Question about Canon PIXMA MP810 All-In-One InkJet Printer

Open Question

Fault in starting after many years

When start up 1- green light comes on. 2- yellow light comes on. 3- screen is fuzzy (like a tely off channell) first time it append no lights. then later it lit up with error code ? now as above screen lights up with nothing showing(only fuzzy screen) Harold Hill e-mail hh@mypostoffice.co.uk

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Canon Pixma MP150 Error code E 42

Had exact same problem. Scanner light should come on at power up. Found ribbon cable connecting scanner unit to base had come unplugged from socket on circuit board. The ribbon cable is one of three found near back hinge of scanner and is hidden underneath the other two. It should drape over the edge of circuit board and then plug into small recepticle on inner side of board. I plugged it in and printer works again. Hope this helps.

Posted on Mar 11, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: error code 5010

Yes, same thing happens to me...Error code 5010...and flashing green and orange...alternating lights.

I was trying to photocopy (in basic black, not colour). I had a few pages to copy. I got this 5010 Error code after EACH copy!

I had to turn off the printer after each copy and then turn it back on for the next copy. That's not the worse of it.....once I turned the printer back on and hit copy again...the printer took a VERY long time to scan the item for the next copy. It took me a good 40 minutes to copy 15 pages.
Sooooo irritating!!!!!

Anyone know what to do?

I've also had the paper jam on me tons of times. I am really disappointed with this product. I would not recommend this printer to anyone!

Posted on Aug 21, 2008

Anonymous

  • 1 Answer

SOURCE: CANON IP 1880

i need install canon ip1880.. how?

Posted on Oct 05, 2008

Anonymous

  • 1 Answer

SOURCE: CANON MP510 NOT WORKING

please..give me information.how to reset my printer MP510

Posted on Jul 15, 2009

pineworks

Clive

  • 4345 Answers

SOURCE: Current Problem on Printer """E5"""

This error means waste ink counter is full.

Solution:
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Press resume

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The tv gets really fuzzy and changes color after watching it, but i think it has something to do with the wire ports because if i hit menu while its all fuzzy, and when the menu comes up it looks normal,...


check cable connections:
1. cable from wall to tv or to pvr. properly connected?
2. yellow,red and white in correct ports?
3. if HD, use green, blue and red to respective ports.
4. is remote properly sync to tv?
5. if no 3 above, get HDMI cable and connect to pvr.

Aug 12, 2013 | Westinghouse LTV-32w3 HD Television

1 Answer

I just replaced the batteries in my Jazzy 1170 PLUS. Now my speed control lights blink constantly and the chair is totally unresponsive.I have double checked to be sure the freewheel levers are totally...


According to my 1170 manual the flashing lights are error codes. 1 red = low batt., 2 red = left motor disconnected, 3 red = Left motor wiring fault, 4 yellow = Right motor disconnected, 5 yellow = right motor wiring fault, 6 yellow = Inhibit active, 7 yellow =possible joystick fault, 8 green = possible controller fault, 9 green = Solenoid brake fault, 10 green = high batt. voltage

Feb 13, 2011 | Pride Mobility Products Jazzy 1170 XL Plus

1 Answer

Playstation 3 (PS3) Console: Whe i touch the red startup button it beeps and tu...


you got a YLOD yellow light of death when you get a yellow light briefly and then the red lights start blinking, you need to reflux the solder on the processors and apply heat to them, here is a link on how to do the repair, if you are not good at doing these kind of work, I would suggest taking it to a pro.
http://www.youtube.com/watch?v=XIm0Qk0CVTE&feature=related

May 17, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Start up fault for playstation 3


This is yellow light of death, your ps3 is broke call sony for info on repair

Apr 12, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

My XBOX 360 is green and fuzzy, if you reset the game it will work for a little while fine but then goes back to the green fuzzy screen.


It's starting . The G.P.U is breaking away from
the main P.C. board . It will get worse with time.
You have three options

1 Send it to Microsoft ,wait 2-3 weeks and keep
your fingerd crossed.

2 do and x clamp mod on it this will get it
back to normal for 1-3 mounths.

3 Have a shop re-flow the G.P.U. back to
the board this is the most durable repair
cost will very 70.00-80.00 the 35.00 fix
is some else doing and xclamp mod that
you could have done yourself.

If you need more info just ask.

Rob

Nov 28, 2009 | Microsoft Xbox 360 Console

1 Answer

Horizontal flashing color stripes.1/2 second intervals on pic


If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

Nov 07, 2017 | LG 42PG20 42 in. Plasma HDTV

1 Answer

Screen gone yellow and green


I have a 21'' NEC TV Screen and it about 3 year old. the colour has gone to yellow and green color and the red etc

May 10, 2009 | Samsung PPM42S3 42 in. Plasma Television

1 Answer

Samsung aircon cuts off. lights green/yellow flashing


lg air cond.multi split led lamp blink power 1 times,good sleep 2 times

Feb 11, 2009 | Heating & Cooling

1 Answer

Green lights on start up


You should have 3 green 2 yellow and 1 red.This is your maintenance indicator. When the 1 (last) green light goes out and a yellow light comes on its time for a service. The shop will reset the lights for you after the service is completed. If you do the service yourself and like to work on your own car you can buy a service light reset tool here. http://www.eurosportdesign.com/c-5-reset-tools.aspx?gclid=CPnumom1_pcCFRKLDQodkTwFDQ The R5B tool is the one you will need. It's on sale right now.

Jan 08, 2009 | 1999 BMW Z3

Not finding what you are looking for?
Canon PIXMA  MP810 All-In-One InkJet Printer Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2260 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...