Question about Husqvarna Designer I

1 Answer

Husqvarna Viking Designer 1 keeps breaking needles

I will start to embroider and it's working fine all of a sudden clunk, clunk the needle breaks in half or in three. This is happening all the time now.
I have the floppy Designer 1. ????? Help

Posted by on

  • Anonymous Mar 16, 2014

    how do you put a needle plate back on a Husqvarna Viking E10?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The threading may be out of the channels. Rethread. Put in a fresh needle. Make sure you are using an embroidery needle and a new one for each new project. You can't use YLI bobbin thread. It stinks. If all this doesn't help, take it in to be checked These work great when there is not thread stuck in the bobbin case and it is threaded properly. If all is well, it will go like gangbusters.

Posted on Jun 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased a singer quantum xl-5000 for small embroidery projects about two weeks ago and trying it out. When I am embroidering the top thread looks good but my bottom has a little loop while the bobbin...


Loosen your tension on your tension adjustment. It will show you where in the manual. Just feel it out a little at a time until it feels better and the problem goes away. Stop before the needle breaks and all but some machine you have to work the kinks out.

Oct 03, 2017 | Sewing Machines

1 Answer

Why do my needles break only when doing reinforcing stitches?


This may be obvious but are you changing your needles frequently? A blunt or bent needle can cause this.

Jul 28, 2017 | Brother SE400 Computerized Sewing Machine

2 Answers

Needles break when embroidery carraige moves to sew new area


Check your needle for burrs or bends. If your needle is bent it will hit the plate. Try changing the needle

Mar 19, 2014 | Singer Futura Xl-400 All-In-One Sewing And...

1 Answer

Needles keep breaking when embroidering.


Needle breaks

1.the needle is damaged

2.the needle is not correctly inserted

3.wrong size needle for the fabric

4.the wrong foot is attached

5.the needle clamp screw is loose

6. Top tension is too tight

7. Machine could be out of time

Oct 17, 2013 | PfaFF Quilt & Craft Pro 7530

1 Answer

I have a Toyota expert ESP 850 embroidery machine. While embroidering, the presser foot will become loose and the needle will then hit it and break. I've gone through three needles and I don't want...


Change the needle socket holder, See www.datastitch.com for new needle socket holder.
We also buy toyoa machines used in any condition
larry@datastitch.com

Jul 01, 2012 | Sewing Machines

1 Answer

When I start to try to embroider the red light just blinks and I can not send tothe machine


you might try youtube for video's on embroidery
The needle thread breaks
1. the needle thread is not threaded properly
2. The needle thread tension is to tight
3. The needle is bent or blunt
4. The needle is incorrectly inserted
5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew
6. the threads were not drawn to the rear after sewing
7. The thread is either to heavy or to fine for the needle

Feb 02, 2012 | Sewing Machines

2 Answers

Upper needle thread breaks while embroidering, how can I stop it from doing so?


check to see if the needle is slightly rotated somehow when it was inserted intot he holder, if that appears ok I suggest just changing the needle completely,

Feb 17, 2009 | Sewing Machines

1 Answer

Thread breaks when embroidering


Try changing threads. If you're not using embroidery thread specifically, the "treatments" they use on different threads can really cause problems.

Jan 04, 2009 | Husqvarna Designer I

Not finding what you are looking for?
Sewing Machines Logo

638 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

radcal

Level 2 Expert

196 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...