Question about Sharp MX-2700N Color Copier

Open Question

Mx 2700n counter clear - Sharp MX-2700N Color Copier

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
rezazadeh
  • 328 Answers

SOURCE: Sharp MX-2700N how can I clear maintenace code CA?

enter code 20-1 start

Posted on May 27, 2010

Ad
  • 453 Answers

SOURCE: sharp mx -2700n error

3838e66.gif look at the picture if not understand replay me.

Posted on Oct 28, 2010

  • 14 Answers

SOURCE: WHAT IS A CA CODE ON A SHARP MX-2700N

Believe it or not, it means "Check All". It's kind of like a Check Engine light in a car. Typically it is caused by a door not being closed completely. On your model, the most likely culprit is the door on the right side of the machine that slides out on rails. Open it, make sure there are no obstructions, and slam it shut. These machines are notorious for the right side door becoming slightly warped, and they don't recognize that the door is shut if you try to gently close it. Don't try to knock the machine off of it's stand when you close it, but do it quickly and with a bit of purpose.

Posted on Feb 28, 2011

  • 66 Answers

SOURCE: what does code DK indicate

IT MEANS YOUR BLACK DRUM AND DEVELOPER NEEDS REPLACEMENT, IF NO PROPBLEMS ARE THERE IN YOUR CPY QUALITY YOU CAN RESET THIS BY PRESSING #*c* BUTTON RESPECTIVELY WITH NOT MUCH TIME DELAY IN BETWEEN THE KEYS, THEN MACHINE WILL ASK FOR MAIN CODE THEN PRESS 2 AND 4 THEN PRESS START THEN YOU CAN SEE THE DRUM AND DEVELOPER COUNTER RESET SELECT THAT BLACK DRUM AND PRESS OK THEN DELOPER ALSO LIKE THIS THIS WILL RESOLVE YOUR PROBLEM, IF ANY QUERIES FEEL FREE TO CONTACT AND VOTE AND RATE THIS AFTER GETTING YOUR PROBLEM RESOLVED.

Posted on Jun 13, 2011

Cogz
  • 1326 Answers

SOURCE: About white dots is every single color in SHARP

Have you cleaned the optic's???? Also, I would check the fixingr unit and also have you changed the developers???? Do the white dots show up in all the colors in the same spot? Make single color copies to see that. If it only show in one or two colors then that is where the problem is... Good Luck

Posted on Jun 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change copy amount in counter


You can only reset copy counter only

May 29, 2014 | Sharp MX-2700N Color Copier

1 Answer

Erro na sharp mx 3100n U2-80


On the control Panel, press the keys #*C* (pound, star,clear,star)to enter test mode. Enter number 16 and press the copy button. On the touch screen press "execute" and "yes". Press CA to reboot. The error code should clear.

Aug 03, 2012 | Sharp MX-2700N Color Copier

1 Answer

What does code DK indicate on an MX-2700N?


IT MEANS YOUR BLACK DRUM AND DEVELOPER NEEDS REPLACEMENT, IF NO PROPBLEMS ARE THERE IN YOUR CPY QUALITY YOU CAN RESET THIS BY PRESSING #*c* BUTTON RESPECTIVELY WITH NOT MUCH TIME DELAY IN BETWEEN THE KEYS, THEN MACHINE WILL ASK FOR MAIN CODE THEN PRESS 2 AND 4 THEN PRESS START THEN YOU CAN SEE THE DRUM AND DEVELOPER COUNTER RESET SELECT THAT BLACK DRUM AND PRESS OK THEN DELOPER ALSO LIKE THIS THIS WILL RESOLVE YOUR PROBLEM, IF ANY QUERIES FEEL FREE TO CONTACT AND VOTE AND RATE THIS AFTER GETTING YOUR PROBLEM RESOLVED.

Jun 12, 2011 | Sharp MX-2700N Color Copier

1 Answer

Maintenance code TA does the printer go offline


Ok so the TA code means that the all maintenance counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code 04
Then you can select what you want to clear so the maintenance count all
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you.

Jun 05, 2010 | Sharp MX-2700N Color Copier

1 Answer

What is "Maintenance required. Code: AA"


Maintenance timing display The message of maintenance execution timing is displayed when each counter reaches the set value. The relationship between the messages and the counters is shown blow. Maintenance counter AA WhenThe maintenance counters (both of total and color) reaches 90% of the set value of SIM21-1 (When the setting of SIM26-38 is ?print stop?). When The maintenance counters (both of total and color) reaches the set value of SIM21-1 (When the setting of SIM26-38 is ?print allowing?). Enable ? After completion of the maintenance, execute SIM 24-4 (Maintenance counters (total, color) clear).

Aug 29, 2009 | Sharp MX-2700N Color Copier

1 Answer

What do it do to fix ''maintenance required Code: CA''


The service acces code C-0-0-C,or C - interupt key -0-interupt key.Acces the list of commands maintenance preset counter setting and set to a new value,or maintenance counter clear.

Aug 01, 2009 | Sharp Office Equipment & Supplies

2 Answers

Sharp-MX2700N Maintenance Code VK


VK = 100,000 pages printed on the developer counter or 715,000 revolutions of the developer unit (as mixing can occur even when pages are not being printed). Developer can break down over time and or the seals can be damaged - so service by a technician is indicated. If maintenance was recently performed and the developer replaced then the counter needs to be reset.

Feb 04, 2009 | Sharp MX-2700N Color Copier

1 Answer

Call for service: code U2-05


i think that u2 shows some memory or eeprom problem just reset it .press clear key,exposure mode key,clear key,exposure mode key,press all these key in sequence and quickly.display will go dead now press 16 then start key.code will bi removed .mian jee

Jan 16, 2009 | Sharp MX-2700N Color Copier

1 Answer

Sharp mx 2700n how to go SP mode and i get error code h5.01 how i solve this problem


Use SIM14 to
cancel the trouble.

Entering the simulation mode
1) Copy mode key ON → Program key ON → Asterisk (*) key
ON → CLEAR key ON → Asterisk (*) key ON → Ready for input of a main code of simulation
enter 14
accpet yes clear..
machine should restart.
You may have to have a tech look into why this is jamming...

Hope that helps
Lbcoaster

Dec 23, 2008 | Sharp MX-2700N Color Copier

Not finding what you are looking for?
Sharp MX-2700N Color Copier Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...