Question about Panasonic PV-DM2792 Triple Play 27 in. TV/VCR/DVD Combo

Open Question

Television screen not coming on for cable

The screen works for the playing of vhs - but will not transmit regular network or cable viewing

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to tune up dvd player


  • Plug the power cable of the Samsung VHS/DVD player into an available power outlet near the television.

Connect a set of RCA audio and video cables to the color-coded outputs on the back of your Samsung VHS/DVD player. The colors of these cables are yellow (video), white (left audio) and red (right audio).

Take the other end of the RCA audio and video cables and connect them to the color-corresponding inputs on your television. When plugging in these cables, look for a label for the input, such as "Video 1" and "Audio 1." This will be important in Step 5.

Turn on the television and the Samsung VHS/DVD player.

Tune your television to the video input channel that you noted in Step 3. If you did not take note, you can also tune through your television's input channels until you find the one displaying the signal from the DVD/VCR player.

Insert a VHS tape or DVD into the Samsung player and press the "Play" button to verify that the unit is functioning properly.

Component Video

Plug the power cable of the Samsung VHS/DVD player into an available power outlet near the television.

Connect a set of component video cables to the color-coded outputs on the back of your Samsung VHS/DVD player. These cables will look similar to composite audio and video cables, but they are instead color-coded as red, blue and green.

Plug the other end of the component video cables into the color-corresponding inputs on your television. Take note of what input number you are plugging the cords into, as it will be useful later.

Connect a set of RCA audio cables to "Audio Out" jacks on your VHS/DVD player, then connect the other ends to your television. These cables are color-coded as red and white and must be plugged into the same input number as the component video cables.

Turn on the television and the Samsung VHS/DVD player.

Tune your television to the component video input channel where you connected the Samsung VHS/DVD player.

Insert a VHS or DVD into the Samsung player and press the "Play" button to verify that the unit is functioning properly.

Jul 10, 2012 | 2005 Toyota Caldina

1 Answer

Samsung tv series 6 650 won't play vhs


Steps to view a video tape:
1 - connect the vcr to the tv using the appropriate cable - in your case a S-VIDEO one.
2 - select the S-VIDEO as a source in the tv menu.
3 - press PLAY on the vcr's case to start playing the tape.
ROLFMAO

Jul 19, 2010 | Samsung LN46A650 46 in. LCD HDTV

1 Answer

DVD Player doesn't work on DRC6355N VCR/DVD Combo


With most dvd/vcr combo units there is separate wiring. When I use my emerson combo unit I have it wired that I have to be on different inputs on my tv to view a dvd and a vhs. On some units the vcr portion is wired via a regular cable line, while the dvd portion is wired with the yellow, red, and white component cable. Try inserting a dvd and scrolling through your tv inputs until you find the picture or check your wiring to ensure nothing has come loose. If that has no result you could try wiring it differently if possible to eliminate that as a possibility.

Jul 10, 2010 | RCA DRC6355N DVD Player/VCR

1 Answer

Insignia ns-lcd32-09 wont play VHS


Yes, that is correct you need composite (or coax) cabling to your TV. The unit cannot carry the VHS signal via component video or digital audio cabling

Feb 27, 2009 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Projected image is slightly oversized im 16 Standard Mode


The problem was with my cable providers (Knology) cable box settings. Somehow they had changed to zoom 1. I think this happened when I played a VHS tape. If this keeps happening everytime I play a tape or DVD I'll have to remember to reset the vidio on the cable box after each tape or dvd.

FLCoyote

Nov 30, 2008 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Taping


If there is no coaxial cable input on VCR, then it should work by RCA cables. Which is the Yellow , red/white cables. On the back of the VCR. Take a set of RCA cables Yellow for video, red/white for audio to the VCR output.Then do the same to the Television input. Next use the television remote to turn the TV to Video input this will allow you to view what's playing on VCR. Then take another set of RCA cables and reverse the first setup. Attached Cables to VCR input and cables to TV Output. This will allow you record what's on television. Now make sure the cable is screwed to coaxial cable input on television. This will able you to access cable programming on television, view vhs tapes, and record programming directly from television.Good Luck

Oct 12, 2008 | Televison & Video

1 Answer

Connections


Without the manual !!
1)VCR INPUT:: [Cable_antenna In] the coxial screws on from "output" of cable box or ( airwave )antenna.
2) VCR output:: connect another coxial into input of TV. You should be able to keep all the other wires connected from SONY theater system.
note:: your VCR has a switch for VCR\TV. When u have a VHS tape playing a movie & switch from VCR to TV, you will see the channel that is on the VCR not the cable box\ antenna input.
example:Cable channel is on Ch.122, & your TV must be set to Ch.3 to view cable.If your VCR is set to Ch/5 you may not see that Ch.122.You will still be able to see your VHS tape when u place the VCR\TV switch back to VCR.
I am going to share wt.u a $100,000,000.00 trick:put any ch.on cable box.Switch VCR\TV to TV,change channel ON VHS tuner.When u come to the [picture] that the cable box is on,Then that is the Ch.u can see cable ON the VHS.
U owe me!!

Jun 08, 2008 | LG 42LC2D 42 in. LCD HDTV

1 Answer

Blank Screen


Not a compete solution, but If you can view the cable box guide/listings, I'd give the cable company tech support a call.

Mar 20, 2008 | Olevia LT42HVi 42 in. LCD Television

2 Answers

The DVD will play and display, but the VHS will play but not display.


It could be that the output to TV from VHS only works through the composite cables (the red, white, yellow).

Dec 11, 2007 | Samsung DVD-V8600 DVD Player/VCR

Not finding what you are looking for?
Panasonic PV-DM2792 Triple Play 27 in. TV/VCR/DVD Combo Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

The Knight
The Knight

Level 3 Expert

76125 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...