Question about Hobart N50 Stand Mixer

1 Answer

Hobart N-50 Mixer beater attachment spins but has no resistance

This mixer turns on fine and the beater attachment spins but will not spin or mix when dough etc... are placed inside the bowl. Is this a transmission problem? Or a shaft bearing? Can someone please help me diagnose the problem. Is this an easy fix?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Sounds like the shear pin on the planetary shaft has sheared off. Has the mixer been subjected to a heavy load. Remove the planetary and see if the shear pin is intact otherwise you may have to open up the transmission.

Ron

Posted on Jun 10, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

60 qt Hobart mixer H600T makes buzzing noise and won't spin. The hook seems blocked, can't spin it manually. Opened the top part and everything seems fine. What can it be and how to fix it? Thank you


call in an electrician as it may be the start/run capacitor for the motor ( indicated by motor humming but not running)
the gearing will make it very difficult to turn the blades by hand as the motor will be spinning at either 1400 rpms or 2400 rpms down to around 50 rpms for the blades

Jun 30, 2016 | Hobart Food Mixers

1 Answer

How much oil does my H 600 Mixer hold ( Hobart in the Transmission


1 gallon of 90w Gear Oil -- can be purchased from AUTOZONE! Make sure when you have completely drained from the large drain screw from under the mixer toward the back of where the attachments go on but not part of the part that spins around known as the Beater shaft! Once you have drained out all of the oil -- from the top where the front screw attaches the head or cap of the mixer -- add the oil there and make sure you are watching the sight glass to see when it is at the HALF way mark in other words when the oil level (TIP: Use a bright led flashlight to shine directly at this sight glass to view level) reaches to the midway mark of the oval sight glass, THEN STOP! It is full! Carefully start mixer on 1st gear and then 2nd so on and so forth to make sure everything is getting relubricated correctly and slowly -- don't just go setting it on 3rd or 4th speeds as you want to baby the mixer when you just put in new gear oil

Hope that helps!

Jun 12, 2014 | Hobart H600 Stand Mixer

1 Answer

Dc-sm168


Hello, Go here for beaters for your mixer: Hobart Mixer Parts Hobart Mixer A200

Jun 02, 2014 | Hobart A200 Stand Mixer

1 Answer

Black and Decker Spatula Smart Hand Mixer


1990? Dump it and purchase a new one

Mar 17, 2017 | Food Mixers

1 Answer

What is the best stand mixer to buy for home use? My 4 yr. old Sunbeam Heritage Series 450 watt Mix Master has stripped beater gears. Before that it wouldn't tilt back because of a loose screw. I don't...


the best stand mixer is a hobart n 50 its a little expensive, but if you use your mixer all the time, its worth the investment, buy 6 to 8 sunbeams, or kitchenaids, to 1HOBART N 50. metalgears in transmission, and in planetary,all the others have nylon gears

Jan 16, 2010 | Sunbeam 2351 Legacy Stand Mixer

1 Answer

Have a sunbeam heritage stand mixer model 2346-000.


Make sure the bowl is off to the side. I wouldn't get rid of a mixer just because the bowl doest't, if it's a good powerful mixer. There aren't many replacement parts available except directly from sunbeam. You need to get a replacement motor for the bowl turntable.

Jan 08, 2009 | Sunbeam Heritage 2346 Stand Mixer

1 Answer

Mixer runs, but will not turn beater.


You are correct, in the mixer head above the attachment hub is a gearbox, and there is a fiber gear meant to do just that should something similar happen, it can be replaced, I don't know price, but if you are careful, and fair mechanically, it is a straight forward replacement.

Dec 30, 2008 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Mixer beaters clanging together


The beaters might be fixable/replaceable but the bowl not spinning anymore is the more serious of the 2 problems. If this is several years old iit probably is more cost efective/simpler to replace the whole unit.

Good luck Loringh

Nov 08, 2008 | Sunbeam Heritage 2346 Stand Mixer

Not finding what you are looking for?
Hobart N50 Stand Mixer Logo

Related Topics:

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1361 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...