Question about Brother MFC-7820N Laser Printer

Open Question

DRUM END SOON mfc7860dw

Just says drum end soon and I would like to reset the drum.... How

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 624 Answers

SOURCE: How do I reset the Change Drum Soon on the display?

All you should have to do is: -replace the old drum with the new replacement. -with the front door open press the Clear/Back button -press the number 1 button and when ?accepted? appears on the LCD close the front cover. That should do it. Let us know if you have any other questions and please don?t forget to rate this post.

Posted on Mar 01, 2007

Ad
  • 1684 Answers

SOURCE: my hl 4040cn says drum ends soon. do I have to

Hello,

Yes, The drum units have a set number of copies before they need to be replaced. This printer has a drum life of 17000 pages. The part number for the drum is DR110CL Just do a Google search or check your local office supply store.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com


Posted on Jan 05, 2010

  • 150 Answers

SOURCE: drum en soon MFC 7340

The drum counter counts to 15000 then says replace drum soon. Just open the front door and press options. Select yes.

Posted on Feb 04, 2010

  • 73 Answers

SOURCE: I have on my Brother HL-4040cn, drum end soon.

Here is a photo of the drum unit and a link to the Brother website for you printer.
http://www.brother-usa.com/support/default.aspx?PGID=1&R3ModelID=HL4040CNaefb82c.gif

Posted on Mar 11, 2010

Jimsta01
  • 405 Answers

SOURCE: Keeps saying drum to end soon.

You need to open the front cover ( where the drum and toner is installed), then press the clear/back button, then will ask if you replaced the drum, chose one for yes, it will says accepted, then close the cover.

Posted on Apr 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix brother printer drum error troubleshooting and routine maintenance


I still receive the error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one. The following error messages will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.
  • Replace Drum
  • Drum End Soon
  • Drum Near End
  • Drum Stop
To clear these error messages, you need to reset the drum counter as instructed below.

If you want to clear an error message related to the toner replacement, click here to see how to clear an error message after you replaced the toner cartridge.
"What is the difference between the toner cartridge and the drum unit?"

Please reset the drum counter only when you replace the drum unit. If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.
  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press Clear or Clear/Back on the control panel.?
    NOTE: The layout of a control panel differs depending on the model, but the Clear or Clear/Back button is located on the right side of the LCD screen as shown in illustration.
  4. Do one of the following.

    • If your Brother machine has a numeric keypad:
      Press 1 to reset the drum counter.
    • If your Brother machine doesn't have a numeric keypad:
      Press the Up Arrow Key to reset the drum counter.
  5. When the LCD shows Accepted, close the front cover.

frontcover1-y4i03b33115mpu3ejihwhjwc-5-0.gif

controlpanel1-y4i03b33115mpu3ejihwhjwc-5-2.gif

Sep 11, 2017 | Brother Office Equipment & Supplies

1 Answer

Drum end soon again


My MFC-7420 began to display the message "Drum end soon" so I quickly went out and purchased a new drum. But I decided not to install it until I needed to. Because what does "drum end soon" mean? I thought it would mean that the print quality would deteriorate enough that I would notice the problem. So I continued to replace toner as needed, and pushed the blue cleaning thing down the wire regularly. This went on for over 3 years until *finally* I started having regular print job production problems. I replaced the drum, and the problems were solved. So,my advice is be prepared, but don't replace the drum until you have to -- the message means very little.

Mar 18, 2014 | Brother MFC-7340 All-In-One Laser Printer

2 Answers

How do i reset ricoh sp 1200s drum unit


why toner life end message keep on showing on sp 1200s prints.

Aug 04, 2012 | Ricoh Office Equipment & Supplies

1 Answer

I still receive the error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one.


did you do the reset procedure? if not it's in your owners manual under the section "replacing the consumables".
hth,
razors

Nov 29, 2011 | Brother HL 5250DN Laser Printer

1 Answer

What does drum end soon mean? Status monitor for my brother MFC-944)CN printer is saying Drum end soon! the file is being sent the status says ready, the paper goes through and comes out blank!


1. replace drum unit
2. after replacing reset the counter - press "3" and "9" button at the same time in the ready state, the reset menu will appear on the LCD, select "DRUM" and press "ok"
resetting without actual drum replacement might damage your printer.

Jun 29, 2010 | Brother MFC-9440CN Laser Printer

1 Answer

I recently noticed a message that said "drum end soon" on the screen portion of my printer. With that I went and replaced the drum and toner. The problem is this: The "drum end soon" message never quit...


Hi,

This message would continue to appear if the drum unit counter was not reset when you installed a new drum.
To reset the drum unit counter, follow the instructions below:
  • Press Menu on the Control Panel.

  • Press the Up or Down Arrow key to select Machine Info..

  • Press OK.

  • Press the Up or Down Arrow key to select Reset Menu.

  • Press OK.

  • Press the Up or Down Arrow key to select Drum.

  • Press OK.

  • Press 1 to reset the drum unit counter.

Thank you !!

Jun 09, 2010 | Brother MFC 7840W Printer

1 Answer

Drum end soon, what does that mean


It means that the drum will end soon. The drum is the piece that holds the printer cartridge. It costs about 115+ dollars at the store, but on ebay, you can get it for a good 60 bucks. :)

May 26, 2010 | Brother MFC-7440N Laser Printer

1 Answer

Drum End Soon


You will soon need to replace the drum. Its considered a consumable just like the toner cartridges. You can purchase the drum anywhere that sells brother pruducts.

May 24, 2010 | Brother HL4040CN Laser Printer

2 Answers

Drum en soon MFC 7340


The drum counter counts to 15000 then says replace drum soon. Just open the front door and press options. Select yes.

Feb 03, 2010 | Brother MFC 7420 All-In-One Laser Printer

Not finding what you are looking for?
Brother MFC-7820N Laser Printer Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers

ctnozil

Level 2 Expert

270 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...