Question about Pioneer AVH-P4400BH

Open Question

Avh-p4400bh buttons stoped working

Radio kept truning the volume up on it own till it was maxed out, only holding mute button would stop it. no other buttons work either on the button strip or on the HU face itslef

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2 Answers

SOURCE: Pioneer AVIC-D2

OK, I spoke to Pioneer tech support and they had me go to destination>settings>connection status. If the parking brake shows "off", many of the functions will not work as a safety measure. I guess this is their version of interlock. I think it can be defeated with a wire-around, but thats what they say the problem is.

Posted on Jan 04, 2008

Ad
hogan doan

hogan doan

  • 227 Answers

SOURCE: Volume Button on steering wheel not responsive!

There is a metal dome under each button, some time they became warped or inverted and you don't get the actuating contact on the first push but if you keep on pressing it eventually contact will be made and whoalaa actuation happened. If you are technical incline you can replace it with a dome of similar size of a device you no longer have use for, like a remote control, an old car stereo or telephone...ect. Goodluck.

Posted on Mar 05, 2008

Craig Sagar

  • 11 Answers

SOURCE: Can I use avh-p6500dvd radio with avh-p6600dvd brain.

hi i have the same unit but i dont need a brain for mine what is it your needing the brain for

Posted on Nov 28, 2008

Anonymous

  • 111 Answers

SOURCE: No picture on display, buttons dont work

The problem is the ribbon cable,and you right there is a recall for this model,you need to contact Pioneer at pioneerelectronics.com and they should repair it for you at no cost.

Posted on Dec 02, 2008

turbo tunes

Steve Karner

  • 26 Answers

SOURCE: No audio an Avic-n1 and Mute button display

We can fix this and all other AVIC N1 N2 N3 problems.

Please visit www.turbotunes.com for affordable AVIC repairs.

-Steve

Posted on Apr 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the station memory buttons?


Ok...go to the station you want to keep and push on button 1 and hold till either it blinks and stops or volume will mute then come back on. Then go to next station and hold "2"....on down the line

May 19, 2016 | Pioneer Audio Players & Recorders

1 Answer

Ignition off radio works, ignition on radio mutes


i would also check the mute or volume buttons on the steering wheel. spray them with a can of compressed air, hold the volume up and spray the minus and vise versa. hope this helps.

Mar 30, 2014 | 2007 Mercedes-Benz C230 Sedan

1 Answer

My pioneer avh-p5000 wont unmute. I have already pulled the faceplate off and reset it by pressing the reset button and when I turned it back on it was still muted. It doesent matter what source it is on....


  • Hello and thank you for the opportunity to assist you.

  • Are you getting any errors numbers? Any special icons on the screen? Cables hooked up properly?

  • Have you tried just turning the volume up to see if the mute removes itself? I know you press the knob to mute it but turn the volume up to increase the volume.


  • When you reset the radio did you follow these steps exactlly?

  1. Ignition off first.
  2. Then remove the front panel.
  3. Now engine on.
  4. Now press and hold the reset button for 5 seconds.
  • If your steps were different try this first. If they were the same then you need to reset the entire unit not just the processor.

  • To do a master reset the unit must loose power for a couple minutes. In other words unhook the power or remove both battery cables for two minutes and try it again. Make sure to have any codes you need handy before doing this procedure.

  • Let me know how you do with these steps. If it takes care of you please do rate and comment.

Regards,Tony

Nov 27, 2011 | Pioneer Auto Video Bypass Avh-p5000dvd...

1 Answer

AVH-P5000DVD Pioneer eject lock ???? I can`t get CD out Thank you in advance


TURN THE UNIT OFF SO THAT ITS IN DEMO MODE OR SHOWS A BLANK SCREEN. THAT PRESS AND HOLD THE EJECT BUTTON AND MUTE/VOLUME BUTTON AT THE SAME TIME. THIS SHOULD TAKE THE EJECT LOCK OFF....

Feb 22, 2010 | Pioneer AVH-P5000DVD Car DVD Player

3 Answers

All over sudden my boston horizon doesnt allowe increase the vol.


To fix: turn on unit, turn volume all the way down to 00, push and hold volume button for 10 seconds until beep then release, then turn volume all the way up to 50 (max) and push and release volume button.

May 17, 2009 | Boston Acoustics Duo-i Horizon Clock Radio

2 Answers

How do you get the Pioneer DEH-P670MP car stereo cd player off of mute?


hi there
to fix this press and hold the source button till unit turns off the source button switches from CD - radio...................once your unit powers off........press and hold the function button down till the clock appears in display you should also hear a beep when this happens.........press the function button repeatedly until the telephone feature appears now switch by pressing the skip button to ATT (Attention) once this is done press the source button to power on the pioneer unit simply turn up the volume and problem should be solved......
hope i was able to help

Feb 21, 2009 | Pioneer Premier DEH-P670MP CD Player

2 Answers

Eject lock pioneer avh-p5000


Turn it off so you see the "demo" screen or the blank "off" screen, then hold eject + volume (mute) button down for few seconds to turn the eject lock off.

Sep 29, 2008 | Car Audio & Video

2 Answers

Forgot my security code


the guy that wrote how to unlock the receiver left the most important parts out... guess dint wanna be helpful...

Bypass code for radio that our locked



Thank you for your e-mail. Put in the same number 3 times (example 1111) until it locks and then push in the mute bottom and hold it and while you hold the mute button with your other finger push in the volume control (power button) and hold both of them until a new screen comes up and then put in 122164 and hit OK and that should work.





let me break it down you do not need the remote...

first put the same number in (e.g 1111 enter this number 3 times) second after the device locks on the radio hold the mute button while holding that press in the volume nob (e.g power button) hold them both till another screen comes up and enter 122164 and press ok and your all done... this solution works on all dual indash dvd players

Feb 16, 2008 | Dual XDVD8181 Car Video Player

Not finding what you are looking for?
Pioneer AVH-P4400BH Logo

Related Topics:

705 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

xxxxxx xxx

Level 3 Expert

5013 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...