Question about Dual Slide Controller 13398-c2 Motor Synchronous Velocity Ids Inc

Open Question

It keeps beeping when I opened the slides partly. There was no room to open completely. The controller is on a Redwood fifth wheel.

Do I need to reset the controller somehow?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 Fleetwood Terry 27 ft fifth wheel with one slideout. Having trouble with slideout coming in.


Replace the hydraulic pressure block. I would also look at the slides for the room extension. Made out of hard plastic.

Jun 25, 2016 | Cars & Trucks

1 Answer

What does the inner slide-out seal on a 1999 Damon challenger fifth wheel travel trailer look like?


How To Maintain RV Slide-Out Seals - YouTube

? 4:02
www.youtube.com/watch?v=X701hbSO_ko
Mar 25, 2012 - Uploaded by RVgeeks RV slide-out rooms have both inner and outer seals (I also refer to them as gaskets, but seals is probably ...

Slide-Out Seals - Factory RV Surplus

www.factoryrvsurplus.com > Repair Parts
#484 2.875" Black Single Wiper SealThis Slide-Out Seal Features EK Track, and is currently being ... ED50470 Slide Out Sweep W/Trim LockSold By The Foot

Nov 05, 2015 | 1996 Yamaha Royal Star XVZ 1300 A

1 Answer

How do i reset an ipod


Step 1:
There are many iPods each having there own specific method of restore them WHAT MODEL ? The iPod A1136 is the fifth generation iPod from Apple that uses a click wheel to scroll through your device's media library, and may occasionally lock up when you attempt to play a song or display a photo. This error error occurs when the hard disk is unable to access the information and stalls while opening a file. A reset of the device usually corrects the problem, as it clears the device's memory and any errors. Check your iPod's buttons to determine if the cause is due to a hardware error before resetting the device, as the problem may be due to the iPod's hold switch. Slide the hold switch at the top of the iPod to the right, and slide it back to the left to ensure the switch is in the off position. Hold down the center button in the click wheel, and at the same time hold down "Menu" on the click wheel. Continue to hold the iPod's buttons until the device's screen shuts off, turns back on and shows the Apple logo. Plug the iPod's connector cable into the dock connector on the bottom of the iPod. Plug the other end of the cable into your computer's USB or FireWire port to charge the iPod. Wait at least two hours for the iPod to charge. Launch iTunes on the computer, and click "Controls" of the iTunes menu. Click "Eject iPod" in the sub-menu to disconnect the device. The iPod takes four hours to completely charge its battery.

Feb 17, 2013 | Apple iPod Audio Players & Recorders

1 Answer

REBOOT IPOD


which model ipod they all have different ways to reset usually through iTunes


The iPod A1136 is the fifth generation iPod from Apple that uses a click wheel to scroll through your device's media library, and may occasionally lock up when you attempt to play a song or display a photo. This error error occurs when the hard disk is unable to access the information and stalls while opening a file. A reset of the device usually corrects the problem, as it clears the device's memory and any errors. Check your iPod's buttons to determine if the cause is due to a hardware error before resetting the device, as the problem may be due to the iPod's hold switch. Slide the hold switch at the top of the iPod to the right, and slide it back to the left to ensure the switch is in the off position. Hold down the center button in the click wheel, and at the same time hold down "Menu" on the click wheel. Continue to hold the iPod's buttons until the device's screen shuts off, turns back on and shows the Apple logo. Plug the iPod's connector cable into the dock connector on the bottom of the iPod. Plug the other end of the cable into your computer's USB or FireWire port to charge the iPod. Wait at least two hours for the iPod to charge. Launch iTunes on the computer, and click "Controls" of the iTunes menu. Click "Eject iPod" in the sub-menu to disconnect the device. The iPod takes four hours to completely charge its battery.
Hope this helps.

Jan 20, 2013 | Apple iPod Audio Players & Recorders

1 Answer

HOW TO UNLOK THE A1136 IPOD


click start control panel scroll to folder options tick in the box to show hidden files and holders

connect your Ipod to your computer


click start click click on you Ipod to open


then go Ipod controls device there should be a folder saying locked

right click select rename to open or delete the folder your Ipod should now be open

or you might do a factory reset

The iPod A1136 is the fifth generation iPod from Apple that uses a click wheel to scroll through your device's media library, and may occasionally lock up when you attempt to play a song or display a photo.


This error error occurs when the hard disk is unable to access the information and stalls while opening a file.


A reset of the device usually corrects the problem, as it clears the device's memory and any errors.


Check your iPod's buttons to determine if the cause is due to a hardware error before resetting the device, as the problem may be due to the iPod's hold switch.


Slide the hold switch at the top of the iPod to the right, and slide it back to the left to ensure the switch is in the off position.


Hold down the center button in the click wheel, and at the same time hold down "Menu" on the click wheel.


Continue to hold the iPod's buttons until the device's screen shuts off, turns back on and shows the Apple logo.


Plug the iPod's connector cable into the dock connector on the bottom of the iPod.

Plug the other end of the cable into your computer's USB or FireWire port to charge the iPod.


Wait at least two hours for the iPod to charge. Launch iTunes on the computer, and click "Controls" of the iTunes menu.


Click "Eject iPod" in the sub-menu to disconnect the device.

The iPod takes four hours to completely charge its battery.


hope this helps



Oct 18, 2012 | Apple Ipod Video 5.5 Gen Black 30gb Mp3...

1 Answer

HOW TO UNLOK THE A1136 IPOD


click start control panel scroll to folder options tick in the box to show hidden files and holders

connect your Ipod to your computer


click start click click on you Ipod to open


then go Ipod controls device there should be a folder saying locked

right click select rename to open or delete the folder your Ipod should now be open


or you might do a factory reset

The iPod A1136 is the fifth generation iPod from Apple that uses a click wheel to scroll through your device's media library, and may occasionally lock up when you attempt to play a song or display a photo.


This error error occurs when the hard disk is unable to access the information and stalls while opening a file.


A reset of the device usually corrects the problem, as it clears the device's memory and any errors.


Check your iPod's buttons to determine if the cause is due to a hardware error before resetting the device, as the problem may be due to the iPod's hold switch.


Slide the hold switch at the top of the iPod to the right, and slide it back to the left to ensure the switch is in the off position.


Hold down the center button in the click wheel, and at the same time hold down "Menu" on the click wheel.


Continue to hold the iPod's buttons until the device's screen shuts off, turns back on and shows the Apple logo.


Plug the iPod's connector cable into the dock connector on the bottom of the iPod.

Plug the other end of the cable into your computer's USB or FireWire port to charge the iPod.


Wait at least two hours for the iPod to charge. Launch iTunes on the computer, and click "Controls" of the iTunes menu.


Click "Eject iPod" in the sub-menu to disconnect the device.

The iPod takes four hours to completely charge its battery.


hope this helps



Oct 18, 2012 | Apple iPod MA446LL/A MP3 Player

1 Answer

How to reset automatic sliding door on chevy venture van


The rear side door actuator control modules monitor the power sliding door positions at all times. Whenever the battery positive voltage supply to a rear side door actuator control module has been removed or the on-board diagnostics have been activated the power sliding door system(s) must be re-initialized. Re-initialize the right or left power sliding door systems using the following steps:
  1. Turn the ON/OFF switch for the power sliding door system to be re-initialized to the OFF position.
  2. Manually open the power sliding door completely.
  3. Manually close and latch the power sliding door.
  4. Turn the power sliding door ON/OFF switch to the ON position.
  5. Open the power sliding door completely using the B-pillar or overhead console OPEN/CLOSE switch.
  6. Close the power sliding door completely using the B-pillar or overhead console OPEN/CLOSE switch.

Sep 30, 2012 | Chevrolet Vehicle Parts & Accessories

1 Answer

Stove controls beeping and flashing "Probe"


Most likely oven sensor / probe is the problem. It can be tested with an ohm meter. Not sure about your model, but most should read around 1100 ohms at room temperature. If there's a tech sheet somewhere on your unit, it should tell you.

Sep 23, 2017 | Jenn-Air SCE30600 Slide-In Electric...

Not finding what you are looking for?
Dual Slide Controller 13398-c2 Motor Synchronous Velocity Ids Inc Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dual Video Game Consoles & Games Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18084 Answers

Are you a Dual Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...