Question about Rustoleum 224284 10.25OZ Rust Inhibitor Rust-O-Leum
Posted by Anonymous on
The product data sheets states that:
PAINTING If surfaces are to be painted in the future, remove Rust Inhibitor from the surface with a solvent such as acetone or mineral spirits prior to painting.
Posted on May 05, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 12, 2016 | Plumbing
Jun 03, 2015 | Cars & Trucks
Nov 19, 2014 | 2003 Nissan Pathfinder
Sep 15, 2014 | Cars & Trucks
Jun 06, 2014 | Buick Regal Cars & Trucks
You need to buy a
special paint for metal with special additives that prevent rust. Make sure to also buy a primer that is compatible
with the paint you have selected. I
found you some great instructions that should help you out.
the wrought-iron bed frames with a rag that was dipped in mineral spirits. That
will help you to remove all traces of oil and grease from the frames.
• Scrape rusty
areas with a putty knife or scraping tool. Remove all loose rust scale. Rub the
surface with steel wool, too.
• Apply an oil-based primer. The primer needs to be designed for
use on metal surfaces such as wrought iron. Roll on the primer with a small
roller. Spread the primer with a paintbrush. Cover the whole surface with one
coat of primer.
• Paint the
bed frames with a finish paint that has a rust inhibitor within 24 hours of
priming them. That will help the primer and paint bond.
• Roll on the
paint in the same way you applied the primer. Use a paintbrush to make smooth,
sweeping strokes to distribute the paint. Switch to a paintbrush with synthetic
bristles if you decide to use a water-based paint.
Aug 16, 2012 | Furniture
Jan 22, 2010 | 1991 Toyota Corolla
Oct 01, 2009 | Microwave Ovens
Check out this site
these guys sell covers for your fridge and ones to match your other appliances. These are vinyl and magnetic covers which are so much easier than paint. Again, so much easier and neater than paint and the effect is better. They even have stainless steel. I hope this helps you.
Jun 04, 2009 | Whirlpool ET8CHEXSQ Dryer
Nov 10, 2019 | Makita 9227c Polisher Electronic Variable...
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: