Question about Corby Trouser Press 7700

2 Answers

Heating pad is wrinkled so clothes come out wrinkled

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

For anyone else who has this problem(i.e. the pad is wrinkled but other than that fine), I have a Corby trouser press which had wrinkles in the pad so it was pressing those wrinkles into the trousers every time. After considering replacing the pad, finally I though of a simple solution that worked:
Take an iron and carefully iron the creases out. Start at a low temperature and gradually increase it until you have the desired effect. You might need to pop the board out of the metal arms to get a better reach. This can be done fairly easily.

Posted on Oct 05, 2017

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I thought my old one was faulty so I bought a new one and still experience the same wrinkling problem!

Posted on Jul 16, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a replacement plastic part?


Try the place that you bought it. They may have the supplier / manufacturer information of where you can get parts from.

Sep 19, 2015 | Yamata PSS-2001 Power Stand-Up Steamer for...

1 Answer

When has my iron stopped steaming and heating up?


depends on how old it is, try to rinse it with a water and vinegar solution, this might help

Apr 09, 2015 | Euro Cuisine Ootoo Iron, 1500 Watt Steam...

1 Answer

Quest 2600w steam iron


The heating element may have failed.

Jul 19, 2014 | Garment Steamers & Presses

1 Answer

Doesn't steam


the hoses sometime kink when hot then get hard in the kink part once cooled down.. you may need to fin the area and warm it up to let the steam pass..

Dec 13, 2013 | Haan Complete Multipurpose Steamer MS-30R

1 Answer

Where can I get parts for the Yamata PSS-2001? I only need casters.


Best way is to contact manufacture for part information and part dealer near your location

Dec 10, 2013 | Yamata Ricoma PSS-2001 PSS-980 Garment...

1 Answer

Conair Lysol hand held steame


It could be broken but it could also be jammed or clogged by some dirt or water. My first answer would be to get a new one. but if you dont want to throw it away you should take it to a recyling store.i know that is getting rid of it but it is not exactly because you still remember it.

May 25, 2013 | Garment Steamers & Presses

1 Answer

I have a Corby 7700 pants press that does not press the pants


Here are the instructions for this product:
http://www.corbyofwindsor.com/store/uk/info/292/TrouserPressInstructions

Feb 14, 2013 | Corby Trouser Press 7700

1 Answer

Corby 7700 will not heat up enough to press pants


Here are the operating instructions for this product: http://www.corbyofwindsor.com/store/uk/info/292/TrouserPressInstructions#Operating_Instructions

Feb 14, 2013 | Corby Trouser Press 7700

3 Answers

What are the advantages of using a steamer over an iron?


steamers are usually believed to be easier to use and less damaging to the fabric over time

Jan 30, 2013 | Garment Steamers & Presses

Not finding what you are looking for?
Corby Trouser Press 7700 Logo

Related Topics:

2,232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Corby Garment Steamers & Presses Experts

ray gallant
ray gallant

Level 3 Expert

63725 Answers

Bill Boyd

Level 3 Expert

53745 Answers

Tom Chichester

Level 3 Expert

53135 Answers

Are you a Corby Garment Steamer and Press Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...