Question about HP Photosmart 3310 Printer

5 Answers

HP 3310 All In One Error

My HP 3310 is coming up with the following error:

Ink system has failed, unable to copy, receive faxes or print. Refer to printer documentations.
Error: 0xc05d1281.

Can you pls help with what I need to do. I have tried rebooting..
Thanks,
Jenae

Posted by on

  • 1 more comment 
  • Anonymous Nov 09, 2007

    My HP 3310 is coming up with the following error:

    Ink system has failed, unable to copy, receive faxes or print. Refer to printer documentations.
    Error: 0xc05d1281.

    Can you pls help with what I need to do. I have tried 50 times wont work!

  • Anonymous Dec 18, 2007

    everything

  • Anonymous Mar 19, 2014

    The balck ink does not print. But can't get any indication if the printhead can be replaced or taken out to clean?

×

Ad

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers

Try to reset the system by holding down the OK, Cancel, Black, and Color buttons at the same time and turn the 3310 off. Keep holding the buttons down until the printer shuts off and then turns itself back on. You will have to turn the printer off twice and then it will recalibrate. Make sure you have new cartridges in the printer so that it can reset. 

Posted on Nov 01, 2007

  • santianito Oct 06, 2010

    probe todas las soluciones y no me lo resolvian,,, ya la hiba a desarmar... hasta que encontre esta
    muchas gracias... si funciona solo que uno tiene que apagarla porque no se apaga sola

    problema resuelto mil gracias

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,601 Answers

Issue An 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution

  1. Press the On button to turn the printer off.
  2. Unplug the power cord from the back of the printer.
  3. Remove all the ink cartridges.
  4. Wait two minutes.
  5. Plug the power cord into the back of the printer.
  6. Press the On button to turn the printer on.
  7. Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved. If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Posted on Nov 01, 2007

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

Probably the plastic gear falling off its axel problem - I wonder why HP does not admit this inherent design problem and publish the solution - they really want everyone to dump their fairly new printer and buy a new one. It is really no big deal to fix for someone with some DIY skills. Refer to http://www.fixya.com/support/t439120-ink_system_failure_error_message

Posted on Oct 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Amigo, só para ajudar a divulgar aos usuários de Bulk. Se o código de erro 0xc18xxxxx ou 0xc19xxxxx do sistema de tinta da impressora HP Photosmart C6180 for exibido no painel dianteiro, faça o resete da seguinte forma:

1- aperte a tecla com sinal # (jogo da velha) e o número 9. Segure as 2 (# + 9) apertadas ao mesmo tempo.

2- desplugue a impressora da energia,

3- ligue (com as teclas ainda apertadas) e espere uns 15 segundos até a impressora desligar.

4- Aí é tudo normal, liga novamente ela pede as configurações iniciais, configuração da linguagem, faz a limpeza e OK!

A tinta preta original da impressora C6180 é pigmentada e as demais corantes. Contudo para o bulk-ink é melhor utilizar só tintas corantes que possuem melhor fluidez, evitando entupimentos e problemas. RESOLVI O PROBLEMA DO MEU BULK-INK SUBSTITUINDO A TINTA PIGMENTADA - QUE VEIO COM O BULK - POR TINTA TIPO CORANTE.

Posted on Feb 01, 2009

I had the same problem. The printer made a clicking sounds during maintenance cycle and gave a ink failure error. Look inside, on the left, in the gears there was a small piece of paper jammed. I removed it and the printer works.

Posted on Dec 29, 2007

  • siskin68 Sep 08, 2011

    The noise may be also generated by a gear which has fallen off the shaft. The mount then grinds at the gear of the printhead.
    If that happens, open the left cover of the printer, find the gear in the unit and bring it back into the shaft. Just clip.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an HP photosmart 3310 printer with an error message: INK SYSTEM HAS FAILED. UNABLE TO COPY, RECEIVE FAXES, OR PRINT. REFER TO PRINTER DOCUMENTATION. ERROR: 0xc18a0106 This comes on whenever I...


Why dont you try uninstalling this form your PC/laptop and reinstalling it again.
This should help restart the printer again.
Good luck and thanks for using Fixya

G.

Jun 14, 2011 | HP Office Equipment & Supplies

2 Answers

Ink system failure


I have a message on my printer
Ink System Failure
ink system has failed -unable to copy, receive faxes,or print.
Refer to printer documentation
error Oxc19a0107

Feb 10, 2011 | HP Photosmart 3310 Printer

1 Answer

I have a message on my printer Ink System Failure ink system has failed -unable to copy, receive faxes,or print. Refer to printer documentation error Oxc19a0002


Hi
Please do this and let me know
Unplug the printer, then pressing the help and ok buttons simultaneously plug it back in.
Let me know or Call +877 889 6859

Jan 06, 2011 | HP Photosmart 3310 Printer

1 Answer

I am getting an error message on my HP Photosmart 3310 as per below: INK SYSTEM FAILURE Ink system has failed. Unable to copy, receive faxes or print. Refer to printer documentation. error: 0xc19a0013...


Hi

There there to much to tell you what to do but I found a link for you to see it will tell you what to do just click on the link it will take you there.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&lc=en&dlc=he&cc=il&lang=he&rule=6783&product=3655608
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks


Nov 24, 2009 | HP Photosmart 3310 Printer

1 Answer

Ink system has failed. Unable to copy, receive


normally in this scenario the whole printer needs to be replaced..

Oct 22, 2009 | HP Photosmart 3310 Printer

1 Answer

Hp 3310 error 0xc18a0201


if you are a tech and have opened one of these before, clean the service station on the right side, oil the carrage rod. time about 1.0 to 1.5 hours. most of the time this is the problem on inkjets.

Feb 21, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Photosmart hp 3310xi - ink failure???


Perform the steps given in the below webpage and if the issue persists then contact HP.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00551397&cc=in&lc=en&dlc=en&product=439491#top

Jun 05, 2008 | HP Photosmart 3310 Printer

6 Answers

Error HP Photosmart 3310. No strart print, no scanning...


I have a Photosmart C6180 all in one and get an error message 0xc18a0101 Ink System has failed. Unable to copy, receive faxes or print. Refer to printer documentation. Error: 0xc18a101.

I put new cartridges in and tried to recalibrate as mentioned by someone on the board. Can anyone help, please?

Nov 16, 2007 | HP Photosmart 3310 Printer

Not finding what you are looking for?
HP Photosmart 3310 Printer Logo

5,591 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...