Question about General Electric Adora GHDA670N Built-in Dishwasher
I can't get the dishwasher to start or to be able to change settings on the dishwasher
According to the GE repairman who visited, the solution is to close the machine (with the lights flashing). The machine starts and goes through the cycles, which it does rapidly and then all the lights turn off and the machine becomes silent after 1-1/2 to 2 minutes. Then the machine has been reset to normal. During this reseting period nothing happens inside the machine, although you may hear a running sound.
Thus, the solution is to run the machine in this flashing light state for the 1-2 minutes it takes to go raipdly through each cycle and then reset.
I hope this helps.
Posted on Jan 03, 2009
If you can use the internet; then search for GE appliances and look up the manual using the model number. I did; the the two options are to turn off the power and restart it. Their real solution was that someone may have lock the appliance by pushing and holding down on the dry botton for three seconds. If all or some of the lights are on, you can touch the dry botton for three seconds and the controls will unlock. It worked for me. I thought my unit was not balanced or the controls were broken/stuck, but it was only locked.
Posted on Dec 31, 2008
Ok guys, I just had this gigantic piece of **** malfunction on me, exhibiting the same behavior as described - buttons doing nothing.
I looked online and apparently you have to hold the "time delay" button, and the "light wash" button at the SAME time for THREE seconds. You really have to push those suckers in hard, thanks to GE's awesome design on this panel.
After I did that I slammed my fists against the panel pretty hard about 8 times in a fit of rage. Magically the damn thing beeped and I was able to configure my wash (Pots and pans, heated dry, blah).
Whew! Sadly I rent my house, so I stuck with this abomination.
Posted on Dec 21, 2010
I tried the same solution as DYONS above (solution #1)... which is to leave the machine cycle for 1 1/2 - 2 minutes. It did (will) reset itself. Thanks DYONS for your post. My problem was resolved.
Posted on Mar 01, 2009
No water is pumped into the machine (GE quiet power3)???
Posted on Jul 24, 2010
When mine beeps and random LEDs come on and won't start I throw the breaker for 5 seconds and then it is fine.
Posted on Nov 06, 2008
This appliance is a total piece of sh*t. We have tried everything listed above and nothing. I made the mistake of opening the dw mid-cycle to remove something I needed and couldn't wait for, the latch will not make contact to resume the cycle even though the Pots & Pans and the Hot Dry buttons remain lit. It beeps every 10 seconds or so. We had to turn of the breaker switch to get it to stop beeping. Turning the switch back on does not reset this piece of ****.
Posted on Mar 03, 2012
I took apart the white piece to the back of the door, took apart the connections to the display and put them back together, put the white piece back on and it worked, hitting the door was not the answer because one of the clips broke so i just used electrical tape to secure it but it seems to be working fine now
Posted on Dec 05, 2015
Phreak123's answer worked for me. Damn thing Hadnt worked in a week. Tried everything. I held the normal wash button and delay hours button for 3-5 seconds. Ran through a cycle a blinking buttons. Open and close door. Started right up. Thanks!
Posted on Oct 20, 2015
Dishwasher not dr
Posted on Jul 27, 2014
I tried everything listed above: turning the breakers off, holding the buttons down, opening and shutting, everything.
In my frustration I banged my fist on the top of the door while it was open and then shut it. Magically it started cycling.
When in doubt... violence.
Posted on Nov 24, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The average life of dishwashers is 7-10 ten years so it might just be dying but try this. If the leak is a small one that seems to always be near the left side of the dishwasher put a cup of white vinager in the upper rack and run the unit on pots & pans or heavy duty. This is caused by a build up of detergent that make the unit oversuds, when the suds turn back into water it leaks out the left front corner. The amount of water is not huge, one towel to clean up. If the leak is larger it could be the pump is leaking and you can order a new one with your model # from marcone.com
Posted on Nov 27, 2010
Tips for a great answer:
Feb 19, 2015 | Whirlpool GU2400XTP Built-in Dishwasher
Oct 14, 2014 | Dishwashers
Jul 27, 2014 | GE Quiet Power 2 Dishwasher Door Spring 2...
Apr 25, 2013 | Dishwashers
To activate any of the Dishwasher Options listed, follow
Open the dishwasher door far 1. enough to expose the
2. Press the On/Off button.
the MENU/OK button until the desired option appears in the display window.
4. Press the - or + button to step through the available
the desired setting is shown in the display window, press the MENU/OK button to
save the setting. The display will indicate "Value Stored" and return to the
menu. If you did not change the setting, press the start
button to return to the main
6. Select the desired wash cycle by pressing the - or +
7. Press the start button and close the dishwasher door
to begin the cycle.
NOTE: In the Options Step Down Menu, you can
return to the main menu at any time by
pressing the START button.
Feb 20, 2013 | Bosch SHX98M0 24 in. Built-in Dishwasher
Aug 21, 2011 | Whirlpool Dishwashers
Mar 09, 2011 | GE 24 in. Profile PDW9880JSS Built-in...
Dec 08, 2010 | Jenn-Air 24 in. JDB1090AWS Stainless Steel...
Jun 29, 2010 | General Electric Adora GHDA670N Built-in...
May 08, 2010 | General Electric Adora GHDA670N Built-in...
37,577 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: