Question about Bose Wave Radio
First of all, thank you to anyone at least looking at this problem and thinking about what might be wrong. When my Boze wave radio is on AM, there is no sound, when the radio is on FM, there is a very loud sound that drowns out any music. Lights work fine....just a very loud hum when on FM...and the Am won't work at all but has no hum. This is an older model. Thank you!
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Bose Wave radio humming noise
Actually the problem was caused by a bad 470uf cap, that was used to filter the powersupply for all the analog amps. Replaced the cap the unit works like new.
Posted on Apr 06, 2008
SOURCE: Boze Wave clock radio has
depending on how long youve had the unit i mean only to remind you of the 30 days guarantee also i would look close all around the machine's face and sides to make sure that its not set in (output to another system mode.) or mabey you may have a mute button pressed by accident...other than that there are no user servicable parts on the Bose Wave system and it would have to be looked at by a certified tech. hope i could help..
Posted on Jan 28, 2009
Yes. The tuner spacing option should do this. If it's a Wave Music System or a Wave Radio II, go into the 'setup menu' and look for 'tuner spacing'. -If it's older, you may want to call Bose for a solution.
Posted on Jun 12, 2009
SOURCE: Bose Wave Radio AWR1 1W
I can tell you what to check if you know how to use an ohmmeter. But I warn you you could get shocked if you do not know what you are doing. The transformer has 3 windings, two are for DC voltages, and the other is 3V AC.Your meter can measure those using the AC scale. Next, check the voltage on the 3 terminal regulator IC. One leg will have 18V, the output will have 10V. Again please use CAUTION! Finally, the to-92 transistor Q1 is used as a 5V regulator. Check it (with power off and unplugged) for any shorts, especially base-emitter. If non of these ideas work, I would offer to buy your non working unit if you decide to get rid of it.
Posted on Jun 30, 2009
Tips for a great answer:
Nov 29, 2016 | Bose Audio Players & Recorders
Sep 23, 2016 | GE Refrigerators
Apr 14, 2016 | Bose Wave Radio
Dec 10, 2013 | Sharper Image SI785 Clock Radio
May 24, 2012 | Bose & Wave& Music System
Sep 03, 2017 | Bose Wave Radio
Aug 18, 2009 | Bose Wave Radio
Jul 10, 2009 | Bose Wave Radio
Jun 11, 2009 | Kenmore 16602 / 16604 / 16609 Built-in...
Jul 31, 2017 | 2002 Oldsmobile Alero
241 people viewed this question
Usually answered in minutes!