll find that you can lift that side of the saddlebag cover only a very short distance; the nylon fabric hinge cover on the inside keeps the cover from opening more than a VERY few inches. The hinge cover is secured by 3mm hex bolts; use a 3mm allen wrench to remove the bolts and the saddlebag top should swing open far enough for you to get your hand inside.

Take a flashlight and examine high on the opposite side of the saddlebag, inside the bag just underneath the cover; there are two catches covered by a broad plastic shield. Use your 3mm allen to remove the plastic shield, then use a small socket to remove the bolts holding the catches to the bottom part of the saddlebag. You can now lift the top of the saddlebag off and reveal the bottom of the catch.

The cover of the catch is secured by 1/4-turn fasteners, you'll see the phillips-head slots. Turn the screwheads until all fasteners are obviously loose; the cover can then be removed. There is a bent catch actuator arm beneath; push the top (free end, well, actually MIDDLE) of the arm toward the outside of the saddlebag cover, and the catches you removed from the saddlebag can be freed and remounted on the saddlebag.

You'll see the bottom of the release button through the catch actuator assembly; push it out, back to its' normal position. You're likely to find one of two things wrong: the actuator arm (4XY-2841A-00-00) is bent or broken, the lock assembly (4XY-W2843-00-00) has a bent or broken actuator tab or lever. A bolt may also be missing from either the actuator arm or lock assemblies; that would typically cause misalignment or binding.

Replace the hinge, reassemble the saddlebag top with the appropriate repair parts, mount and take a nice, long ride to relieve the frustration.

Mar 18, 2010 | 2008 Yamaha Royal Star Venture

1 Answer

Can not get saddle bag open the lach is messed up and won't open


The solution to this problem, unfortunately, will involve the destruction of two hinge pins; since the hinge is sold only as an assembly, the entire hinge will have to be replaced. I'm sorry about that, but I thought you ought to know that before you start the repair.

Look at each end of the hinge (on the outside of the bag); you will notice a hole and (it may take a flashlight to see it) the end of a hinge pin within. Those hinge pins will have to be driven toward the center of the hinge until the hinge halves separate; that's much less than an inch, but is SEEMS more like 30 feet. Use a nail set that fits loosely in the hole, or a hardened nail about the same size with the tip ground flat.

Once the hinge halves separate, you'll find that you can lift that side of the saddlebag cover only a very short distance; the nylon fabric hinge cover on the inside keeps the cover from opening more than a VERY few inches. The hinge cover is secured by 3mm hex bolts; use a 3mm allen wrench to remove the bolts and the saddlebag top should swing open far enough for you to get your hand inside.

Take a flashlight and examine high on the opposite side of the saddlebag, inside the bag just underneath the cover; there are two catches covered by a broad plastic shield. Use your 3mm allen to remove the plastic shield, then use a small socket to remove the bolts holding the catches to the bottom part of the saddlebag. You can now lift the top of the saddlebag off and reveal the bottom of the catch.

The cover of the catch is secured by 1/4-turn fasteners, you'll see the phillips-head slots. Turn the screwheads until all fasteners are obviously loose; the cover can then be removed. There is a bent catch actuator arm beneath; push the top (free end, well, actually MIDDLE) of the arm toward the outside of the saddlebag cover, and the catches you removed from the saddlebag can be freed and remounted on the saddlebag.

You'll see the bottom of the release button through the catch actuator assembly; push it out, back to its' normal position. You're likely to find one of two things wrong: the actuator arm (4XY-2841A-00-00) is bent or broken, or the lock assembly (4XY-W2843-00-00) has a bent or broken actuator tab or lever. A bolt may also be missing from either the actuator arm or lock assemblies; that would typically cause misalignment or binding.

Replace the hinge, reassemble the saddlebag top with the appropriate repair parts, mount and take a nice, long ride to relieve the frustration.

Mar 17, 2010 | 2006 Yamaha Royal Star Venture

Not finding what you are looking for?
Clothing Accessories Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Adidas Clothing Accessories Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

john h

Level 3 Expert

22486 Answers

Rory Kriest
Rory Kriest

Level 2 Expert

68 Answers

Are you an Adidas Clothing Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...