Question about Sharp MX-2700N Color Copier

2 Answers

Maintenance require code vc - Sharp MX-2700N Color Copier

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Sharp Expert
  • 120 Answers

If you keep using worn out iron oxide color developer, it will eventually lose all its' magnetic properties and get treated just like toner. You will sandblast your drum, belts, fuser and paper paths. Get it changed, and make sure you do your SIM 25-2 mix reset or you'll wreck your new developer.

Posted on May 02, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 3 Answers

The VC code on a sharp mx-2700 is the cyan developer has reached its maintenance cycle of 60,000 copies. to clear this code enter sim mode #, *, C, * then 24-5 to clear dv count.

Posted on Feb 28, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why customer can't add new VC-4 in VCTRUNK on EGS4 board, during board configuration limitation?


We check all customers configuration steps, and find that in VCTRUNK#3 in which they add new VC-4 #7 on EGS4 already have several VC-4s #11,13,15,16.
From product manual we know that "VC-4/VC-3 binding: VC-4s are divided into two areas, namely,VC-4-1 to VC-4-8 and VC-4-9 to VC-4-16. the VC-4s/VC-3s in these two areas cannot be bound at one time."
So we ask customer use VC-4s from different areas then they add it in VCTRUNK.

Nov 14, 2017 | Computers & Internet

1 Answer

Sharp MX-2300N Maintenance Required: Code VC


Time for some scheduled maintenance! Call a local sharp dealer.

google sharp service locator, enter your model and your zip code to find a dealer near you.


Copier Collin Houston TX Copier and Imaging Expert

Jul 11, 2014 | Sharp MX-2300N Color Copier

1 Answer

Maintenance required code TA


This is a scheduled maintenance error. It can be reset, but if you see it on the screen you likely need some preventative maintenance. If you're in the Houston, TX area we'd be glad to be your servicing dealer.

Feb 24, 2014 | Sharp MX-4111N Copier w/ 36 Month Warranty

1 Answer

Vc maintenance code


cyan developer needs replaced

Feb 14, 2013 | Sharp MX-2700N Color Copier

1 Answer

Remte code number Vc-H-800


I also haver a Sharp VC-H810 and need the remote code.

Jan 09, 2011 | Sharp VC-H810U VHS VCR

1 Answer

Look to find remote and power supply for vc-c4


The VC-C4 uses a Canon WL-V5 remote control, available at B&H Photo here. They also have a power supply for the VC-C50 here. The VC-C50 is almost identical in specification to the VC-C4, it's just a newer model. The electrical power requirements are the same.

Nov 11, 2009 | Canon VC-C4 Network Camera

1 Answer

Dell Optiplex gx280 shuts down and orange power light blinks


The power supply is definitely overheating. SO if tweaking the fan doesn't help, then replace the power supply

Sep 15, 2009 | Dell OptiPlex GX280 PC Desktop

1 Answer

What does the error code VC/VH trip mean on a Bryant out door hp cond.


vC/vh Trip or code 6. The start cap and or the start relay is bleeding voltage to the comp in the off cycle. Replace both the cap and relay for the fix.

Jul 09, 2009 | Bryant Heating & Cooling

2 Answers

Sharp MX-2300N Maintenance required.code:TA


Maintenance TA is indicating the machine has reached its 100K scheduled service interval. It requires Transfer Belt Unit, Usually Black Drum & Developer, any feed rollers wornout replaced, any old firmware updated to latest version, and a general clean & check. It is reset in service mode once these parts are replaced.

Dec 23, 2008 | Sharp MX-2300N Color Copier

Not finding what you are looking for?
Sharp MX-2700N Color Copier Logo

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...