Question about DISH Network Televison & Video

1 Answer

When our DISHTV receiver loading is appears and it continues and nothing on screen

Posted by Anonymous on

Ad

1 Answer

  • Official Brand Answer
  • 184 Answers

Hi there! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you. Please reset the receiver by unplugging it from the wall for 10 seconds. After 10 seconds please plug the receiver back in, allow it to power back on by itself, it will acquire signal and download the guide. If issue persists and you currently have the receiver's power cord connected to a surge protector, please by pass the surge protector and connect the cord directly to a wall outlet. If issue persists after performing this steps please email me at: kimberly.escobar@dish.com for further assistance. You can also contact us directly at: 1800-333-3474.

Kimberly Escobar
Social Media Representative
DISH L.L.C

Posted on Mar 18, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to calibrate my Garmin Nuvi 1260T. It's been alittle off ever since I got it. I tried holding the power button for 30 seconds and waiting until the calibration screen pops up but nothing pops up. ...


In order to calibrate the screen on the Nuvi 1260T, you need to follow these few simple steps.

- Turn off the device
- Hold the upper-left corner of the screen while turning on the device
- Release the power button when the Garmin screen appears
- Continue to hold the upper-left corner of the touch screen for 30 seconds until a white screen with "Press dot" appears.

This should allow you to calibrate the screen. I hope this helps!

Mar 01, 2011 | Garmin nvi 1260T 35 in Car GPS Receiver

1 Answer

I continully receive a message of the screen is not in optimal mode of 1920X1080. I have gone to the screen setttings and have applied this yet I continue to receive the message when I go to play a game....


Your game does not natively run at the same resolution as Windows. Check the video/graphics settings in the game itself to adjust the resolution to 1920x1080.
Note that increasing the resolution to this, will drastically increase the load on your graphic card.

Feb 26, 2011 | Samsung SyncMaster 2233SW Monitor

1 Answer

Message not send to dishtv in my registerd cell phone my mo.is 9494717190


Hi

if message is not going than try this free Nos.

Customer care number 0120-2550000 (All phone lines),
1860-180-3474 (Only BSNL/MTNL lines),

or

SMS dishtv to 57575
To get a call back from dishtv

thanks

Jan 03, 2011 | Computers & Internet

1 Answer

Screen display mode


Because the broadcaster is giving you the bars at top and bottom there is nothing you can do except use the different aspect or screen formats that are on your TV. Please take a few moments to rate my answer. Thanks....

Nov 20, 2009 | Televison & Video

2 Answers

It doesn't come on anymore


I had the same thing happen with my vip622 dvr, the fan ran constantly and the green light would flash...and no picture...well..I read through some things..and found out to get this receiver running correctly, you have to put it on a stand alone shelf with nothing on or around it..a milk crate underneath the table I have my TV on seems to have worked..for some reason this box can not be in an enclosed area...at all...having it sit all alone seems to be the only solution...I had to get a new HDMI cable to make it reach...but things seem to be fine now...(cross the fingers)!

Feb 28, 2009 | DISH Network ViP622 DVR DTV Receiver /...

5 Answers

Universal remote code for Zenega receiver


Zenega DishTV STB CD-1004is SRU 5130 Philips Universal Remote.
If you have bought the above universal remote and didn't know the code for your Zenega STB, use the manufacturer code for HANDAN which is 1184

Oct 27, 2008 | GE JASRM24912 Remote Control

1 Answer

Dish Network VIP612 DVR - unwanted "Info" screen


The problem has nothing to do with the television. To fix it, simply change the remote address. The directions for this are in the Dish manual, or you can check it out on the website here: http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/receiver/622.shtml

Hope this helps.

Oct 18, 2008 | Kenwood RC-R0720 Remote Control

1 Answer

New channels


the best thing to do is to call and ask your provider, they will have a form they can fill out for you to request specific programming, most pay-te;ecision companies are primarily occupied with acquiring high definition programming at this time though

Jun 16, 2008 | DISH Network DVR-625 DTV Receiver /...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...