Question about NetGear N600 Wireless Dual Band Router
Blinking only started since the technition changed my dsl line to a fiber optics line
Posted by Anonymous on
You might be dealing with netgear router problems due to the several reasons. visit askprob community and follow the instructions to fix the problem. Why Is My Netgear Router Blinking Orange Internet Light Ask Prob
Posted on Nov 14, 2018
Orange light means no internet connection.
Check the cable and settings.
Posted on Mar 08, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Wireless LED blinking, normal?
i'm having the same probs but, to answer your concern over the blue lights,her'es the deal.
your router has 7 antennas inside and each of the led's represents an antenna. as the router scans for something to connect to the led's will blink. it will eventually lock on to a signal from a wireless laptop or usb reciever and the 2 strongest signals will be used for transmitting/recieving data, shown by 2 solid led's.
Posted on Mar 13, 2008
SOURCE: netgear router
First I need to know the following infor to provide you some solution to your router problem;
Internet Service Provider:
Modem Brand Name:
Laptop Model Numbe:
Posted on Aug 09, 2008
This sounds like a common conflict fault.
There are a few things you can do to help reliability
You should first make sure that the modem and router are individually
set up correctly.
Read the guide for router and modem first and if any of it may apply to you then try and do it.
Try the following procedure and write down anything you change so that if you need to go back you know what was changed.
Connect ONLY the MODEM to a pc by wire and nothing else
Go to the start menu and select RUN
In the box type "cmd"
Now in the black screen that has come up type "ipconfig /all"
Take note of the numbers that are in 4 groups e.g. 192.168.1.1
Also take note of the name in front of those numbers !
Write down any numbers where it says DNS too as they may be useful (you only need the ones with numbers not the ones with letters)
Now do the same thing with your modem
If that too has the same IP as your router in "default gateway" then you need to fix that issue as that is probably a part of your problems.
The fix for router modem conflict is to set the router to use a different IP range.
To do this only have the router connected (by wire) and open an internet explorer page (it will fail but that's ok)
In the address bar type the number you got for default gateway above for the router e.g. 192.168.1.1 and press ENTER
When it asks for the user name, give it the one you gave it when you set the router up or the default one from your manual
Also give it the password you gave it when you set it up or once again the default one from the manual.
You now need to look for a box that has the number you just used to get into the router.
It may just say IP address or Starting IP or something similar
That is the number you should change. I usually change the third block e.g. 192.168.2.1 as opposed to 192.168.1.1
You should also have some DNS numbers from the checks further up with the MODEM
You should find the DNS boxes and place those numbers in there. This will allow your computer quicker access to finding things on the internet
Now look for the save settings button and do so.
Reconnect the modem and router. The cable from the modem should go to the YELLOW socket on the router.
Power up the modem and WAIT until all the correct lights are on.
Then do the same with the router.
Now power up a pc and check that you can surf without problems
If not then the problem may lay elsewhere. Go back and re-check.
That should help you out
Posted on Sep 07, 2009
Maybe you had a power surge.
The reset button does nothing with the router powered off, basically you hold the reset button in for 30 seconds with the router powered on. Following this you will need to set up the router again as all settings will be reset to factory defaults, from the sounds of it though the router may be dead.
Another reset method is as follows;
1. With the router powered off hold in the reset button,
2. Keep the reset button in, power on the router, wait 30 seconds,
3. Keep the reset button in, power off the router, wait 30 second,
4. Release the reset button.
Did you have wireless disabled?
If you have access to a multimeter check the PSU is working correctly.
Posted on Feb 04, 2010
Tips for a great answer:
Sep 09, 2014 | Computers & Internet
Jun 22, 2014 | NetGear WGR614 Wireless Router
May 16, 2014 | NetGear N600 Wireless Dual Band Router
Sep 09, 2012 | NetGear WNDR3300-100UKS Wireless Router
Aug 04, 2011 | D-Link DSL-G604T Wireless Router
Jan 10, 2011 | NetGear WGT624 Wireless Router
Nov 30, 2010 | Belkin (F5D7231UK4) Wireless Router
Oct 05, 2010 | Belkin Computers & Internet
Aug 10, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...
185 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: