Question about Sharp Wizard OZ-730

Open Question

Would not turn on

Put new batteries in and it still would not come on. No light, no anything.

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My battery and brake waring light came on so i put a new battery in but the lights wont go out .how do you clear them.i have a 2007 nissan murano


The battery light doesn't mean you need a new battery it means that the battery charging system is faulty, that is the alternator and the voltage regulator, the lights are on because the system voltage is low, they will not turn off until the charging system problem is diagnosed and repaired.

Jul 06, 2017 | 2007 Nissan Murano SE

1 Answer

New battery, new solenoid.... turn key display lights come on but will not ignite. Do not get a click or anything.


Sounds like your new battery was not charged when it was sold to you. Put it on a 12 volt charger for 6 hours.

Feb 06, 2016 | Polaris 2004 Sportsman 700 Twin

1 Answer

I put the key in the ignition and turn and nothing lights up, no sound, its like it has no electricity. What could this be??


Check your fuses, and make sure your battery terminals will not move if you try to turn side to side and up or down with your hand. If

Sep 19, 2015 | 1984 Volvo DL

1 Answer

I have been charging my nextbook 10.1 all night and it wont turn on. Why?


the battery is sucking up all the power because of an internal battery failure. put in a new battery any you should be fine.

Dec 17, 2014 | Computers & Internet

1 Answer

After changing out the gear shift assembly on my 04 type x I found out my battery w as dead. I tried jumping it off and when I turned the key lights alarm and door locks worked but it didn't even try


I have 04 x type car turns on I put it on gear and a cranky noice and the car dont move crank gets more loud if I try put it back on park it grinds loud so I have to turn off the car just to put it on park

Jul 29, 2017 | 2004 Jaguar X-Type

1 Answer

V star 650 new battery but no power


Take a look at the start solenoid ...

Mar 21, 2013 | Yamaha Motorcycles

2 Answers

MY R2D2 INTERACTIVE ASTROMECH DROID WONT MOVE OR DO ANYTHING


On the front of the droid there is a red button that lights up when turned on & turns off after a couple of seconds, depress that button to free up the droid. Its called the wheel lock control button. That should free up your R2

Apr 15, 2012 | Hasbro Star Wars R2 D2 Interactive...

1 Answer

I put a new battery in my hyundai sonata and now the lights inside the car wont even come on. it won't do anything. If you jump it it will start but thats it it won't start back up after you turn...


Did this occur straight after changing out the battery, or after sitting with the new battery installed?

Have you checked the new batteries voltage and voltage under load, eg. (Voltage when headlights are on) could be a flat new battery.

Or could be load on the battery after key is turned off, something draining the battery overnight like a boot or interior light, radio left on ect.

Unlikely a short, or you would be in a world of burnt wires from the battery cables.

Feb 26, 2018 | Hyundai Motor 2003 Sonata

1 Answer

My 2007 GMC Yukon will not start in cold weather. When I turn the key over the lights/dash controls come on, but the engine does not turn over at all. Nothing. Put a new battery in and still does it. ...


My 2007 GMC Yukon will not start in cold weather. When I turn the key over the lights/dash controls come on, but the engine does not turn over at all. Nothing. Put a new battery in and still does it. It is a random occurance. Would not start for two days this week so I had it towed to the dealership and the next morning it starts without the service dept doing anything??? Bring it home and two days later it does it again??? Any ideas?

Dec 14, 2010 | 2007 GMC Yukon

1 Answer

Wont turn on, new batteries, green light just blinks.


Make sure you are using the correct batteries, and that they are installed correctly. Some cameras require more powerful kinds of batteries and will not work with the cheaper kinds.
A blinking light can mean something is wrong with the power, not enough or something else.
If you have a power adapter or can get one, you may try that, to see if the camera will work without batteries. If it does, then some problem exists in the battery circuit.

Oct 20, 2009 | Samsung S860 Digital Camera

Not finding what you are looking for?
Sharp Wizard OZ-730 Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Computers & Internet Experts

Jason Harris
Jason Harris

Level 2 Expert

274 Answers

Ekse

Level 3 Expert

13434 Answers

Siul Oyaratgam

Level 2 Expert

317 Answers

Are you a Sharp Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...