Question about GE Profile JTP56 Electric Double Oven
I changed both top and bottom elements because the top fist went out then the bottom element went out, so I replaced them and still the oven does not heat up
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Top oven will not heat up
Had a similar problem. The overheat sensor had failed to the open position and the oven control would light up and you could set the temp, but it would drop to 100 degrees and then go blank.
Posted on Jan 06, 2008
SOURCE: Oven will not heat
Although I am not familiar with this oven, living in the u/k, I would say that without any doubt the oven element(s) have failed, more so if the fan is working, so I would have hesitation that you replace the suspect element (s)..
Plz let me know how you get on.Thanks.
Posted on Jan 03, 2009
DO you have a model number for that. I'm almost sure it's a thermal fuse in the back of the oven. Usually they go out during or after cleaning but that would shut down both elements. If you have the model (usually by the inside door look all over and up in the cavity) Then if you go to this link
It will show you a breakdown of the oven and where it is. If you give me the model I'll show you what I'm talking about. Good luck.
P.S. if it the fuse it's a cheap fix, little hard to get in back of the oven but cheap!
Posted on Mar 04, 2009
Tips for a great answer:
Feb 03, 2016 | Ovens
Sep 06, 2015 | Ovens
Jan 31, 2014 | Dacor Ovens
Nov 12, 2013 | Whirlpool 30" Self-Cleaning Freestanding...
Feb 13, 2013 | TurboChef TORNADO Electric Oven
Nov 03, 2017 | Ovens
Sep 06, 2010 | Stoves 720EF Electric Double Oven
Mar 29, 2010 | Ovens
Oct 28, 2009 | Ovens
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: