Question about Pioneer PDP-4350HD 43 in. Plasma Television

Open Question

I have a Pioneer Plasma TV, PDP-4350SX. The power light is on, but no picture or audio

I just moved it to another room and different HD DVR. All connections are tight, DVR is powered, can change channels with its remote, but no picture or audio on TV.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 225 Answers

SOURCE: Can't turn on from Stanby mode

I would assume the power board has a problem. A tech could possibly repair it without replacing the whole board.

Posted on Nov 14, 2008

Ad
tvservice306
  • 458 Answers

SOURCE: Pioneer PDP-RX06XE has no picture

check PDP 436XPE UNIT may be Y board short...or need factory restore to the original state....

Posted on Nov 18, 2009

  • 4 Answers

SOURCE: Will the Pioneer PDP-R03E Plasma TV Media box work

Yes it will

Posted on Jan 14, 2010

  • 1 Answer

SOURCE: Pioneer Plasma TV-PDP-4270HD won't turn on. TV

Try this! There should be a power button on the bottom of the panel that has to be depressed for the television to power on. It is the main power supply button and without it there is no power going into the TV.

Posted on May 11, 2010

SOURCE: I have a Pioneer PDP-R05G

This is a classic "Hic-upping" switchmode power supply problem. The protection circuitry inside the SMPSU, has sensed a severe potential problem, and is attempting the shutting of the set, down to avoid a fire, explosion, or both.
This set had developed a problem, that is so severe that the set must be shut down, (This set should be removed from the Power),
What is happening is the internal "Fault" that is causing the Protection Circuitry , to detect the problem and attempt to shut down the set, keeps restarting the set, because as soon as it shuts down, the "Faulty" component(s) cool down?, and the "Fault" ostensibly "Clears" so the PSU starts up again, only for the component(s) to heat up, whatever, again and fail, so it shuts down, and if left unattended, this would continue on until the part eventually failed. As related this is called a "Hic-upping Power Supply". Any fault that involves the power supply is usually quite serious, and needs a professional, usually, unless one is familiar with servicing current day, televisions.
And in my professional recommendation, you should get a "Quote" for repair, from, an, Approved Service Center. Now, this point is very important for a good result, Always contact, their "Local" or a, "Head Office" Philips in your case. Ask them, for a referral to an authorised servicing center, where you ask for a "Quote". Now, when you get the information you want, then you can decide as to repair of replacement.
The reason we want an approved agent, is that way, all the engineers are trained on their own brand sets, they have seen almost all faults, and will get the job done quicker, and for less cost, and usually have parts on hand, also sometimes, there has been a service bulletin in issued and the repair may be subsided or even free. There are many, many, many reasons that display this symptom, one must work through the troubleshooting steps to isolate and identify, the Cause and repair that and any damage done.
http://www.pioneer.owner-manuals.com/PDP4360HD-service-manual-PIONEER.html
service manual link above,
as an aside here, sometimes things in storage can quickly degrade especially big low value capacitors, these increase in internal resistance, and all sorts of problems ensue, this is why, say, military things are cycled at least weekly when in "Moth balls" to prevent exactly this.

Posted on Mar 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stand by light flashing no picture or sound pioneer plasma 5060 hd


This is a protection error indication and the TV needs attention by a qualified service technician.

Jul 14, 2012 | Pioneer PDP-5060HD 50 in. Plasma...

1 Answer

Hello my name is joe, i have a pioneer plasma model PDP-4350SX. MFD:6/2005. friday nite i was watching tv and a loud snap came from the set and then shut off. at first i would attempt to turn on and it...


yes, the chip on the x sus or y sus board popped oven. That snap you heard is electricity arching over the dislodged chip. Common for plasmas. Call Pioneer because they may still cover it. Some manufacturers are covering it til Sept 2010.

Aug 10, 2010 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Pioneer Plasma TV-PDP-4270HD won't turn on. TV


Try this! There should be a power button on the bottom of the panel that has to be depressed for the television to power on. It is the main power supply button and without it there is no power going into the TV.

Mar 16, 2010 | Pioneer PDP-4270HD 42 in. Plasma...

1 Answer

Pioneer PDP435PG inadvertently reprogrammed by Casablanca remote.


Some ceiling fans have jumpers that can be moved to select a different frequency but you have to be sure both the remote and the fan receiver are set the same. Other than that, you may have to use some creative control. For example, I can turn on my TV by pointing the remote at the wall opposite the TV

Mar 29, 2017 | Pioneer PDP-4350HD 43 in. Plasma...

1 Answer

Green blnking light on pioneer plasma - Picture does not come on


You can try a hard reset : Unplug TV from AC mains and remove all cables from TV. Wait about 30 minutes and replug to AC power and redo the cabling. Switch on the TV and see if it works..


Good luck..

Nov 23, 2008 | Pioneer PureVision PDP-5030HD 50 in....

2 Answers

Supply board


Hi,

The power supply board for this model can be found in the link below.

Buy PDP-5030HD Power Supply Board

Mar 20, 2008 | Pioneer PureVision PDP-5030HD 50 in....

Not finding what you are looking for?
Pioneer PDP-4350HD 43 in. Plasma Television Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76115 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...