Question about Kicker Car Audio & Video
Had the sub hooked up in parallel to 2ohm which the zx amp is 750.1@2ohm. the sub is rated at 600w rms and 1200w max. The sub was turned down half way and all the settings on the stereo was all the way down to break in the sub. two days later it locked completely extended and smoking like a train. what caused this?
MY BEST GUESS FROM WHAT YOU HAVE SAID IS THAT THE BOX WAS TO SMALL. BUT YOU ARE OVERPOWERING THE SUB RUNNING IT AT 2 OHMS ON A 750 WATT AMP WITH A SUB THAT IS ONLY RATED FOR 600. NO MATTER HOW FAR YOU TURN YOUR SETTINGS DOWN, YOUR STILL PUSHING TO MUCH POWER FOR THE SUB TO HANDLE. IT IS ONLY RATED 600 WATTS FOR A REASON. ESPECIALLY IF YOU LISTEN TO MUSIC THAT HAS A REAL LOW END AND THEN A HARD HIT. REMEMBER A HARD HIT WILL SPIKE YOUR AMPS OUTPUT THEREFORE PUSHING MORE WATTAGE TO THE SUB.
I’m happy to assist further over the phone at https://www.6ya.com/expert/chris_ec38c09da1ae48dd
Posted on Nov 20, 2013
What about kicker 1000 watts mono car amp class D sub amplifier DX1000.1- (2) ohms and a pioneer champion series pro TSW300D2 12" SUB elements 1-way RMS 1000 WATTS/ DUAL 2 VOICE COILS. how would you connect the speaker + to + or what?
Posted on Nov 27, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: is it enough
Audiobahn subs are not too powerful and they can not handle too much continuous RMS, be careful they will heat up and tear off the voice coils off ur subs. run about 100 - 150 RMS at 75 HZ to each sub and keep the gains at about 3/4 this way you will avoid blowing out your subs. It also depends on the amp? What kind of amp is it? Let me know if you wish. Otherwise
Audiobahn subs are not too powerful and they can not handle too much continuous RMS, be careful they will heat up and tear off the voice coils off ur subs. run about 100 - 150 RMS at 75 HZ to each sub and keep the gains at about 3/4 this way you will avoid blowing out your subs. It also depends on the amp? What kind of amp is it?
Let me know if you wish. Otherwise
Posted on Oct 21, 2007
SOURCE: amp getting really hot
If depends on what the amp is rated to run. If it is only rated to run 2 ohms x2ch then it can only run 4 ohms x1ch. If you run it at 1 or 2 ohms that is too low, too much current, and it will get hot and eventually blow up under hard use. Some quality amps can live that way, and it depends on the sub and what frequency you are running it at. For normal use I would not recommend it. Wire to sub at 4 ohms x1 (or 2 ohms x2ch) for that amp if that is what it is supposed to be at, I'm not sure from your description. Also enhance cooling of the amp if you can, I run fans on mine if they have a heat issue. Warm is one thing, hot is another and not good for amp.
Posted on Apr 22, 2008
ok this gets confusing sometimes. Ok first look to see what ohm your subs are. If you have a dual 4 ohm sub When you run that on sub + to + and - to - then that will make that sub 2 ohm. its different on ohm if the sub is say a 8 ohm then putting the wires that way will bring that sub to 4 ohm. Now lets say you have 2 subs that are dual 4 ohm and wire both of them + to + and - to - and go bridge the amp which would be both wires from sub both + together and both - wired bridge on the amp will make it a 1 ohm to the amp. Please post what ohm your subs are and i can tell you alittle more about it
Posted on Oct 23, 2008
That amplifier is 900W x 1 @ 2ohms.
If your subs are 4ohm SVC wired Parallel, resulting in a 2 ohm load, each sub will only see 1/2 of the rated power. (450W ea.)
Your gain (sensitivity) setting should be between 75% and 85% to max. You will be fine.
Posted on Jan 03, 2009
The Kicker L7 has an RMS power range of from 50-750 watts and a maximum power handling capability of 1,500 watts so your Sony amp will power it OK. A more powerful monoblock like the Alpine MRP-M1000 or the Kicker 08ZX750.1 would provide even more power and could operate safely at 2ohms.
You have the voice coils wired properly for the Sony amp. It's OK to have the sub impedance higher, but you definitely do not want it lower than the 4ohms the amp is rated at in bridged mode.
Hope this helps.
Posted on May 26, 2009
Tips for a great answer:
Dec 30, 2014 | Car Audio & Video
Sep 05, 2011 | Alpine MRD-M605 - V12 MONO AMP 600WX1 RMS...
Jul 15, 2010 | Kicker Solo-Baric L7 S15L72 Car Subwoofer
Mar 08, 2010 | Kicker CompVX CVX122 Subwoofer - 12" Dual...
Feb 12, 2010 | Alpine SWX-1042D Car Subwoofer
Aug 02, 2009 | PPI DCX-1500.1 Car Audio Amplifier
Jul 28, 2009 | Kicker Solo-Baric L7 S15L72 Car Subwoofer
Jul 17, 2009 | Polk Audio DB1040DVC Car Speaker
May 26, 2009 | Sony XM-1252GTR Car Audio Amplifier
Nov 26, 2008 | Kicker CompVR 05CVR84 Car Subwoofer
Jun 29, 2019 | Kicker Car Audio & Video
Aug 17, 2018 | Kicker Car Audio & Video
179 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: