Question about Bose Acoustimass 10 III System

2 Answers

Bose audio input receiver cable 15 pin

I bought a Bose acoustimass 10 serie III system but I haven't the cable for the audio input!!
The cable that I need is a female D SUB (D-type connector) with 15 pin (8pins above and 7pins under) from de acoustimass to the receiver!
Can someone tell me were I can buy these cable?

Thanks in advance

Lydricgalland@yahoo.com

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 10 Answers

You can buy it on ebay but it's cheaper just to make one. If you can solder, all you need is a female 15-pin d-type connector and a bunch of speaker wire. Here is a diagram of the connections.

Bose audio input receiver cable 15 pin - eef34d9.jpg

3_15_2013_4_16_30_am.jpg

Posted on Mar 22, 2010

  • burnair Feb 05, 2011

    Where can you find this 15 pin D- sub as most are smaller.
    Please E-mail me at burnair@aol.com
    Thanks

  • jc montero Mar 15, 2013

    hi can you please email me that diagram you posted on the connections to kronix64@hotmail.com thanks

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Assemble the dsub 15pin Soldered it..when i connect to my amplifier has some error it says " overload".

Posted on Mar 31, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i find a bose 15 pin input cable for the acoustimass model?


Try eBay. Lots of Bose cables. Search engines provide faster answers than tossing something like this out to us for a possible answer.

Sep 27, 2011 | Bose Acoustimass 10 III System

1 Answer

Need new system input cable for acoustimass 10


I've made a diagram of my serial cable. You can easily make one with some speaker wire and a 15-pin d-type female serial connector. Solder the wires as shown in the diagram.

6ac4306.jpg

Jan 26, 2010 | Bose Acoustimass 10 III System

1 Answer

Gap contact


You can try and use another cable. I've read before that changing the cable can fix that problem. If you know how to solder you can make your own cable. All you need is a female 15-pin d-type connector and some speaker wire. Here's a diagram of the connections:

6e516bf.jpg

Sep 28, 2009 | Bose Acoustimass 10 II System

1 Answer

I have a pair of redline bose cube speakers and an acoustimas. I don't have cable for the connection. I would appreciate if someone help me showing diagram and which cable I should use it. Thanks


You can make a serial cable for it. All you need is a 15-pin d-type female connector and a bunch of speaker wire. Solder the speaker wire as shown in my diagram.

a0b0655.jpg

Sep 22, 2009 | Bose Acoustimass 10 III System

1 Answer

I have a Bose Amas 10 III with 15pin input and 3 Blue female rca Front Center R and L and 2 Yellow female rca rear R and L is there a special rca to + and _ for output?


rca jacks by design separate possitive and negative. not sure what you are trying to do but make sure that you are not trying to hook up the bose speakers directly to your reciever, you will blow them.

Aug 06, 2009 | Bose Acoustimass 10 III System

1 Answer

Bose Acoustimass 15 subwoofer is completely dead.


Clarify, did it ever work for you? Were both receivers used properly configured for the subwoofer? Did you also test the other speaker moduels running off the subwooferto see if they work?

Speaker Receiver setting
• Left and right LARGE
• Center LARGE
• Left and right surround LARGE
• Center surround* LARGE
• LFE/Subwoofer ON
With an Acoustimass 16 Series II system or upgraded Acoustimass 15 Series IlI system only.

Apr 23, 2009 | Yamaha RX-V663 Receiver

1 Answer

How to make a 15 pin female sound in cable


Ya, here is a diagram I made of my Acoustimass 10 IV input cable. All you need is a female 15-pin d-type connector and a bunch of speaker cable (also one RCA connector for sub connection). Here's my diagram:

628d111.jpg

Mar 10, 2009 | Bose Acoustimass 10 III System

1 Answer

My sound in cable was missplase and can i make it my self and pls any body can send me the cable structre. pls...........


Here's a diagram of the 15-pin serial input cable that came with my Acoustimass 10 IV system. You just need a 15-pin female d-type connector, one RCA connector and a lot of speaker wire. Here's my diagram:

ef142c2.jpg

Mar 10, 2009 | Bose Acoustimass 10 III System

Not finding what you are looking for?
Bose Acoustimass 10 III System Logo

17,532 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...