Question about Konica Minolta bizhub 350 All-In-One Laser Printer

1 Answer

Mac address for bizhub 161f

I have link lights on NIC but when printing a config page it reports there is no NIC installed. I have reset device back to factory defaults. Is there some other way of finding the MAC / hardware address of the device?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Konica Minolta Master
  • 6,850 Answers

Are the print driver installed properly was a ip address given to the machine

try this site


Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Posted on Jan 10, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Kevin Hayes
  • 167 Answers

SOURCE: Bizhub C250

In the Utility Menu you can set the default settings for most functions. Set the copier to the state you wish it to be in. Under the utility menu there is a default setting button. This will allow you to set the current state to the default as well as reset to factory default.

Posted on Jan 08, 2008

Kevin Hayes
  • 167 Answers

SOURCE: C252 Mac issue

You need to set the options in the printer driver as well. You need to tell it just what features you have installed on the device.

Posted on Jan 08, 2008

  • 1 Answer

SOURCE: I cant install konica Minolta bizhub C351 on my mac. please HELP

To print via IP on MAC  type IP address in queue type print ,name the printer and  the correct driver/ fy...35/

Posted on Jun 19, 2008

taminol
  • 62 Answers

SOURCE: c14a3 error code konica minolta bizhub 161f

Hi jdt_mk,

Sorry to hear you have a C-14a3 code.
In my experience, this code spells disaster for the 161f.
The image reader has failed. The part can be replaced, but the cost would almost outweigh the cost of replacing the machine.
I have personally had to deal with two 161f with the same code.
Both times we changed the machine (because it was on contract).

Sorry it's not good news

Posted on Jan 29, 2010

  • 1 Answer

SOURCE: konica minolta bizhub c350 installer for mac

You have to have a fiery unit (external controler) to use the C350 With a Mac because the c350 dosnt come with appletalk in the software. IC-401 Is the model number of the controller you will need to connect the c350 to any kind of mac for printing / scanning.

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an HP Lasejet 1320 printer and I am trying to reset static IP Address as we are moving from one network to another. I need to know how I can determine the mac address of the printer as I can...


Hi there,
To find the static IP and Mac Address of your printer, press and hold green button for 10 seconds until green and yellow light starts blinking together, it will take out 3 print outs, 1 is printer information, 2nd will be configuration page, 3rd will be the toner status page,
Also you can Check your printer manual. This is the easiest and fastest way to find the printer's MAC address
Alternatively Print out a configuration page.
If you require more assistance, feel free to reply to this post
Thanks for Asking FixYA!
Regards, BA

Feb 08, 2011 | HP LaserJet 1320 Printer

1 Answer

I get a black line through the copy on the Konica Minolta Bizhub 160. How do I fix it?


if you print a report and there is no line its the adf **** glass so clean it with a rag and glass cleaner

Feb 24, 2010 | Konica Minolta bizhub 161f All-In-One...

2 Answers

Can't find the mac address on a brother laser printer 2170w


page 66 of the network users manual explains how to find the mac address on your printer, you have to print out a test page from the printer and it should give you the info, still get the manual so you can read up more on network settings:

http://www.brother-usa.com/manuals/default.aspx?PGID=1&R3ModelID=hl2170W

Download the manual and make sure you have adobe reader installed on the computer.


Feb 05, 2010 | Brother Office Equipment & Supplies

2 Answers

NetGear WGR614 -Installation Problem on Windows Vista PC


Hi,

Please make sure that you have the NIC enabled and on the computer and set to automatic settings for IP address. Now follow the steps below to reset and reconfigure the router:

Reset:

At the back of the router you will find a small tiny hole (which has a small button inside it). Press the button with the help of a paper clip. and hold it down for 30 seconds. After 30 seconds, please release the button and power off the device for 5 seconds.

CONNECTIONS:

1. Connect a Ethernet cable from the modem to the WAN port of the router(isolated port).
2. Connect the computer to the router using any one of the 4 available ports. Please make sure that THERE IS NO DIRECT CONNECTION BETWEEN THE MODEM AND THE COMPUTERS (either using Ethernet cable or USB cable).
3. Power off the modem and the router after making the connections.
4. Power on the modem and wait for the lights, then power on the router.

RECONFIGURE:

1. Open the browser(Internet Explorer or Mozilla Firefox).
2. Access the router, usually with http://192.168.1.1 or http://www.routerlogin.com.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the username and password is case sensitive).
4. Click on 'Basic settings' from the left menu and select 'Use Computers MAC Address' from 'router MAC Address' section.
5. Click Apply.
6. Once it updates the settings then power off the modem and the router. Power on the modem and wait for the lights, then power on the router.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand


Jul 18, 2009 | NetGear WGR614 Router

1 Answer

Printer's MAC address


Hi!

I was able to locate this information for you on tht Toshiba FAQ section of their tech support site. Here is it, verbatim:

How do I discover the MAC address of the Brother network card?


To discover the MAC address of your Brother network card you will need
to print out a Network Configuration Report. To print this report
complete the following steps:

1. On the Brother machine press MENU.

2. Use the up or down arrow key to scroll to PRINT REPORTS and Press OK.

3. Use the up or down arrow key to scroll to NETWORK CONFIG and Press
OK.

4. Press BLACK START

5. The Network Configuration report will print. On the report, find the
section labeled <(><<)>Ethernet Address>. (Example: <(><<)>Ethernet Address> 00-80-77-90-0a-8c) This is the MAC address of your
Brother network card.

Oct 07, 2008 | Office Equipment & Supplies

1 Answer

Konica Bizhub's Trays


You will need to go to the printers folder under Start, settings, & select the C252, right click on it, select properties & go to the 'Option' tab.
In here input the C252's IP address into the 'printer name or IP address' field and select gather option information.
Once done you will need to apply the settings and ok.
If you dont know the IP address you can get it by going into Utility, user settings, print reports, config page.
You should now be able to select the correct trays without errors.

Hope this Helps.

May 13, 2008 | Konica Minolta bizhub C250 All-In-One...

3 Answers

Problem in configuring IP address in Konica Minolta bizhub 210 Copier, Printer, Fax


Is there network card is installed in it, if yes then you can configure it with your network go to machine Manu in machine control panel and the in network settings here you can give the IP address and subnet mask after then reboot the machine.
If network card is no installed behind the machine then you can use its built-in USB or and parallel printer without NIC card.

Feb 01, 2008 | Konica Minolta bizhub 250 All-In-One Laser...

4 Answers

DPR-1260 ... prints but cannot access web config page


To get into the web configuration you need to know your firmware on the DPR-1260. If it is 1.12, us http://dlinkps-xxxxxx where the X's are the last 6 number of the mac address. If it is 1.20 and up, use http://dlink-xxxxxx, where the x's are the last 6 number of the mac address. If you do set it up as DHCP or static and know the ip address of the print server just type in the ip address of the print server on the address bar.

Oct 21, 2007 | D-Link RangeBooster G DPR-1260 (DPR1260)...

6 Answers

How do I reset access password?


Thanks. I actually found out that it had never been configured - here is the standard factory access info: All Oki network printing devices support configuration changes via a standard web browser such as Internet Explorer or Netscape Navigator. When applying a configuration change to a device the user is prompted for a user name and password. The following details should be entered: User Name: root Password: last six digits of the MAC address* *You can find the MAC address on the network summary web page or by printing off a menu from the printer.

Nov 22, 2006 | Okilan 8100e Print Server

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...