Question about Minolta Di3510f Bizhub Copier

1 Answer

C0500 malfunction code c0500

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Minolta Master
  • 1,449 Answers

To reset Error codes C0500 and C0501, perform the following steps.

1-Turn the machine "OFF".
2-Press the "STOP" button on the basic panel.
3-Keep the button pressed and turn the machine "ON".
4-Do not release the button, until the machine warm up.
5-After few seconds Error code will remove and machine will reset.Basic menu will show no error on LCD screen.This means error code has been removed and photocopier machine is ready to use.

Posted on Jul 17, 2014

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
babaprithi

Prithi Singh

  • 372 Answers

SOURCE: Minolta EP2080 malfunction detected ...

the laser unit of the machine is faulty.either the polygon motor in the laser unit is not working or the laser diode is not working.anyways u have to replace the laser unit to make it work and it is costly so better buy a new machine

Posted on Aug 16, 2011

Carl

  • 1 Answer

SOURCE: A MALFUNCTION WAS DETECTED - CODE C0500

The dinosaur copier is not connected to the computer as I have a multi-functional printer instead. The Minolta Dialta, model AFR-14, is likely older than I am:)

Posted on Jul 18, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Malfunction code c0500


In minolta copiers the C5xx codes refer to fuser unit malfunctions.Verify the fuser unit gears,the fuserheater lamp continuity and the thermofuses continuity.To reset the codes please the copier model and I tell you the reset method.

Mar 01, 2013 | Konica Minolta Office Equipment & Supplies

1 Answer

C0500 error code


Step 1:

The error code fusing unit heater lamp malfunction.2_4_2013_7_43_37_pm.jpg2_4_2013_7_44_01_pm.jpg

Step 2:

Select the trouble reset and exit.If the error code appire again remove the fusing unit and repair.

Feb 03, 2013 | Minolta DiALTA Di250 All-In-One Laser...

1 Answer

Minolta Dialta Di200 malfunction


1-The C0500 code can be reset following the steps below: find a small
hole on the right side of the control panel. press it using a paper clip
2) When the dot appears on the LCD after reboot, press the number 3 key.
3) The mode will change to the initialization screen.
4) Choose the selection for trouble reset.
5) After reboot the code will be cleared.

good luck

Feb 10, 2010 | Konica Minolta DiALTA Di200 Copier

1 Answer

When i insert a fuserunit immediately the message


This cuuld be the heat hamp or thermo furse need to call for service.

Feb 01, 2010 | Office Equipment & Supplies

1 Answer

C0500 error code


Verify the continuiti of the thermofuse and the heater lamp,cleaning it reset the malfunction codes to open /close the front door or enter in the service code Stop-00-Stop-01,acces 3 after appaire the * in the left side in the touch pannel,reset to trouble icons,press exit and total reset button twice.

Dec 07, 2009 | Konica Minolta DiALTA Di200 Copier

2 Answers

Malfunction detected, code CO500 on our printer, model Di251.


my di2010 has a co500 code on it after someone tried to run a transparency thru it.

Jun 25, 2009 | Minolta Di251 All-In-One Printer

1 Answer

I'm getting a malfunction code C0500


C0500 is a heater failure, the fuser section failed to get to the desired temp in a given period of time.

Try resetting the code, there is a reset switch behind the access panel,at the contrast knob inside the machine.


Hope this helps.
ed

May 04, 2009 | Konica Minolta Office Equipment & Supplies

3 Answers

IMAGISTICS 2620 Error code C0500


How to reset malfunction code C0500 of a imagistic

Feb 03, 2009 | Konica Minolta DiALTA Di200 Copier

4 Answers

Minolta di 2510 code c0500


lo ke pasa es ke mi copiadora ya no responde mas y me sale este error una averia "a sido detectada avice a su servisio tecnio y digalke el codigo c0500" ya no se ke hacer... ayuda por favor..

Jun 24, 2008 | Minolta Di2510 All-In-One Laser Printer

1 Answer

Minolta Dialta Copier


C0500 refers to a low fuser temperature. You can attempt to clear the code by using the tech rep service mode. Go to "Counter" Go to "Trouble" Trouble reset If "warm Restart Swich" is asked for- This can be actuated through a small access hole on the right side of the control panel, using a straightened paper clip or something similar. You may need to clear the counter by pressing "clear" and then "end". After clearing the code, power cycle the copier. If it comes to "ready" you are all set. If not, you may have a blown heat lamp or thermal fuse which would need to be replaced by a technician. Good Luck!!

May 10, 2007 | Konica Minolta DiALTA Di200 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1316 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6862 Answers

Ed
Ed

Level 3 Expert

479 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...