Question about True GDM-7 Beverage Cooler
How do I access the inside of the evaporator unit at the top of cooler
to place the probe correctly. This is a sliding 2 door model.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 08, 2015 | True TBB-2G-S Stainless Steel Beverage...
Aug 27, 2014 | Danby DKC645BLS Compact Beverage Cooler
May 25, 2014 | Beverage-Air Refrigerators
Mar 13, 2013 | True GDM-7 Beverage Cooler
The beverage center and wine cellars have a temperature display for each zone. 12 volts
AC is supplied to the display board from a transformer in the unit compartment. The displays are only temperature displays and have nothing to do with any cooling function. A thermistor is used to sense temperature for each zone. The thermistor for the bottom zone is located inside the lower portion of the separator. The thermistor for the top zone on the wine cellar, (mid zone on beverage
center), is located in the upper portion of the separator. The thermistor for the beverage center upper zone is located on the inside of the 2-piece evaporator cover. It is on the right-hand side.
The mid temperature for the bottom zones on either unit are 60? Fahrenheit plus or minus 5 degrees. The mid temperature for the mid zone on the beverage center and the top zone
on the wine cellar is 45? Fahrenheit plus or minus 5 degrees. The mid temperature for the
top zone on the beverage center is 38? Fahrenheit plus or minus 5 degrees. I think at tis time you should check each section with a pocket size digital thermometer to cofirm tha the mechanical thermostat is within calibration. Click Here=> 4344690 Temperature Control
Click here for a=> KUWA244PBS Beverage Center Wiring Diagram
I believe the problem may be in the PCB transformer shown at the bottom right corner of the wiring diagram. It is possible o change the transformer but I have not been able to find the board that powers the LED temperature readouts. If needed let me know and I will call Whirlpool mfor you, Thanks, Sea Breeze
Oct 09, 2011 | KitchenAid KUWA244PBS Wine Cooler
Jan 08, 2010 | True TBB-2 Beverage Cooler
Sep 14, 2009 | Avanti (BCA5105SG) Beverage Cooler
Jul 24, 2008 | True GDM-9 Beverage Cooler
Mar 16, 2008 | True T-49 Side by Side Refrigerator...
Sep 17, 2010 | True GDM-7 Beverage Cooler
596 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: