Question about Sharp AR-5316 Advanced Digital Imager Copier

1 Answer

Sharp AR-5127 error code F2-04 - Sharp AR-5316 Advanced Digital Imager Copier

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 66 Answers

CRUM data read trouble
Replace the toner cartridge.
Replace MCU PWB.
Replace MCU PWB EEPROM
Check and fix connection between
CRUM (toner cartridge) and MCU
PWB.

Posted on Apr 21, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
mickspaceNET
  • 115 Answers

SOURCE: error messsage cal for service E1-88 from sharp AR-5127

Unplug the Machine, remove the board you installed, re-seat the board,
make sure everything is connected, turn machine back on..

This is what the Manual says:
IMC PWB communication trouble (Timeout)
Check the connectors of the IMC PWB
and MCU PWB.
Check the grounding of the copier.

If you need further help let me know..

Posted on Oct 26, 2008

  • 37 Answers

SOURCE: AR-5127 Counter Reset

Try these steps

1.Press continously #key then Interrupt key then CA key then # key


2.If the display turns off it means that you are inside the simulation but if not do again step 1.


3.Press 81 then press enter then press 1 then enter


Hope that this will help to reset .

Posted on Mar 03, 2009

  • 14 Answers

SOURCE: Sharp AR-5127, the error code U2-40

Try clearing it with a p*c* 16 . If not clear, CHange the toner, it has a defective crum (counter chip) on the back of it.

Posted on May 08, 2009

M2Tech1
  • 313 Answers

SOURCE: ERROR CODE U2-40: SHARP AR 5127

ERROR CODE U2-4 COULD BE RELATED TO THE MEMORY BATTERY BEING DEAD ON TEH MAIN BOSRD IF IT IS AN OLD MACHINE SO YOU COULD CHECK THSI OR REPLACE AND TRY WITH NEW

Posted on Jun 12, 2009

  • 268 Answers

SOURCE: Solution for SHARP AR 5127 error U2-40 call for service

This means that the cartridge's sensor is miscommunicating with the copier memory thus the code U2 -40. You should clean the inner sensor connector and the toner sensor of the spilled toner by low blower. Perform this code ;# , interrupt , C, Interrupt keys in that order and press 16 then Print key and the code will be cleared.

Posted on Feb 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Solution for SHARP AR 5127 error U2-40 call for service


This means that the cartridge's sensor is miscommunicating with the copier memory thus the code U2 -40. You should clean the inner sensor connector and the toner sensor of the spilled toner by low blower. Perform this code ;# , interrupt , C, Interrupt keys in that order and press 16 then Print key and the code will be cleared.

Feb 02, 2010 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

ERROR CODE U2-40: SHARP AR 5127


ERROR CODE U2-4 COULD BE RELATED TO THE MEMORY BATTERY BEING DEAD ON TEH MAIN BOSRD IF IT IS AN OLD MACHINE SO YOU COULD CHECK THSI OR REPLACE AND TRY WITH NEW

Jun 12, 2009 | Sharp AR-5316 Advanced Digital Imager...

4 Answers

Sharp AR-5127 H2-00 code reset


Sharp Fuser
H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.

Feb 01, 2009 | Office Equipment & Supplies

3 Answers

Error code sharp 5127


go to percision roller in phx arizona you can get all sharp service manuels i have alos seen them on ebay?

Jan 28, 2009 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Sharp AR-5127 H2-00 code reset


it is a heater code. The thermostat has blown and resetting the code could cause a fire, but it probably won't do anything, the part will need to be replaced

Jan 16, 2009 | Toshiba e-Studio162D Copier

1 Answer

Sharp AR-5127, the error code U2-40


U2-40 is a board error, F1-15 is finisher lift motor error.

To reset: #, interrupt, clear, interrupt. (screen should say service mode), enter 16, print, are you sure? , yes.

For the finisher error, follow above procudure, entering 14 instead of 16. if error returns, disconnect the finisher

Nov 26, 2008 | Office Equipment & Supplies

7 Answers

Sharp AR-5127, the error code U2-40


SOLUTION: ERROR MESSAGE U2-40, SHARP COPIER AR-5127
PRESS #
PRESS =
PRESS C
PRESS =
TYPE 16
PRESS ENTER BUTTON (the button for making photocopy)
PRESS 'OK' TWICE
Note: be fast in pressing all the buttons.
FROM EKPA ONU - (+2348055790979, NIGERIA,LAGOS)

Apr 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

13 Answers

Error code 4H on sharp ar 5316


WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.

Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...