Question about Denon AVR-E400

Open Question

RESTOR DENON AVR- E400 - Denon AVR-E400

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Kimi

Kimi

  • 277 Answers

SOURCE: Denon AVR 3801

Hi Shadow,

Do you have a problem with your receiver? If so, please let us know and we'll be happy to assist!

Posted on Nov 11, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: How do you reboot the Denon AVR-2807 to factory settings

To reboot, turn receiver off by the small on/off button, not the big standby button. While off press the night and pure direct button at the same time and keep holding them with your right hand while pressing the small on/off button with your left. You will see your receiver menu flash. When you see it flash let go of the night and pure direct button and the receiver will reset it self to the radio station 87.50. The receiver's microprocessor has now been set back to factory. Enjoy this info is straight from Denon's Tech support. I had to do this on mine

Posted on Dec 11, 2007

Robert Johnson

  • 395 Answers

SOURCE: Denon AVR-681 receiver

this manual is the same as the 681 the only difference is the front input and power difference. this web sight http://www.usa.denon.com/AVR1602_682_ownersmanual.pdf

Posted on Jan 13, 2008

EBC ELECTRONICS

  • 163 Answers

SOURCE: Display on Denon AVR-2307 won't work

1. Bad main transformer or
2. bad main fuse/ bad channel.
You need a repair shop.

Posted on Jan 22, 2009

petraman7

Scott Frye

  • 1175 Answers

SOURCE: Manul denon avr-1601 en castellano

http://www.usa.denon.com/ArchivedAVReceivers.asp?archivedModelSearch=true&clearCurrent=true&archivedCategory=AV&archivedModel=AVR-1601&imageField.x=15&imageField.y=13

Espagnol as well ...I think

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While watching TV or even when all components (except the Denon receiver) I hear random noises through speakers. What could be causing this?


Your problem could be a bad dsp processor which is on the hdmi pcb, change that pcb and the problem should quit

Apr 04, 2015 | Denon AVR-E400

1 Answer

Won't turn off when hitting off button. Just turns on main channel. Sometimes get Green screen on startup with either DVD or cable box.


Use factory reset procedure, if that don't work you may have a bad main control relay or the relay control transistor may be bad

Mar 16, 2015 | Denon AVR-E400

1 Answer

How to connect a denon avr-e400 receiver to a televion


If the DENON has an HDMI output, and your TV has an HDMI input, then use a HDMI cable. Then, use the TV's remote-control to select "source" (or "input") as 'HDMI 2' or 'HDMI 3' (assuming that you have been using 'HDMI 1' to watch TV).

Feb 08, 2015 | Denon AVR-E400 7.1 Channel 4K and 3D Pass...

1 Answer

How do I get HDMI cables to sync or talk to each other. We had this problem when we hooked up an Apple TV box to a Denon AVR-E400 and our Sony HD TV. We were told to disconnect all HDMI cables unplug


Personally I would use an RCA cable and hook up the AVR.
((RCA out of TV to AVR audio in))
((cable box HDMI cable output to TV HDMI Input1))
(As far as the AppleTv I would use a separate HDMI Input2)
If your AVR has a dvd or blue ray player Hook up a
HDMI cable out to another Input HDMI3 of the TV
using separate inputs on the tv will allow your surround system to be
used on all modes(CABLE,DVD/BLUERAY,APPLETV)

Sep 27, 2014 | Denon AVR-E400

1 Answer

Network wont come on , says error offline


If you have done a Denon reset and you still get the same thing, the hdmi/network pcb which is on the same board as the hdmi is defective.

Jun 29, 2014 | Denon AVR-E400

1 Answer

Sound goes up and down while watching tv.


Ask the manufacturer:

usa.denon.com/.../ProductDetail.aspx

May 23, 2014 | Denon AVR-E400

1 Answer

Only two speakers work on playback


do you have it in surround mode?

Apr 16, 2014 | Denon AVR-E400

1 Answer

My AVR-E400 sub woffer not working through the Denton system


AVR-E400 has an RCA subwoofer output. This is a line level signal that must be connected to an ACTIVE subwoffer (has its own power amplifier) Also the source must contain subwoffer signal (5.1, 7.1, 9.1 surround sound etc) You will not get subwoffer signal from a stereo source such as audio CD, non-dolby type TV etc. Cheers, Don.

Dec 05, 2013 | Denon Audio Players & Recorders

Not finding what you are looking for?
Denon AVR-E400 Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...